Intersil
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
ISL59482IRZ-T13
Binêre Detail DataSheets

ISL59482IRZ-T13

Product Overview

Category

ISL59482IRZ-T13 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal conditioning and amplification.

Characteristics

  • Signal conditioning and amplification capabilities
  • High precision and accuracy
  • Low power consumption
  • Compact size

Package

ISL59482IRZ-T13 is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL59482IRZ-T13 lies in its ability to enhance and optimize signals for various applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Gain Bandwidth Product: 100MHz
  • Input Offset Voltage: ±1mV
  • Output Current: ±50mA
  • Package Type: SOIC-8

Detailed Pin Configuration

ISL59482IRZ-T13 has a total of 8 pins:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. IN+: Non-inverting input
  4. IN-: Inverting input
  5. OUT: Amplified output
  6. NC: No connection
  7. NC: No connection
  8. SHDN: Shutdown control input

Functional Features

  • High gain and bandwidth for accurate signal amplification
  • Low input offset voltage for precise signal conditioning
  • Shutdown control for power-saving mode
  • Wide operating voltage range for versatile applications

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Low power consumption
  • Compact size for space-constrained applications
  • Versatile operating voltage range

Disadvantages

  • Limited output current capability
  • Noisy performance in high-frequency applications

Working Principles

ISL59482IRZ-T13 operates based on the principles of operational amplifiers. It takes an input signal, conditions and amplifies it, and provides an amplified output signal with improved characteristics. The device utilizes internal circuitry to achieve high gain, low offset voltage, and wide bandwidth.

Detailed Application Field Plans

ISL59482IRZ-T13 finds applications in various fields, including but not limited to: 1. Audio amplification systems 2. Sensor signal conditioning 3. Communication equipment 4. Industrial automation 5. Medical devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL59482IRZ-T13 are: 1. AD8221ARZ: Precision Instrumentation Amplifier 2. LM358N: Dual Operational Amplifier 3. TL072CP: Low Noise JFET Input Operational Amplifier 4. MCP6002-I/P: Dual Op-Amp, Rail-to-Rail Output

These alternative models offer similar functionalities and can be used as substitutes depending on specific requirements.

Word count: 346 words

10 pirs û bersivên hevpar ên têkildarî sepana ISL59482IRZ-T13 di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of ISL59482IRZ-T13 in technical solutions:

  1. Q: What is ISL59482IRZ-T13? A: ISL59482IRZ-T13 is a high-speed, quad-channel differential line driver designed for driving balanced data transmission lines.

  2. Q: What is the maximum data rate supported by ISL59482IRZ-T13? A: The maximum data rate supported by ISL59482IRZ-T13 is 400 Mbps.

  3. Q: Can ISL59482IRZ-T13 be used for long-distance data transmission? A: Yes, ISL59482IRZ-T13 can be used for long-distance data transmission as it provides excellent signal integrity and noise immunity.

  4. Q: What is the supply voltage range for ISL59482IRZ-T13? A: The supply voltage range for ISL59482IRZ-T13 is typically between 3.0V and 3.6V.

  5. Q: Does ISL59482IRZ-T13 support hot-plugging of devices? A: Yes, ISL59482IRZ-T13 supports hot-plugging of devices, making it convenient for applications where devices may be connected or disconnected while the system is powered on.

  6. Q: Can ISL59482IRZ-T13 be used in automotive applications? A: Yes, ISL59482IRZ-T13 is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.

  7. Q: What is the operating temperature range for ISL59482IRZ-T13? A: The operating temperature range for ISL59482IRZ-T13 is -40°C to +125°C.

  8. Q: Does ISL59482IRZ-T13 have built-in protection features? A: Yes, ISL59482IRZ-T13 has built-in protection features such as thermal shutdown and short-circuit protection.

  9. Q: Can ISL59482IRZ-T13 be used in industrial control systems? A: Yes, ISL59482IRZ-T13 is suitable for industrial control systems due to its robustness and reliability.

  10. Q: What package does ISL59482IRZ-T13 come in? A: ISL59482IRZ-T13 comes in a 16-lead QFN (Quad Flat No-Lead) package.