840N051BGILFT
Overview
- Category: Electronic Component
- Use: Integrated Circuit
- Characteristics: High-performance, low-power consumption
- Package: Surface Mount Technology (SMT)
- Essence: Microcontroller
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications and Parameters
- Operating Voltage: 3.3V
- Clock Frequency: 100 MHz
- Flash Memory: 512 KB
- RAM: 64 KB
- GPIO Pins: 32
- ADC Channels: 8
- UART Ports: 2
- I2C Interfaces: 1
- SPI Interfaces: 2
Pin Configuration
The pin configuration of 840N051BGILFT is as follows:
- VDD
- GND
- GPIO0
- GPIO1
- GPIO2
- GPIO3
- GPIO4
- GPIO5
- GPIO6
- GPIO7
- GPIO8
- GPIO9
- GPIO10
- GPIO11
- GPIO12
- GPIO13
- GPIO14
- GPIO15
- GPIO16
- GPIO17
- GPIO18
- GPIO19
- GPIO20
- GPIO21
- GPIO22
- GPIO23
- GPIO24
- GPIO25
- GPIO26
- GPIO27
- GPIO28
- GPIO29
Functional Characteristics
- High-speed processing capabilities
- Low-power consumption for energy efficiency
- Support for various communication protocols
- Rich input/output options for versatile applications
- Built-in flash memory for program storage
- Real-time clock for timekeeping functionality
Advantages and Disadvantages
Advantages: - High-performance microcontroller - Low-power consumption for extended battery life - Versatile input/output options - Ample program storage capacity
Disadvantages: - Limited number of ADC channels - Relatively high cost compared to similar models
Applicable Range of Products
The 840N051BGILFT is suitable for a wide range of applications, including but not limited to: - Internet of Things (IoT) devices - Home automation systems - Industrial control systems - Wearable technology - Consumer electronics
Working Principles
The 840N051BGILFT operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its flash memory to perform various tasks, such as data processing, communication, and control.
Detailed Application Field Plans
- IoT Sensor Node: The microcontroller can be used to collect sensor data and transmit it wirelessly to a central hub for further analysis and decision-making.
- Smart Home Controller: With its versatile input/output options, the microcontroller can interface with various home automation devices, allowing users to control and monitor their smart homes.
- Industrial Automation: The microcontroller's high-speed processing capabilities make it suitable for controlling and monitoring industrial processes, improving efficiency and productivity.
- Fitness Tracker: By integrating sensors and wireless communication, the microcontroller can be used in wearable fitness devices to track and analyze user activity.
- Gaming Console: The microcontroller's performance and input/output options make it suitable for developing gaming consoles with immersive gameplay experiences.
Detailed Alternative Models
- 840N052BGILFT: Similar to 840N051BGILFT but with increased flash memory capacity.
- 840N053BGILFT: Similar to 840N051BGILFT but with additional UART ports.
- 840N054BGILFT: Similar to 840N051BGILFT but with increased GPIO pins.
- 840N055BGILFT: Similar to 840N051BGILFT but with higher clock frequency.
- 840N056BGILFT: Similar to 840N051BGILFT but with additional I2C interfaces.
5 Common Technical Questions and Answers
Q: What is the maximum operating voltage of 840N051BGILFT? A: The maximum operating voltage is 3.3V.
Q: How much flash memory does the microcontroller have? A: The microcontroller has 512 KB of flash memory.
Q: Can I use the microcontroller for wireless communication? A: Yes, the microcontroller supports various communication protocols, including wireless options like Wi-Fi and Bluetooth.
Q: How many ADC channels are available on the microcontroller? A: The microcontroller has 8 ADC channels.
Q: Is the microcontroller suitable for battery-powered devices? A: Yes, the microcontroller's low-power consumption makes it ideal for battery-powered applications.
[Word Count: