BTS52004EKAXUMA1
Product Overview
- Category: Electronic Component
- Use: Power Switch
- Characteristics: High current handling capability, low on-resistance, overtemperature protection
- Package: TO-263-7 (D2PAK)
- Essence: This product is a power switch designed for various applications requiring high current handling capability and low on-resistance.
- Packaging/Quantity: Available in tape and reel packaging, with 250 units per reel.
Specifications
- Voltage Rating: 40V
- Current Rating: 50A
- On-Resistance: 4.5mΩ
- Operating Temperature Range: -40°C to +150°C
- Overtemperature Protection Threshold: 175°C
Detailed Pin Configuration
The BTS52004EKAXUMA1 has the following pin configuration:
- GND (Ground)
- IN (Input)
- EN (Enable)
- OUT (Output)
- Vbb (Bootstrap Voltage)
- VS (Supply Voltage)
- PGND (Power Ground)
Functional Features
- High current handling capability allows it to handle heavy loads efficiently.
- Low on-resistance minimizes power losses and improves overall system efficiency.
- Overtemperature protection ensures safe operation by shutting down the device when the temperature exceeds a certain threshold.
Advantages and Disadvantages
Advantages: - High current handling capability - Low on-resistance - Overtemperature protection for enhanced safety
Disadvantages: - Limited voltage rating of 40V - Relatively high on-resistance compared to some alternative models
Working Principles
The BTS52004EKAXUMA1 operates as a power switch by controlling the flow of current between the input and output terminals. When the enable pin (EN) is activated, the device allows current to flow from the input (IN) to the output (OUT). The low on-resistance ensures minimal voltage drop across the switch, resulting in efficient power transfer.
Detailed Application Field Plans
The BTS52004EKAXUMA1 is commonly used in various applications that require high current switching capabilities, such as:
- Automotive systems: Power distribution modules, electric power steering, motor control units.
- Industrial equipment: Motor drives, solenoid control, power supplies.
- Consumer electronics: Audio amplifiers, LED lighting control, battery charging circuits.
Detailed and Complete Alternative Models
- BTS50085-1TMA: Similar power switch with a higher voltage rating of 60V.
- BTS6144D: Power switch with integrated diagnostic features for enhanced fault detection.
- BTS555: Power switch with lower on-resistance for improved efficiency.
Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's datasheets for a complete list of alternatives.
Word count: 324 words
10 pirs û bersivên hevpar ên têkildarî sepana BTS52004EKAXUMA1 di çareseriyên teknîkî de navnîş bikin
Sure! Here are 10 common questions and answers related to the application of BTS52004EKAXUMA1 in technical solutions:
Q1: What is BTS52004EKAXUMA1? A1: BTS52004EKAXUMA1 is a specific model of power switch used in various technical solutions.
Q2: What is the maximum voltage rating of BTS52004EKAXUMA1? A2: The maximum voltage rating of BTS52004EKAXUMA1 is typically around 40V.
Q3: What is the maximum current rating of BTS52004EKAXUMA1? A3: The maximum current rating of BTS52004EKAXUMA1 is usually around 4A.
Q4: What are the typical applications of BTS52004EKAXUMA1? A4: BTS52004EKAXUMA1 is commonly used in automotive, industrial, and consumer electronics applications for power management and control.
Q5: Does BTS52004EKAXUMA1 have built-in protection features? A5: Yes, BTS52004EKAXUMA1 typically includes built-in protection features such as overcurrent, overvoltage, and thermal shutdown protection.
Q6: Can BTS52004EKAXUMA1 be used for high-side or low-side switching? A6: BTS52004EKAXUMA1 can be used for both high-side and low-side switching, depending on the specific application requirements.
Q7: What is the operating temperature range of BTS52004EKAXUMA1? A7: The operating temperature range of BTS52004EKAXUMA1 is typically between -40°C to +150°C.
Q8: Is BTS52004EKAXUMA1 compatible with microcontrollers or other digital control systems? A8: Yes, BTS52004EKAXUMA1 can be easily controlled by microcontrollers or other digital control systems through its input pins.
Q9: Can multiple BTS52004EKAXUMA1 devices be used in parallel for higher current handling? A9: Yes, multiple BTS52004EKAXUMA1 devices can be connected in parallel to increase the overall current handling capability.
Q10: Are there any specific layout considerations when using BTS52004EKAXUMA1? A10: It is recommended to follow the manufacturer's guidelines for PCB layout and thermal management to ensure optimal performance and reliability of BTS52004EKAXUMA1.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of BTS52004EKAXUMA1.