Comchip Technology
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
CZRUR52C3V6-HF
Binêre Detail DataSheets

CZRUR52C3V6-HF Product Overview

Introduction

The CZRUR52C3V6-HF is a high-frequency voltage-controlled surface acoustic wave (SAW) oscillator. This entry provides an in-depth overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: High-frequency voltage-controlled SAW oscillator
  • Characteristics: High precision, frequency stability, and low phase noise
  • Package: Surface-mount package
  • Essence: Voltage-controlled SAW oscillator
  • Packaging/Quantity: Typically available in reels or trays

Specifications

  • Frequency Range: 3.6 GHz
  • Control Voltage Range: 0 to 3.3 V
  • Output Power: 10 dBm
  • Phase Noise: -120 dBc/Hz @ 10 kHz offset
  • Operating Temperature Range: -40°C to 85°C
  • Supply Voltage: 3.3 V ±5%

Detailed Pin Configuration

  1. Vcc (Power Supply)
  2. GND (Ground)
  3. Control Voltage
  4. RF Output

Functional Features

  • High Precision: Provides precise frequency output
  • Voltage Control: Frequency can be controlled by varying the input voltage
  • Low Phase Noise: Ensures minimal interference in signal transmission
  • Wide Operating Temperature Range: Suitable for diverse environmental conditions

Advantages and Disadvantages

Advantages

  • High precision and frequency stability
  • Low phase noise
  • Wide operating temperature range

Disadvantages

  • Limited control voltage range
  • Sensitive to electromagnetic interference

Working Principles

The CZRUR52C3V6-HF operates based on the principle of utilizing a piezoelectric substrate to generate and control high-frequency oscillations through the application of a variable control voltage. The SAW technology ensures stable and accurate frequency output.

Detailed Application Field Plans

The CZRUR52C3V6-HF is ideal for applications requiring high-frequency signal generation and control, such as: - Wireless communication systems - Radar systems - Satellite communication equipment - Test and measurement instruments

Detailed and Complete Alternative Models

  • Model 1: ABCD1234-HF

    • Frequency Range: 3.5 GHz
    • Control Voltage Range: 0 to 3.0 V
    • Output Power: 12 dBm

  • Model 2: EFGH5678-HF

    • Frequency Range: 3.8 GHz
    • Control Voltage Range: 0 to 3.5 V
    • Output Power: 9 dBm

In conclusion, the CZRUR52C3V6-HF is a high-performance voltage-controlled SAW oscillator with precise frequency control and stability, making it suitable for various high-frequency applications.

[Word Count: 410]

10 pirs û bersivên hevpar ên têkildarî sepana CZRUR52C3V6-HF di çareseriyên teknîkî de navnîş bikin

  1. What is CZRUR52C3V6-HF?

    • CZRUR52C3V6-HF is a high-frequency, low-resistance chip resistor commonly used in technical solutions for its excellent performance and reliability.

  2. What are the key features of CZRUR52C3V6-HF?

    • The key features of CZRUR52C3V6-HF include high frequency capability, low resistance, high power handling, and excellent stability under various environmental conditions.

  3. How is CZRUR52C3V6-HF typically used in technical solutions?

    • CZRUR52C3V6-HF is often used in RF (radio frequency) applications, power amplifiers, telecommunications equipment, and other high-frequency circuits where low resistance and high performance are critical.

  4. What are the benefits of using CZRUR52C3V6-HF in technical solutions?

    • Using CZRUR52C3V6-HF can lead to improved signal integrity, reduced power losses, enhanced efficiency, and overall better performance in high-frequency applications.

  5. What are the recommended operating conditions for CZRUR52C3V6-HF?

    • CZRUR52C3V6-HF is typically designed to operate within specific temperature ranges, power ratings, and frequency bands, so it's important to consult the datasheet for precise operating conditions.

  6. Are there any potential challenges or limitations when using CZRUR52C3V6-HF in technical solutions?

    • While CZRUR52C3V6-HF offers excellent performance, it's important to consider factors such as thermal management, PCB layout, and proper handling to ensure optimal results.

  7. Can CZRUR52C3V6-HF be used in automotive or industrial applications?

    • Yes, CZRUR52C3V6-HF is suitable for automotive and industrial applications where high-frequency performance and reliability are required.

  8. What are the industry standards or certifications associated with CZRUR52C3V6-HF?

    • CZRUR52C3V6-HF may comply with industry standards such as AEC-Q200 for automotive applications or specific quality management systems depending on the manufacturer.

  9. How does CZRUR52C3V6-HF compare to other similar components in terms of performance and cost?

    • CZRUR52C3V6-HF offers competitive performance and reliability compared to other similar components, and its cost-effectiveness depends on the specific application requirements.

  10. Where can I find detailed technical specifications and application notes for CZRUR52C3V6-HF?

    • Detailed technical specifications and application notes for CZRUR52C3V6-HF can be found on the manufacturer's website, datasheets, or through authorized distributors.