QD
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
AD5290YRMZ10-R7
Binêre Detail DataSheets

AD5290YRMZ10-R7

Product Overview

Category

AD5290YRMZ10-R7 belongs to the category of electronic components.

Use

AD5290YRMZ10-R7 is commonly used in various electronic devices and circuits for voltage regulation and control.

Characteristics

  • Voltage regulation and control
  • Compact size
  • High precision
  • Low power consumption

Package

AD5290YRMZ10-R7 is available in a small surface-mount package, allowing for easy integration into circuit boards.

Essence

The essence of AD5290YRMZ10-R7 lies in its ability to provide accurate and stable voltage regulation, ensuring optimal performance of electronic systems.

Packaging/Quantity

AD5290YRMZ10-R7 is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of the component. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Model: AD5290YRMZ10-R7
  • Resistance Range: 0Ω to 10kΩ
  • Resolution: 1Ω
  • Temperature Coefficient: ±500ppm/°C
  • Operating Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

AD5290YRMZ10-R7 has the following pin configuration:

  1. VDD: Power supply voltage input
  2. GND: Ground reference
  3. U/D: Up/Down control input
  4. CS: Chip select input
  5. SDO: Serial data output
  6. SDI: Serial data input
  7. SCLK: Serial clock input
  8. RH: Terminal A of the variable resistor
  9. RL: Terminal B of the variable resistor

Functional Features

  • Digital programmability
  • Non-volatile memory for storing settings
  • Up/Down control for adjusting resistance value
  • Serial interface for easy integration with microcontrollers

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Compact size for space-constrained applications
  • Low power consumption for energy efficiency
  • Non-volatile memory for retaining settings even when power is disconnected

Disadvantages

  • Limited resistance range (0Ω to 10kΩ)
  • Temperature coefficient may affect performance in extreme temperature conditions

Working Principles

AD5290YRMZ10-R7 utilizes a digital-to-analog converter (DAC) and a variable resistor network to regulate voltage. The DAC converts the digital control input into an analog voltage, which is then applied across the variable resistor network. By adjusting the resistance value, the desired voltage level can be achieved.

Detailed Application Field Plans

AD5290YRMZ10-R7 finds applications in various fields, including:

  1. Audio equipment: Precise voltage regulation for audio amplifiers and mixers.
  2. Industrial automation: Control voltage levels in industrial machinery and equipment.
  3. Automotive electronics: Voltage regulation in automotive systems and sensors.
  4. Medical devices: Accurate voltage control for medical equipment and instruments.
  5. Consumer electronics: Voltage regulation in smartphones, tablets, and other portable devices.

Detailed and Complete Alternative Models

  1. AD5291YRMZ10-R7: Similar to AD5290YRMZ10-R7 but with extended resistance range (0Ω to 100kΩ).
  2. AD5292YRMZ10-R7: Dual-channel version of AD5290YRMZ10-R7 for simultaneous voltage regulation in two independent circuits.
  3. AD5293YRMZ10-R7: Higher precision variant of AD5290YRMZ10-R7 with lower temperature coefficient.

These alternative models offer similar functionality and characteristics, providing flexibility for different application requirements.

Word count: 534 words

10 pirs û bersivên hevpar ên têkildarî sepana AD5290YRMZ10-R7 di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of AD5290YRMZ10-R7 in technical solutions:

  1. Q: What is the AD5290YRMZ10-R7? A: The AD5290YRMZ10-R7 is a digital potentiometer, specifically a single-channel, non-volatile memory (NVM) device with a resistance range of 10kΩ.

  2. Q: What is the purpose of using the AD5290YRMZ10-R7 in technical solutions? A: The AD5290YRMZ10-R7 can be used to digitally control resistance in various applications such as volume control, gain adjustment, calibration, and sensor trimming.

  3. Q: How does the AD5290YRMZ10-R7 communicate with a microcontroller or other digital devices? A: The AD5290YRMZ10-R7 uses a standard SPI (Serial Peripheral Interface) protocol for communication with external devices.

  4. Q: Can the AD5290YRMZ10-R7 be used in both analog and digital circuits? A: Yes, the AD5290YRMZ10-R7 can be used in both analog and digital circuits, providing a digital interface to control resistance.

  5. Q: Is the resistance value of the AD5290YRMZ10-R7 fixed or adjustable? A: The AD5290YRMZ10-R7 has an adjustable resistance value that can be set digitally through the SPI interface.

  6. Q: Does the AD5290YRMZ10-R7 retain its resistance value after power-off? A: Yes, the AD5290YRMZ10-R7 is a non-volatile memory device, meaning it retains its resistance value even when power is removed.

  7. Q: What is the resolution of the AD5290YRMZ10-R7? A: The AD5290YRMZ10-R7 has a 256-tap resolution, allowing for fine-grained control over resistance levels.

  8. Q: Can multiple AD5290YRMZ10-R7 devices be cascaded together for higher channel count? A: Yes, multiple AD5290YRMZ10-R7 devices can be daisy-chained together to increase the number of available channels.

  9. Q: What is the operating voltage range of the AD5290YRMZ10-R7? A: The AD5290YRMZ10-R7 operates within a voltage range of 2.7V to 5.5V.

  10. Q: Are there any specific precautions or considerations when using the AD5290YRMZ10-R7? A: It is important to ensure that the maximum voltage and current ratings of the AD5290YRMZ10-R7 are not exceeded, and proper decoupling capacitors should be used to minimize noise and stabilize the power supply.

Please note that these answers are general and may vary depending on the specific application and requirements.