Honeywell Sensing and Productivity Solutions
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
MLH050PGB13A
Binêre Detail DataSheets

MLH050PGB13A

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High efficiency, compact design
  • Package: 16-pin SSOP
  • Essence: Regulates power supply
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 0.8V to 5.5V
  • Output Current: 5A
  • Switching Frequency: 300kHz to 2.2MHz
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. PGND (Power Ground)
  3. SW (Switch Node)
  4. FB (Feedback)
  5. COMP (Compensation)
  6. SS/TRK (Soft Start/Tracking)
  7. EN (Enable)
  8. VCC (Internal Bias Voltage)
  9. AGND (Analog Ground)
  10. BOOT (Bootstrap)
  11. PH (Phase)
  12. LGATE (Low Side Gate Driver)
  13. PGND (Power Ground)
  14. BST (Bootstrap)
  15. UGATE (Upper Gate Driver)
  16. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown
  • Soft start and tracking

Advantages and Disadvantages

Advantages: - High efficiency - Compact design - Comprehensive protection features

Disadvantages: - Higher cost compared to traditional regulators - Requires careful PCB layout for optimal performance

Working Principles

The MLH050PGB13A is a synchronous step-down DC-DC converter that regulates the input voltage to a lower, stable output voltage. It uses a high-frequency switching regulator to achieve high efficiency and compact size.

Detailed Application Field Plans

This IC is suitable for various applications requiring efficient power management, such as: - Portable electronic devices - Industrial automation systems - Automotive electronics - Telecommunication equipment

Detailed and Complete Alternative Models

  1. MLH040PGB12B
    • Similar specifications and pin configuration
    • Lower output current (3A)
  2. MLH060PGB14C
    • Higher output current (8A)
    • Different package (QFN)

In conclusion, the MLH050PGB13A is a versatile power management IC with a wide range of applications, offering high efficiency and comprehensive protection features.

Word count: 324

10 pirs û bersivên hevpar ên têkildarî sepana MLH050PGB13A di çareseriyên teknîkî de navnîş bikin

  1. What is MLH050PGB13A?

    • MLH050PGB13A is a specific model of pressure sensor designed for use in technical solutions, particularly in industrial and automotive applications.

  2. What are the key features of MLH050PGB13A?

    • The key features of MLH050PGB13A include high accuracy, wide operating temperature range, small form factor, and compatibility with various media types.

  3. How is MLH050PGB13A typically used in industrial applications?

    • In industrial applications, MLH050PGB13A is commonly used for monitoring and controlling pressure in hydraulic systems, pneumatic systems, and process control equipment.

  4. Can MLH050PGB13A be integrated into automotive systems?

    • Yes, MLH050PGB13A can be integrated into automotive systems for applications such as tire pressure monitoring, fuel system pressure monitoring, and engine management.

  5. What are the electrical specifications of MLH050PGB13A?

    • The electrical specifications of MLH050PGB13A include a wide supply voltage range, low power consumption, and various output options such as analog voltage or digital signals.

  6. Is MLH050PGB13A suitable for harsh environments?

    • Yes, MLH050PGB13A is designed to withstand harsh environmental conditions, including exposure to moisture, vibration, and extreme temperatures.

  7. Are there any calibration requirements for MLH050PGB13A?

    • MLH050PGB13A may require initial calibration to ensure accurate pressure measurements, and periodic recalibration may be necessary depending on the application and environmental factors.

  8. What is the typical response time of MLH050PGB13A?

    • The typical response time of MLH050PGB13A is fast, allowing for real-time monitoring and control of pressure changes in dynamic systems.

  9. Can MLH050PGB13A be used in conjunction with microcontrollers or PLCs?

    • Yes, MLH050PGB13A can be easily interfaced with microcontrollers, PLCs, and other control systems using standard communication protocols such as I2C, SPI, or analog interfaces.

  10. Where can I find technical documentation and support for MLH050PGB13A?

    • Technical documentation and support for MLH050PGB13A can be obtained from the manufacturer's website, including datasheets, application notes, and access to technical support resources.