ABLIC U.S.A. Inc.
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
S-8215AADH-K8T2U

S-8215AADH-K8T2U

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SOT-89-5
  • Essence: Voltage Detector with Delay Circuit
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 1.6V to 6.0V
  • Output Voltage Options: 1.2V, 1.5V, 1.8V, 2.5V, 3.0V, 3.3V, 5.0V
  • Output Current: 50mA
  • Quiescent Current: 1.0µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-8215AADH-K8T2U has a total of 5 pins: 1. VDD: Input voltage pin 2. GND: Ground pin 3. OUT: Output voltage pin 4. EN: Enable pin for controlling the output 5. DELAY: Delay time setting pin

Functional Features

  • Voltage Detection: Monitors the input voltage and provides an accurate output voltage based on the selected option.
  • Delay Circuit: Incorporates a delay feature that ensures stable output voltage after power-on or voltage fluctuations.
  • Low Power Consumption: The quiescent current of only 1.0µA makes it suitable for battery-powered applications.
  • Overcurrent Protection: Safeguards the circuit by limiting the output current in case of excessive load.

Advantages and Disadvantages

Advantages: - High efficiency and low power consumption contribute to energy savings. - Wide input voltage range allows compatibility with various power sources. - Small package size (SOT-89-5) enables space-saving designs. - Overcurrent protection enhances the reliability of the circuit.

Disadvantages: - Limited output current of 50mA may not be sufficient for high-power applications. - The delay circuit may introduce a slight delay in achieving stable output voltage.

Working Principles

The S-8215AADH-K8T2U operates by continuously monitoring the input voltage. When the input voltage falls within the specified range, the IC provides a stable output voltage based on the selected option. The delay circuit ensures that the output voltage stabilizes after power-on or voltage fluctuations, preventing any sudden changes that could affect connected devices.

Detailed Application Field Plans

The S-8215AADH-K8T2U is commonly used in various electronic devices and systems, including but not limited to: - Battery-powered devices: Portable electronics, wireless sensors, remote controls. - Power management systems: Voltage regulators, battery chargers, power supplies. - Automotive applications: Vehicle electronics, infotainment systems, lighting control.

Detailed and Complete Alternative Models

  1. S-8215AABH-K8T2U: Similar to S-8215AADH-K8T2U, but with different output voltage options.
  2. S-8215AACD-K8T2U: Voltage detector with delay circuit in a different package (SSOP-5).
  3. S-8215AAEH-K8T2U: Enhanced version with higher output current capability (100mA).

These alternative models offer similar functionality and can be considered as substitutes depending on specific requirements.

Word count: 305 words

10 pirs û bersivên hevpar ên têkildarî sepana S-8215AADH-K8T2U di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of S-8215AADH-K8T2U in technical solutions:

  1. Q: What is the S-8215AADH-K8T2U? A: The S-8215AADH-K8T2U is a voltage detector IC with a built-in delay circuit and watchdog timer.

  2. Q: What is the purpose of the S-8215AADH-K8T2U? A: It is designed to monitor the voltage level of a power supply and provide a reset signal when the voltage falls below a certain threshold.

  3. Q: What is the operating voltage range of the S-8215AADH-K8T2U? A: The operating voltage range is typically between 0.9V and 6.0V.

  4. Q: How does the delay circuit work in the S-8215AADH-K8T2U? A: The delay circuit ensures that the reset signal is not immediately triggered when the voltage drops, but instead provides a delay before asserting the reset signal.

  5. Q: Can I adjust the delay time in the S-8215AADH-K8T2U? A: Yes, the delay time can be adjusted by connecting an external capacitor to the CT pin.

  6. Q: What is the purpose of the watchdog timer in the S-8215AADH-K8T2U? A: The watchdog timer monitors the system's operation and resets the system if it detects any abnormal behavior or lock-up conditions.

  7. Q: What is the typical reset voltage threshold of the S-8215AADH-K8T2U? A: The typical reset voltage threshold is around 2.93V.

  8. Q: Can I use the S-8215AADH-K8T2U in battery-powered applications? A: Yes, the low operating voltage range makes it suitable for battery-powered applications.

  9. Q: Does the S-8215AADH-K8T2U have any built-in protection features? A: Yes, it has built-in overvoltage and undervoltage detection circuits to protect against voltage spikes and drops.

  10. Q: What is the package type of the S-8215AADH-K8T2U? A: The S-8215AADH-K8T2U is available in a small SOT-89-5 package.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.