Diodes Incorporated
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
PI3A125BTAEX
Binêre Detail DataSheets

PI3A125BTAEX

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Switch
  • Characteristics: High-speed, Low-power consumption
  • Package: TSSOP-8
  • Essence: Analog Switch
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Number of Channels: 1
  • Switch Type: SPDT (Single Pole Double Throw)
  • Voltage Supply Range: 1.65V to 5.5V
  • On-Resistance: 0.6Ω (typical)
  • Bandwidth: 500MHz (typical)
  • Propagation Delay: 0.7ns (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PI3A125BTAEX has a total of 8 pins:

  1. Pin 1: VCC (Power Supply)
  2. Pin 2: GND (Ground)
  3. Pin 3: IN (Input Control)
  4. Pin 4: COM (Common Terminal)
  5. Pin 5: NO (Normally Open Terminal)
  6. Pin 6: NC (Normally Closed Terminal)
  7. Pin 7: NC (Not Connected)
  8. Pin 8: VCC (Power Supply)

Functional Features

  • Single-channel analog switch for signal routing applications
  • Low on-resistance and high bandwidth for minimal signal distortion
  • Wide voltage supply range allows compatibility with various systems
  • Fast propagation delay ensures quick switching between signals
  • Low power consumption for energy-efficient operation
  • ESD protection for enhanced reliability

Advantages and Disadvantages

Advantages: - High-speed switching capability - Low power consumption - Wide voltage supply range - ESD protection for improved reliability

Disadvantages: - Limited number of channels (only 1) - Relatively high on-resistance compared to some alternatives

Working Principles

The PI3A125BTAEX is an analog switch that operates based on the control signal applied to the IN pin. When the control signal is high, the switch connects the COM terminal to the NO terminal, allowing the signal to pass through. Conversely, when the control signal is low, the switch connects the COM terminal to the NC terminal, blocking the signal.

Detailed Application Field Plans

The PI3A125BTAEX can be used in various applications, including:

  1. Audio/Video Systems: Signal routing and switching in audio/video receivers, amplifiers, and multimedia devices.
  2. Communication Systems: Signal routing and switching in telecommunication equipment, routers, and network switches.
  3. Test and Measurement Equipment: Signal routing and switching in oscilloscopes, function generators, and data acquisition systems.
  4. Industrial Control Systems: Signal routing and switching in industrial automation, process control, and robotics.

Detailed and Complete Alternative Models

  1. PI3A125BTGEX: Similar specifications and features, but available in a different package (SSOP-8).
  2. PI3A125BTAEY: Similar specifications and features, but with enhanced ESD protection.
  3. PI3A125BTAUX: Similar specifications and features, but with extended temperature range (-40°C to +125°C).

(Note: The above alternative models are provided for reference and may have slight differences in characteristics or packaging.)

Word count: 408 words

10 pirs û bersivên hevpar ên têkildarî sepana PI3A125BTAEX di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of PI3A125BTAEX in technical solutions:

  1. Q: What is PI3A125BTAEX? A: PI3A125BTAEX is a specific model or part number of a component used in technical solutions, typically an integrated circuit (IC) or semiconductor device.

  2. Q: What is the purpose of PI3A125BTAEX? A: PI3A125BTAEX is designed to perform specific functions within a technical solution, such as signal switching, voltage regulation, or data transmission.

  3. Q: What are the key features of PI3A125BTAEX? A: The key features of PI3A125BTAEX may include low power consumption, high-speed operation, multiple input/output channels, compatibility with different voltage levels, and ESD protection.

  4. Q: In which applications can PI3A125BTAEX be used? A: PI3A125BTAEX can be used in various applications, including consumer electronics, telecommunications, automotive systems, industrial automation, and medical devices.

  5. Q: How does PI3A125BTAEX interface with other components in a system? A: PI3A125BTAEX typically interfaces with other components through standard electrical connections, such as soldered pins, surface-mount pads, or connectors.

  6. Q: What are the typical operating conditions for PI3A125BTAEX? A: The typical operating conditions for PI3A125BTAEX may include a specified voltage range, temperature range, and current limits, which should be followed for optimal performance and reliability.

  7. Q: Can PI3A125BTAEX be used in high-speed data transmission applications? A: Yes, PI3A125BTAEX is designed to support high-speed data transmission and can be used in applications that require fast switching or signal routing.

  8. Q: Are there any specific design considerations when using PI3A125BTAEX? A: Yes, it is important to consider factors such as signal integrity, power supply noise, board layout, and thermal management to ensure proper functioning of PI3A125BTAEX in a system.

  9. Q: Can PI3A125BTAEX be used in both digital and analog circuits? A: Yes, PI3A125BTAEX can be used in both digital and analog circuits, depending on the specific requirements of the application.

  10. Q: Where can I find more information about PI3A125BTAEX? A: You can find more detailed information about PI3A125BTAEX in its datasheet, which is typically available on the manufacturer's website or through authorized distributors.