Intersil
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
HIP2100IBT
Binêre Detail DataSheets

HIP2100IBT

Product Overview

Category

HIP2100IBT belongs to the category of integrated circuits (ICs).

Use

The HIP2100IBT is primarily used as a high-frequency, half-bridge gate driver IC.

Characteristics

  • High-frequency operation
  • Half-bridge configuration
  • Gate driver functionality
  • Integrated protection features

Package

The HIP2100IBT is available in a compact and industry-standard SOIC-8 package.

Essence

The essence of HIP2100IBT lies in its ability to efficiently drive high-frequency half-bridge configurations, enabling precise control over power electronics systems.

Packaging/Quantity

The HIP2100IBT is typically packaged in reels containing 2500 units per reel.

Specifications

  • Supply Voltage: 10V - 15V
  • Operating Temperature Range: -40°C to +125°C
  • Output Current: 2A (source/sink)
  • Propagation Delay: 50ns (typical)
  • Rise/Fall Time: 20ns (typical)

Detailed Pin Configuration

  1. VDD: Power supply voltage input
  2. VSS: Ground reference
  3. IN1: Input for controlling the high-side MOSFET
  4. LO1: Low-side output for driving the high-side MOSFET
  5. HO1: High-side output for driving the high-side MOSFET
  6. IN2: Input for controlling the low-side MOSFET
  7. LO2: Low-side output for driving the low-side MOSFET
  8. HO2: High-side output for driving the low-side MOSFET

Functional Features

  • High-frequency switching capability
  • Integrated bootstrap diode
  • Under-voltage lockout protection
  • Over-current protection
  • Shoot-through prevention

Advantages and Disadvantages

Advantages

  • High-frequency operation allows for efficient power conversion
  • Integrated protection features enhance system reliability
  • Compact package size enables space-saving designs

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Requires external components for complete half-bridge implementation

Working Principles

The HIP2100IBT operates by receiving control signals on the input pins (IN1 and IN2) to drive the corresponding high-side and low-side MOSFETs. The integrated bootstrap diode simplifies the design by providing the necessary voltage for driving the high-side MOSFET. The device incorporates protection features such as under-voltage lockout and over-current protection to ensure safe operation.

Detailed Application Field Plans

The HIP2100IBT is commonly used in various applications, including:

  1. Switching power supplies
  2. Motor drives
  3. DC-DC converters
  4. Inverters
  5. Uninterruptible power supplies (UPS)
  6. Solar inverters

Detailed and Complete Alternative Models

  1. HIP2101IBT: Similar to HIP2100IBT with enhanced output current capability.
  2. HIP2102IBT: Half-bridge gate driver IC with additional fault reporting features.
  3. HIP2103IBT: High-frequency gate driver IC with integrated level shifting functionality.

(Note: These alternative models are provided for reference purposes and may have different specifications and pin configurations.)

Word count: 409 words

10 pirs û bersivên hevpar ên têkildarî sepana HIP2100IBT di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of HIP2100IBT in technical solutions:

  1. Q: What is HIP2100IBT? A: HIP2100IBT is a high-side switch used for controlling power in various technical applications.

  2. Q: What voltage range does HIP2100IBT support? A: HIP2100IBT supports a voltage range of 4.5V to 60V.

  3. Q: Can HIP2100IBT handle high currents? A: Yes, HIP2100IBT can handle high currents up to 2A.

  4. Q: What type of load can be controlled using HIP2100IBT? A: HIP2100IBT can control resistive, inductive, and capacitive loads.

  5. Q: Does HIP2100IBT have built-in protection features? A: Yes, HIP2100IBT has built-in protection features such as overcurrent protection and thermal shutdown.

  6. Q: Can HIP2100IBT be used in automotive applications? A: Yes, HIP2100IBT is suitable for automotive applications due to its wide voltage range and robust design.

  7. Q: How is HIP2100IBT controlled? A: HIP2100IBT can be controlled using a digital input signal or through a microcontroller.

  8. Q: Is HIP2100IBT compatible with PWM signals? A: Yes, HIP2100IBT is compatible with PWM (Pulse Width Modulation) signals for precise control.

  9. Q: Can HIP2100IBT be used in battery-powered applications? A: Yes, HIP2100IBT can be used in battery-powered applications due to its low quiescent current.

  10. Q: Are there any application notes or reference designs available for HIP2100IBT? A: Yes, the manufacturer provides application notes and reference designs to assist in the implementation of HIP2100IBT in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases.