ams
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
TSL26711FN
Binêre Detail DataSheets

TSL26711FN

Product Overview

The TSL26711FN belongs to the category of light-to-digital converters and is commonly used for ambient light sensing in various electronic devices. This sensor possesses characteristics such as high sensitivity, low power consumption, and a small package size. The essence of the TSL26711FN lies in its ability to accurately measure ambient light levels and convert them into digital signals. It is typically available in a small package with a specified quantity per reel.

Specifications

  • Operating Voltage: 2.7V to 3.6V
  • Ambient Light Sensing Range: 0.01 lux to 64,000 lux
  • Interface: I2C
  • Package Type: FN (2mm x 2mm)

Detailed Pin Configuration

The TSL26711FN features a standard pin configuration with specific pins designated for power supply, I2C communication, and output signals. The detailed pinout is as follows: 1. VDD - Power Supply 2. SDA - I2C Data 3. SCL - I2C Clock 4. INT - Interrupt Output 5. ADDR - I2C Address Selection 6. GND - Ground

Functional Features

The TSL26711FN offers the following functional features: - High sensitivity across a wide range of ambient light levels - Low power consumption, making it suitable for battery-powered devices - I2C interface for easy integration with microcontrollers - Interrupt output for efficient power management

Advantages and Disadvantages

Advantages

  • Accurate ambient light sensing
  • Small package size for space-constrained designs
  • Wide operating voltage range

Disadvantages

  • Limited to I2C interface only
  • May require additional circuitry for specific applications

Working Principles

The TSL26711FN operates based on the principle of converting incident light into a digital signal using an integrated photodiode and ADC. The sensor's internal circuitry processes the analog signal and provides a digital output, which can be accessed through the I2C interface.

Detailed Application Field Plans

The TSL26711FN finds extensive application in various fields, including: - Mobile devices for automatic display brightness adjustment - Wearable devices for adaptive lighting control - Industrial equipment for ambient light monitoring - IoT devices for smart home automation

Detailed and Complete Alternative Models

Some alternative models to the TSL26711FN include: - TSL257-LF Series by ams AG - OPT3001 by Texas Instruments - APDS-9300 by Broadcom Limited

In conclusion, the TSL26711FN is a versatile light-to-digital converter that offers high sensitivity and low power consumption, making it suitable for a wide range of ambient light sensing applications.

[Word Count: 372]

10 pirs û bersivên hevpar ên têkildarî sepana TSL26711FN di çareseriyên teknîkî de navnîş bikin

  1. What is the TSL26711FN sensor used for?

    • The TSL26711FN sensor is used for ambient light sensing and proximity detection in various technical solutions.

  2. What is the operating voltage range of the TSL26711FN sensor?

    • The operating voltage range of the TSL26711FN sensor is typically 2.7V to 3.6V.

  3. How does the TSL26711FN sensor communicate with a microcontroller?

    • The TSL26711FN sensor communicates with a microcontroller using an I2C interface.

  4. What is the typical proximity detection range of the TSL26711FN sensor?

    • The typical proximity detection range of the TSL26711FN sensor is up to 100mm.

  5. Can the TSL26711FN sensor be used in outdoor applications?

    • Yes, the TSL26711FN sensor can be used in outdoor applications as it has a wide dynamic range and high sensitivity.

  6. What is the spectral response range of the TSL26711FN sensor?

    • The spectral response range of the TSL26711FN sensor is from 200nm to 1050nm.

  7. Does the TSL26711FN sensor have built-in infrared LED drivers for proximity detection?

    • Yes, the TSL26711FN sensor has built-in infrared LED drivers for proximity detection.

  8. Is the TSL26711FN sensor suitable for use in mobile devices?

    • Yes, the TSL26711FN sensor is suitable for use in mobile devices due to its low power consumption and small package size.

  9. What are the key features of the TSL26711FN sensor?

    • The key features of the TSL26711FN sensor include high sensitivity, low noise, integrated proximity detection, and programmable interrupt functionality.

  10. Are there any application notes or reference designs available for integrating the TSL26711FN sensor into a technical solution?

    • Yes, application notes and reference designs are available from the manufacturer to assist in integrating the TSL26711FN sensor into various technical solutions.