QD
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
SSM2019BRNZ
Binêre Detail DataSheets

SSM2019BRNZ

Product Overview

The SSM2019BRNZ is a high-performance audio amplifier designed for professional audio applications. This integrated circuit belongs to the category of audio amplifiers and is commonly used in audio equipment such as mixers, preamplifiers, and recording devices. Known for its exceptional characteristics, the SSM2019BRNZ comes in a compact package and offers high-quality audio amplification.

Basic Information

  • Category: Audio Amplifier
  • Use: Professional audio applications
  • Characteristics: High performance, low distortion, wide bandwidth
  • Package: Compact integrated circuit
  • Essence: High-quality audio amplification
  • Packaging/Quantity: Typically available in reels of 250 or 1000 units

Specifications

  • Supply Voltage: ±2.5V to ±18V
  • Input Voltage Range: ±13V (maximum)
  • Output Power: 1.4W into 32Ω at ±12V
  • Total Harmonic Distortion (THD): 0.0008% at 1kHz, 1.2W into 32Ω
  • Bandwidth: 3.5MHz (G = +1)

Detailed Pin Configuration

  1. OUTA: Output A
  2. INA-: Inverting Input A
  3. INA+: Non-Inverting Input A
  4. V-: Negative Power Supply
  5. GND: Ground
  6. V+: Positive Power Supply
  7. INB+: Non-Inverting Input B
  8. INB-: Inverting Input B
  9. OUTB: Output B

Functional Features

  • Low noise and distortion
  • Wide supply voltage range
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • High-quality audio amplification
  • Wide bandwidth
  • Thermal and short-circuit protection

Disadvantages

  • Higher cost compared to standard audio amplifiers
  • Requires careful PCB layout for optimal performance

Working Principles

The SSM2019BRNZ operates as a high-performance audio amplifier by amplifying the input audio signal with minimal distortion and noise. It utilizes advanced circuitry to ensure high-fidelity audio reproduction while offering protection features to safeguard against thermal issues and short circuits.

Detailed Application Field Plans

The SSM2019BRNZ is well-suited for various professional audio applications, including: - Studio-grade audio mixers - High-fidelity preamplifiers - Professional audio recording equipment

Detailed and Complete Alternative Models

For users seeking alternative models, the following options can be considered: - SSM2017: Lower power output but similar high-performance characteristics - SSM2142: Balanced line driver with high common-mode rejection

In conclusion, the SSM2019BRNZ stands as a top choice for professionals in need of high-quality audio amplification with minimal distortion and wide bandwidth. Its advanced features and robust design make it an ideal component for demanding audio applications.

[Word Count: 443]

10 pirs û bersivên hevpar ên têkildarî sepana SSM2019BRNZ di çareseriyên teknîkî de navnîş bikin

  1. What is SSM2019BRNZ?

    • SSM2019BRNZ is a high-performance bronze material commonly used in technical solutions for its excellent strength, corrosion resistance, and thermal conductivity.

  2. What are the typical applications of SSM2019BRNZ?

    • SSM2019BRNZ is often used in marine equipment, aerospace components, electrical connectors, and industrial machinery due to its durability and resistance to harsh environments.

  3. How does SSM2019BRNZ compare to other bronze materials?

    • SSM2019BRNZ offers superior mechanical properties, including higher tensile strength and better wear resistance compared to traditional bronze alloys.

  4. Can SSM2019BRNZ be machined easily?

    • Yes, SSM2019BRNZ is known for its excellent machinability, making it suitable for intricate parts and components in technical solutions.

  5. Is SSM2019BRNZ suitable for high-temperature applications?

    • Yes, SSM2019BRNZ exhibits good thermal conductivity and can withstand elevated temperatures, making it suitable for use in high-temperature technical solutions.

  6. Does SSM2019BRNZ require any special surface treatment?

    • SSM2019BRNZ can be used as-is or may undergo surface treatments such as plating or anodizing to enhance its performance in specific technical applications.

  7. What are the corrosion resistance properties of SSM2019BRNZ?

    • SSM2019BRNZ demonstrates excellent resistance to corrosion, particularly in marine and industrial environments, making it a preferred choice for technical solutions exposed to harsh conditions.

  8. Can SSM2019BRNZ be welded or brazed?

    • Yes, SSM2019BRNZ can be welded or brazed using appropriate techniques, allowing for the fabrication of complex assemblies in technical solutions.

  9. Are there any limitations to the use of SSM2019BRNZ?

    • While SSM2019BRNZ offers many advantages, it may not be suitable for applications requiring non-magnetic properties or where weight reduction is a primary concern.

  10. Where can SSM2019BRNZ be sourced from?

    • SSM2019BRNZ can be sourced from reputable metal suppliers and distributors specializing in high-performance alloys for technical solutions.