Intel FPGAs/Altera
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
EPM7128BFI100-7
Binêre Detail DataSheets

EPM7128BFI100-7

Product Overview

Category

The EPM7128BFI100-7 belongs to the category of programmable logic devices (PLDs).

Use

This device is commonly used in electronic circuits for implementing digital logic functions. It provides a flexible and customizable solution for various applications.

Characteristics

  • Programmable: The EPM7128BFI100-7 can be programmed to perform specific logic functions.
  • High Integration: It offers a high level of integration, allowing multiple logic functions to be implemented within a single device.
  • Versatile: This PLD supports a wide range of applications due to its programmability.
  • Fast Operation: The EPM7128BFI100-7 operates at high speeds, enabling efficient execution of complex logic operations.

Package

The EPM7128BFI100-7 is available in a 100-pin FineLine BGA package.

Essence

The essence of this product lies in its ability to provide a reconfigurable logic solution, eliminating the need for custom-designed integrated circuits for specific applications.

Packaging/Quantity

The EPM7128BFI100-7 is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • Device Type: Complex Programmable Logic Device (CPLD)
  • Number of Macrocells: 128
  • Maximum Operating Frequency: 100 MHz
  • Supply Voltage: 3.3V
  • I/O Pins: 84
  • Operating Temperature Range: -40°C to +85°C
  • Programming Technology: In-System Programmable (ISP)

Detailed Pin Configuration

The EPM7128BFI100-7 has a total of 100 pins. The pin configuration is as follows:

(Pin diagram goes here)

Functional Features

  • Flexible Logic Implementation: The EPM7128BFI100-7 allows users to implement a wide range of logic functions, including combinatorial and sequential circuits.
  • In-System Programmability: This PLD can be programmed while in operation, eliminating the need for physical replacement or reconfiguration.
  • High-Speed Operation: The EPM7128BFI100-7 operates at a high frequency, enabling rapid execution of complex logic operations.
  • Low Power Consumption: This device is designed to minimize power consumption, making it suitable for battery-powered applications.

Advantages and Disadvantages

Advantages

  • Versatile and customizable solution for various digital logic applications.
  • Eliminates the need for custom-designed integrated circuits, reducing development time and cost.
  • In-System Programmability allows for easy updates and modifications.
  • High integration enables compact circuit designs.

Disadvantages

  • Limited number of macrocells compared to larger CPLDs.
  • May require additional support components for certain applications.
  • Higher cost compared to simpler logic devices.

Working Principles

The EPM7128BFI100-7 utilizes programmable logic elements, such as lookup tables and flip-flops, to implement user-defined logic functions. These elements are interconnected through configurable routing resources, allowing the creation of complex digital circuits. The device is programmed using specialized software that generates a configuration file, which is then loaded into the PLD.

Detailed Application Field Plans

The EPM7128BFI100-7 finds applications in various fields, including: - Industrial Automation: Used for control systems, monitoring equipment, and data acquisition. - Telecommunications: Employed in network routers, switches, and communication protocols. - Consumer Electronics: Integrated into multimedia devices, gaming consoles, and home automation systems. - Automotive: Utilized in engine control units, infotainment systems, and driver assistance modules.

Detailed and Complete Alternative Models

  • EPM7064SLC44-10: A similar CPLD with 64 macrocells and a 44-pin PLCC package.
  • EPM7256AETC144-7: A larger CPLD with 256 macrocells and a 144-pin TQFP package.
  • XC9572XL-10VQG44C: An alternative FPGA with 72 macrocells and a 44-pin VQFP package.

(Note: The above alternative models are provided for reference purposes and may vary in specifications and availability.)

In conclusion, the EPM7128BFI100-7 is a versatile programmable logic device that offers a flexible solution for implementing digital logic functions. Its high integration, fast operation, and in-system programmability make it suitable for a wide range of applications across various industries.

10 pirs û bersivên hevpar ên têkildarî sepana EPM7128BFI100-7 di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of EPM7128BFI100-7 in technical solutions:

  1. Q: What is EPM7128BFI100-7? A: EPM7128BFI100-7 is a specific model of programmable logic device (PLD) manufactured by Intel.

  2. Q: What is the purpose of EPM7128BFI100-7 in technical solutions? A: EPM7128BFI100-7 is used for implementing digital logic functions, such as data processing, control, and interfacing, in various electronic systems.

  3. Q: What are the key features of EPM7128BFI100-7? A: Some key features include 128 macrocells, 7.5 ns maximum propagation delay, 100 MHz maximum operating frequency, and 100-pin FineLine BGA package.

  4. Q: How can EPM7128BFI100-7 be programmed? A: EPM7128BFI100-7 can be programmed using industry-standard hardware description languages (HDLs) like VHDL or Verilog, and then configured using programming tools provided by Intel.

  5. Q: What are the typical applications of EPM7128BFI100-7? A: EPM7128BFI100-7 is commonly used in applications like telecommunications, industrial automation, automotive electronics, medical devices, and consumer electronics.

  6. Q: Can EPM7128BFI100-7 be reprogrammed after initial configuration? A: No, EPM7128BFI100-7 is a one-time programmable (OTP) device, meaning it cannot be reprogrammed once it has been configured.

  7. Q: What is the power supply requirement for EPM7128BFI100-7? A: EPM7128BFI100-7 requires a single 3.3V power supply for normal operation.

  8. Q: Does EPM7128BFI100-7 support external memory interfaces? A: No, EPM7128BFI100-7 does not have built-in support for external memory interfaces. It is primarily designed for implementing logic functions.

  9. Q: Can EPM7128BFI100-7 be used in high-reliability applications? A: Yes, EPM7128BFI100-7 is suitable for high-reliability applications as it is manufactured using reliable and robust semiconductor technology.

  10. Q: Are there any limitations or considerations when using EPM7128BFI100-7? A: Some considerations include the limited number of macrocells, the one-time programmable nature, and the need for proper programming tools and expertise to configure the device accurately.