IHW40N120R3FKSA1
Product Overview
Category
The IHW40N120R3FKSA1 belongs to the category of power semiconductor devices.
Use
It is used for high-power applications such as motor drives, inverters, and power supplies.
Characteristics
- High voltage and current handling capability
- Low on-state voltage drop
- Fast switching speed
- Robust and reliable performance
Package
The IHW40N120R3FKSA1 is available in a TO-247 package.
Essence
This product is essential for efficient power management in high-power electronic systems.
Packaging/Quantity
The IHW40N120R3FKSA1 is typically packaged in reels or tubes and is available in varying quantities based on customer requirements.
Specifications
- Voltage Rating: 1200V
- Current Rating: 40A
- Package Type: TO-247
- Switching Speed: <100ns
- On-State Voltage Drop: <2V at 40A
Detailed Pin Configuration
The IHW40N120R3FKSA1 has a standard TO-247 pin configuration with three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High voltage blocking capability
- Low conduction losses
- Fast and efficient switching
- Robust thermal performance
Advantages
- High power handling capacity
- Low on-state voltage drop leading to reduced power dissipation
- Fast switching speed for improved efficiency
- Reliable and durable construction
Disadvantages
- Higher cost compared to lower-rated devices
- Requires careful thermal management due to high power dissipation
Working Principles
The IHW40N120R3FKSA1 operates based on the principles of field-effect transistors, utilizing its high voltage blocking and fast switching capabilities to control power flow in electronic circuits.
Detailed Application Field Plans
The IHW40N120R3FKSA1 is ideally suited for use in: - Industrial motor drives - Power inverters for renewable energy systems - High-power switched-mode power supplies - Electric vehicle powertrains
Detailed and Complete Alternative Models
Some alternative models to the IHW40N120R3FKSA1 include: - IRFP4668PBF - STGW40NC120KD - FGA40N65SMD
In conclusion, the IHW40N120R3FKSA1 is a high-performance power semiconductor device designed for demanding high-power applications, offering efficient power management and reliable operation.
[Word count: 345]
10 pirs û bersivên hevpar ên têkildarî sepana IHW40N120R3FKSA1 di çareseriyên teknîkî de navnîş bikin
What is the maximum voltage rating of IHW40N120R3FKSA1?
- The maximum voltage rating of IHW40N120R3FKSA1 is 1200V.
What is the maximum current rating of IHW40N120R3FKSA1?
- The maximum current rating of IHW40N120R3FKSA1 is 40A.
What type of package does IHW40N120R3FKSA1 come in?
- IHW40N120R3FKSA1 comes in a TO-247 package.
What are the typical applications for IHW40N120R3FKSA1?
- IHW40N120R3FKSA1 is commonly used in applications such as motor drives, inverters, and power supplies.
What is the on-state voltage drop of IHW40N120R3FKSA1?
- The on-state voltage drop of IHW40N120R3FKSA1 is typically around 1.8V.
Does IHW40N120R3FKSA1 have built-in protection features?
- Yes, IHW40N120R3FKSA1 has built-in features such as overcurrent protection and thermal shutdown.
What is the switching frequency range for IHW40N120R3FKSA1?
- The switching frequency range for IHW40N120R3FKSA1 is typically between 10kHz and 100kHz.
Is IHW40N120R3FKSA1 suitable for high-temperature environments?
- Yes, IHW40N120R3FKSA1 is designed to operate reliably in high-temperature environments.
What are the recommended gate drive voltage and current for IHW40N120R3FKSA1?
- The recommended gate drive voltage for IHW40N120R3FKSA1 is 15V, and the gate drive current is typically around 2A.
Are there any specific layout considerations when using IHW40N120R3FKSA1 in a circuit?
- It is important to pay attention to proper heat sinking and minimize parasitic inductance in the layout when using IHW40N120R3FKSA1 in a circuit.