Intersil
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
HIP6004BCR-T
Binêre Detail DataSheets

HIP6004BCR-T

Product Overview

Category

HIP6004BCR-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • Compact size
  • High efficiency

Package

HIP6004BCR-T is available in a small outline package (SOP) format.

Essence

The essence of HIP6004BCR-T lies in its ability to efficiently manage power in electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

The specifications of HIP6004BCR-T are as follows:

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Maximum Output Current: 4A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

HIP6004BCR-T features the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground reference
  3. EN: Enable pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. SS: Soft-start pin
  7. PGND: Power ground
  8. SW: Switch node

Functional Features

The functional features of HIP6004BCR-T include:

  • Wide input voltage range for compatibility with various power sources
  • High output current capability for powering demanding loads
  • Adjustable output voltage to accommodate different device requirements
  • Efficient switching frequency for improved power conversion efficiency
  • Soft-start function to minimize inrush current during startup

Advantages and Disadvantages

Advantages: - Compact size allows for space-efficient integration into electronic devices - High efficiency results in reduced power consumption and heat generation - Wide input voltage range provides flexibility in power source selection

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Requires external components for proper operation, increasing overall system complexity

Working Principles

HIP6004BCR-T operates based on the principles of pulse width modulation (PWM) control. It regulates the output voltage by adjusting the duty cycle of the switching signal, which controls the power delivered to the load.

Detailed Application Field Plans

HIP6004BCR-T finds application in various fields, including:

  1. Consumer electronics: Power management in smartphones, tablets, and portable devices.
  2. Industrial equipment: Control systems, motor drives, and power supplies.
  3. Automotive electronics: LED lighting, infotainment systems, and power distribution modules.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to HIP6004BCR-T are:

  1. LM2596S-ADJ: Adjustable step-down voltage regulator IC.
  2. LT1763-5: Low dropout linear regulator IC.
  3. TPS54331: Synchronous buck converter IC.

These alternative models can be considered based on specific application requirements and design constraints.

In conclusion, HIP6004BCR-T is a compact and efficient integrated circuit used for power management in various electronic devices. Its wide input voltage range, high output current capability, and adjustable output voltage make it suitable for diverse applications. However, it has limitations in terms of maximum output current and requires additional external components for proper operation.

10 pirs û bersivên hevpar ên têkildarî sepana HIP6004BCR-T di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of HIP6004BCR-T in technical solutions:

  1. Q: What is HIP6004BCR-T? A: HIP6004BCR-T is a high-performance, synchronous buck controller IC designed for use in various power supply applications.

  2. Q: What is the input voltage range supported by HIP6004BCR-T? A: HIP6004BCR-T supports an input voltage range from 4.5V to 60V, making it suitable for a wide range of applications.

  3. Q: What is the output voltage range that can be achieved using HIP6004BCR-T? A: The output voltage range of HIP6004BCR-T depends on the external components used in the design. It can support output voltages as low as 0.8V.

  4. Q: Can HIP6004BCR-T handle high current loads? A: Yes, HIP6004BCR-T is capable of driving high current loads with its integrated MOSFET drivers and external power MOSFETs.

  5. Q: Does HIP6004BCR-T have any protection features? A: Yes, HIP6004BCR-T includes various protection features such as overvoltage protection (OVP), undervoltage lockout (UVLO), and thermal shutdown.

  6. Q: Can HIP6004BCR-T operate in a wide temperature range? A: Yes, HIP6004BCR-T has a wide operating temperature range of -40°C to +125°C, allowing it to function reliably in various environments.

  7. Q: Is HIP6004BCR-T easy to configure and control? A: Yes, HIP6004BCR-T offers a simple and flexible configuration through its adjustable frequency, soft-start, and power good features.

  8. Q: Can HIP6004BCR-T be used in battery-powered applications? A: Yes, HIP6004BCR-T is suitable for battery-powered applications as it supports low quiescent current and offers excellent efficiency.

  9. Q: What type of feedback control does HIP6004BCR-T use? A: HIP6004BCR-T utilizes voltage mode control, which provides stable regulation and fast transient response.

  10. Q: Are there any evaluation boards or reference designs available for HIP6004BCR-T? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs that can help users quickly prototype and implement solutions using HIP6004BCR-T.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes for detailed information.