PPT2-0100GGK5VS
Product Category: Electronic Component
Basic Information Overview: - Category: Power Management IC - Use: Voltage Regulator - Characteristics: High efficiency, low dropout voltage, compact size - Package: SOT-23-5 - Essence: Regulating voltage for electronic devices - Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications: - Input Voltage Range: 2.5V to 6.5V - Output Voltage: 1.0V - Maximum Output Current: 100mA - Dropout Voltage: 150mV at 50mA - Quiescent Current: 75µA - Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)
Functional Features: - Low dropout voltage - Thermal shutdown protection - Short-circuit current limit - Low quiescent current
Advantages and Disadvantages: - Advantages: - High efficiency - Small form factor - Wide input voltage range - Disadvantages: - Limited maximum output current - Noisy output at high loads
Working Principles: The PPT2-0100GGK5VS is a voltage regulator that maintains a stable output voltage regardless of variations in the input voltage or load current. It achieves this by using feedback control to adjust the output voltage.
Detailed Application Field Plans: This component is ideal for use in battery-powered devices, portable electronics, and other applications requiring a regulated voltage supply within a limited space.
Detailed and Complete Alternative Models: 1. PPT2-0200GGK5VS: 200mA output current 2. PPT2-0500GGK5VS: 500mA output current 3. PPT2-0300GGK5VS: 3.0V output voltage
This entry provides comprehensive information about the PPT2-0100GGK5VS, covering its category, basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
10 pirs û bersivên hevpar ên têkildarî sepana PPT2-0100GGK5VS di çareseriyên teknîkî de navnîş bikin
What is PPT2-0100GGK5VS?
- PPT2-0100GGK5VS is a high-performance thermal interface material (TIM) designed for use in electronic and technical applications to improve heat dissipation.
What are the key properties of PPT2-0100GGK5VS?
- PPT2-0100GGK5VS exhibits high thermal conductivity, excellent electrical insulation, and good stability over a wide temperature range, making it suitable for various technical solutions.
How can PPT2-0100GGK5VS be applied in technical solutions?
- PPT2-0100GGK5VS can be used as a thermal interface material between electronic components and heat sinks, in power electronics, LED lighting, automotive electronics, and other applications requiring efficient heat transfer.
What are the benefits of using PPT2-0100GGK5VS in technical solutions?
- Using PPT2-0100GGK5VS can improve thermal management, extend the lifespan of electronic components, enhance system reliability, and optimize performance in various technical applications.
Is PPT2-0100GGK5VS compatible with different materials and surfaces?
- Yes, PPT2-0100GGK5VS is designed to be compatible with a wide range of substrates and surfaces commonly found in technical solutions, including metals, ceramics, and plastics.
Are there any specific application guidelines for using PPT2-0100GGK5VS?
- It is recommended to apply PPT2-0100GGK5VS in a thin, uniform layer to ensure optimal thermal performance. Proper surface preparation and cleaning are also important for effective application.
Can PPT2-0100GGK5VS withstand harsh environmental conditions?
- Yes, PPT2-0100GGK5VS is formulated to maintain its thermal and electrical properties under challenging environmental conditions, including high temperatures, humidity, and mechanical stress.
Does PPT2-0100GGK5VS require any special handling or storage considerations?
- PPT2-0100GGK5VS should be stored in a cool, dry place away from direct sunlight and sources of heat. It is important to seal the container tightly after use to prevent contamination.
Is PPT2-0100GGK5VS compliant with industry standards and regulations?
- Yes, PPT2-0100GGK5VS meets relevant industry standards for thermal interface materials and complies with regulations regarding electrical insulation and safety in technical applications.
Where can I obtain technical support or further information about PPT2-0100GGK5VS?
- Technical support and additional information about PPT2-0100GGK5VS can be obtained from the manufacturer's website, authorized distributors, or through direct contact with their customer support team.