Diodes Incorporated
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
ZXCT1087QE5TA
Binêre Detail DataSheets

ZXCT1087QE5TA

Overview

  • Category: Integrated Circuit (IC)
  • Use: Current Shunt Monitor
  • Characteristics: High accuracy, low power consumption
  • Package: SOT23-5
  • Essence: Monitors current flowing through a shunt resistor
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Supply Voltage: 2.7V to 40V
  • Input Common Mode Voltage Range: -0.3V to VCC+0.3V
  • Output Voltage Range: 0V to VCC
  • Quiescent Current: 60µA (typical)
  • Gain Accuracy: ±1% (maximum)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The ZXCT1087QE5TA has a total of 5 pins:

  1. VCC: Supply voltage pin
  2. GND: Ground pin
  3. IN+: Positive input pin for the current shunt resistor
  4. IN-: Negative input pin for the current shunt resistor
  5. OUT: Output pin for the amplified voltage across the shunt resistor

Functional Features

  • High accuracy current monitoring
  • Low power consumption
  • Wide supply voltage range
  • Rail-to-rail output voltage swing
  • Internal reference voltage
  • Short-circuit protection

Advantages

  • Accurate measurement of current flow
  • Low power consumption extends battery life
  • Wide supply voltage range allows for versatile applications
  • Rail-to-rail output voltage swing provides maximum signal range
  • Internal reference voltage simplifies circuit design
  • Short-circuit protection prevents damage to the IC

Disadvantages

  • Limited to current monitoring applications
  • Requires an external shunt resistor for operation

Working Principles

The ZXCT1087QE5TA operates by measuring the voltage drop across an external shunt resistor. The amplified voltage is then outputted, allowing for accurate current monitoring. The internal reference voltage ensures precise measurements, while the short-circuit protection prevents damage to the IC in case of a fault.

Detailed Application Field Plans

The ZXCT1087QE5TA is commonly used in various applications, including:

  1. Battery management systems
  2. Power supplies and converters
  3. Motor control systems
  4. Solar power systems
  5. Automotive electronics

Detailed and Complete Alternative Models

  • ZXCT1087QE6TA: Similar specifications, but with ±0.5% gain accuracy
  • ZXCT1087QE7TA: Similar specifications, but with ±0.25% gain accuracy
  • ZXCT1087QE8TA: Similar specifications, but with ±0.1% gain accuracy

These alternative models provide different levels of gain accuracy to suit specific application requirements.

Word count: 314 words

10 pirs û bersivên hevpar ên têkildarî sepana ZXCT1087QE5TA di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of ZXCT1087QE5TA in technical solutions:

  1. Question: What is ZXCT1087QE5TA?
    Answer: ZXCT1087QE5TA is a high-side current sense amplifier designed for monitoring current in power management applications.

  2. Question: What is the operating voltage range of ZXCT1087QE5TA?
    Answer: The operating voltage range of ZXCT1087QE5TA is from 2.7V to 28V.

  3. Question: What is the maximum input offset voltage of ZXCT1087QE5TA?
    Answer: The maximum input offset voltage of ZXCT1087QE5TA is typically 500µV.

  4. Question: Can ZXCT1087QE5TA measure both AC and DC currents?
    Answer: Yes, ZXCT1087QE5TA can measure both AC and DC currents.

  5. Question: What is the gain accuracy of ZXCT1087QE5TA?
    Answer: The gain accuracy of ZXCT1087QE5TA is typically ±1%.

  6. Question: Does ZXCT1087QE5TA have built-in overcurrent protection?
    Answer: No, ZXCT1087QE5TA does not have built-in overcurrent protection. External circuitry may be required for overcurrent protection.

  7. Question: What is the bandwidth of ZXCT1087QE5TA?
    Answer: The bandwidth of ZXCT1087QE5TA is typically 1MHz.

  8. Question: Can ZXCT1087QE5TA operate in harsh environments?
    Answer: Yes, ZXCT1087QE5TA is designed to operate in harsh environments with a temperature range of -40°C to +125°C.

  9. Question: What is the package type of ZXCT1087QE5TA?
    Answer: ZXCT1087QE5TA is available in a SOT23-5 package.

  10. Question: Can ZXCT1087QE5TA be used in battery monitoring applications?
    Answer: Yes, ZXCT1087QE5TA can be used in battery monitoring applications to measure current consumption or charging/discharging currents.

Please note that these answers are general and may vary depending on specific application requirements.