ABLIC U.S.A. Inc.
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
S-8209AAB-T8T1U
Binêre Detail DataSheets

S-8209AAB-T8T1U

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Detector
  • Characteristics: Low Power Consumption, High Accuracy
  • Package: TSSOP-8
  • Essence: Monolithic CMOS IC
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Supply Voltage Range: 1.6V to 6.0V
  • Detection Voltage Range: 1.2V to 5.0V (in 0.1V steps)
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 1.0μA (typical)

Detailed Pin Configuration

The S-8209AAB-T8T1U has a total of 8 pins arranged as follows:

```

| | --| VDD GND |-- Pin 1: Ground (GND) --| VIN RST |-- Pin 2: Reset Output (RST) --| VOUT VDD |-- Pin 3: Supply Voltage (VDD) --| NC NC |-- Pin 4: Not Connected (NC) --| NC NC |-- Pin 5: Not Connected (NC) --| NC NC |-- Pin 6: Not Connected (NC) --| NC NC |-- Pin 7: Not Connected (NC) --| NC NC |-- Pin 8: Not Connected (NC) |___________| ```

Functional Features

  • Voltage detection with high accuracy
  • Built-in delay circuit for stable output
  • Low power consumption for energy efficiency
  • Wide supply voltage range for versatile applications
  • Small package size for space-constrained designs

Advantages and Disadvantages

Advantages: - High accuracy voltage detection - Low power consumption - Wide supply voltage range

Disadvantages: - Limited pin configuration options - Not suitable for high-speed applications

Working Principles

The S-8209AAB-T8T1U is a voltage detector IC that monitors the input voltage and provides a reset signal when it falls below a certain threshold. It operates based on the principle of comparing the input voltage with an internal reference voltage. When the input voltage drops below the detection voltage, the reset output becomes active, indicating a low voltage condition.

Detailed Application Field Plans

The S-8209AAB-T8T1U finds applications in various electronic devices where accurate voltage monitoring is crucial. Some potential application fields include: - Battery-powered devices - Power management systems - Microcontroller-based systems - Portable consumer electronics

Detailed and Complete Alternative Models

  • S-8209BAC-T8T1U: Similar voltage detector IC with adjustable detection voltage
  • S-8209CAC-T8T1U: Voltage detector IC with higher accuracy and lower quiescent current
  • S-8209DAD-T8T1U: Dual voltage detector IC with independent detection voltages

Note: This list is not exhaustive and there may be other alternative models available from different manufacturers.

Word count: 320 words

10 pirs û bersivên hevpar ên têkildarî sepana S-8209AAB-T8T1U di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of S-8209AAB-T8T1U in technical solutions:

Q1: What is S-8209AAB-T8T1U? A1: S-8209AAB-T8T1U is a specific model of integrated circuit (IC) used for voltage protection and power management in various technical solutions.

Q2: What are the key features of S-8209AAB-T8T1U? A2: Some key features of S-8209AAB-T8T1U include overvoltage protection, undervoltage lockout, reverse voltage protection, and low quiescent current consumption.

Q3: How can S-8209AAB-T8T1U be used in technical solutions? A3: S-8209AAB-T8T1U can be used as a voltage protection and power management component in applications such as battery-powered devices, IoT devices, portable electronics, and automotive systems.

Q4: What is the operating voltage range of S-8209AAB-T8T1U? A4: The operating voltage range of S-8209AAB-T8T1U is typically between 2.5V and 6.0V.

Q5: Does S-8209AAB-T8T1U support overvoltage protection? A5: Yes, S-8209AAB-T8T1U provides overvoltage protection by clamping the voltage to a safe level when it exceeds a certain threshold.

Q6: Can S-8209AAB-T8T1U protect against reverse voltage? A6: Yes, S-8209AAB-T8T1U has built-in reverse voltage protection, which prevents damage to the circuitry in case of reverse polarity connection.

Q7: What is undervoltage lockout (UVLO) and does S-8209AAB-T8T1U support it? A7: Undervoltage lockout (UVLO) is a feature that disables the circuit when the input voltage falls below a certain threshold. Yes, S-8209AAB-T8T1U supports UVLO.

Q8: Can S-8209AAB-T8T1U be used in automotive applications? A8: Yes, S-8209AAB-T8T1U is suitable for automotive applications as it can handle the required voltage levels and provides protection against voltage fluctuations.

Q9: Does S-8209AAB-T8T1U have low power consumption? A9: Yes, S-8209AAB-T8T1U has low quiescent current consumption, making it suitable for battery-powered devices where power efficiency is crucial.

Q10: Are there any application notes or reference designs available for S-8209AAB-T8T1U? A10: Yes, the manufacturer of S-8209AAB-T8T1U typically provides application notes, datasheets, and reference designs to assist engineers in implementing the IC effectively in their technical solutions.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and specifications for S-8209AAB-T8T1U.