IDT, Integrated Device Technology Inc
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
74FCT16374ETPAG
Binêre Detail DataSheets

Encyclopedia Entry: 74FCT16374ETPAG

Product Overview

Category

The 74FCT16374ETPAG belongs to the category of integrated circuits (ICs) and specifically falls under the family of flip-flops.

Use

This product is primarily used for storing digital information in electronic systems. It can be employed in various applications where sequential data storage and transfer are required.

Characteristics

  • The 74FCT16374ETPAG is a 16-bit D-type flip-flop with 3-state outputs.
  • It operates on a wide voltage range, typically between 4.5V and 5.5V.
  • This IC offers high-speed performance, making it suitable for applications demanding quick data processing.
  • It features a latch-up protection mechanism to prevent damage during power surges or fluctuations.

Package and Quantity

The 74FCT16374ETPAG is available in a TSSOP (Thin Shrink Small Outline Package) package. Each package contains one unit of the IC.

Essence

The essence of the 74FCT16374ETPAG lies in its ability to store and transfer digital data reliably and efficiently within electronic systems.

Packaging/Quantity

The 74FCT16374ETPAG is typically sold in reels or tubes, with each reel/tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Number of Flip-Flops: 16
  • Logic Family: FCT
  • Output Type: 3-State
  • Supply Voltage Range: 4.5V - 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Compatibility: TTL, CMOS

Detailed Pin Configuration

The 74FCT16374ETPAG has a total of 48 pins, which are assigned specific functions. The pin configuration is as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: Data Input (D0)
  3. Pin 3: Data Input (D1)
  4. Pin 4: Data Input (D2)
  5. Pin 5: Data Input (D3)
  6. Pin 6: Data Input (D4)
  7. Pin 7: Data Input (D5)
  8. Pin 8: Data Input (D6)
  9. Pin 9: Data Input (D7)
  10. Pin 10: Data Input (D8)
  11. Pin 11: Data Input (D9)
  12. Pin 12: Data Input (D10)
  13. Pin 13: Data Input (D11)
  14. Pin 14: Data Input (D12)
  15. Pin 15: Data Input (D13)
  16. Pin 16: Data Input (D14)
  17. Pin 17: Data Input (D15)
  18. Pin 18: Clock (CLK)
  19. Pin 19: Clock Enable (CE)
  20. Pin 20: Master Reset (MR)
  21. Pin 21: Output Q0
  22. Pin 22: Output Q1
  23. Pin 23: Output Q2
  24. Pin 24: Output Q3
  25. Pin 25: Output Q4
  26. Pin 26: Output Q5
  27. Pin 27: Output Q6
  28. Pin 28: Output Q7
  29. Pin 29: Output Q8
  30. Pin 30: Output Q9
  31. Pin 31: Output Q10
  32. Pin 32: Output Q11
  33. Pin 33: Output Q12
  34. Pin 34: Output Q13
  35. Pin 35: Output Q14
  36. Pin 36: Output Q15
  37. Pin 37: Ground (GND)
  38. Pin 38: Ground (GND)
  39. Pin 39: Ground (GND)
  40. Pin 40: Ground (GND)
  41. Pin 41: VCC
  42. Pin 42: VCC
  43. Pin 43: VCC
  44. Pin 44: VCC
  45. Pin 45: Data Output Enable (DOE)
  46. Pin 46: Data Output (DO0)
  47. Pin 47: Data Output (DO1)
  48. Pin 48: Data Output (DO2)

Functional Features

  • The 74FCT16374ETPAG can store and transfer 16 bits of digital data.
  • It supports 3-state outputs, allowing multiple devices to share a common bus without interference.
  • The IC features clock enable (CE) and master reset (MR) inputs for enhanced control over the data storage and transfer operations.
  • It offers

10 pirs û bersivên hevpar ên têkildarî sepana 74FCT16374ETPAG di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of 74FCT16374ETPAG in technical solutions:

  1. Q: What is the 74FCT16374ETPAG? A: The 74FCT16374ETPAG is a 16-bit D-type flip-flop with 3-state outputs, commonly used in digital circuits.

  2. Q: What is the purpose of the 74FCT16374ETPAG? A: The purpose of this component is to store and transfer data in digital systems, providing synchronization and control.

  3. Q: What voltage levels does the 74FCT16374ETPAG support? A: The 74FCT16374ETPAG supports both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) voltage levels.

  4. Q: How many flip-flops are there in the 74FCT16374ETPAG? A: The 74FCT16374ETPAG consists of 16 individual D-type flip-flops, each capable of storing one bit of data.

  5. Q: What is the maximum clock frequency supported by the 74FCT16374ETPAG? A: The maximum clock frequency supported by this component is typically specified by the manufacturer and can vary, but it is usually in the range of tens or hundreds of megahertz.

  6. Q: Can the 74FCT16374ETPAG be cascaded to increase the number of flip-flops? A: Yes, multiple 74FCT16374ETPAG components can be cascaded together to increase the number of flip-flops and create larger registers or memory banks.

  7. Q: What are the 3-state outputs in the 74FCT16374ETPAG used for? A: The 3-state outputs allow the flip-flop outputs to be either actively driven (high or low) or effectively disconnected from the circuit, enabling bus sharing and reducing contention.

  8. Q: What is the power supply voltage range for the 74FCT16374ETPAG? A: The power supply voltage range for this component typically falls within the range of 4.5V to 5.5V.

  9. Q: Can the 74FCT16374ETPAG operate in both synchronous and asynchronous modes? A: Yes, the 74FCT16374ETPAG can operate in both synchronous mode, where the outputs change only on clock edges, and asynchronous mode, where the outputs can change asynchronously.

  10. Q: Are there any specific precautions to consider when using the 74FCT16374ETPAG? A: It is important to follow the manufacturer's datasheet and guidelines for proper power supply decoupling, signal integrity, and handling of input/output voltages to ensure reliable operation of the component.

Please note that the answers provided here are general and may vary depending on the specific implementation and datasheet of the 74FCT16374ETPAG.