Intersil
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
ISL6596CBZ
Binêre Detail DataSheets

ISL6596CBZ

Product Overview

Category

ISL6596CBZ belongs to the category of integrated circuits (ICs).

Use

The ISL6596CBZ is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

ISL6596CBZ comes in a compact package, typically a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6596CBZ lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

ISL6596CBZ is usually packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.3V
  • Maximum Output Current: 10A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ISL6596CBZ has a total of 16 pins. Here is the detailed pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VCC: Supply voltage pin
  4. COMP: Compensation pin
  5. FB: Feedback pin
  6. SS/TR: Soft-start/Tracking pin
  7. RT/CLK: Timing resistor/clock synchronization pin
  8. SYNC: Synchronization pin
  9. BOOT: Bootstrap pin
  10. LX: Switch node pin
  11. PGND: Power ground pin
  12. PGND: Power ground pin
  13. VSENSE: Current sense pin
  14. VSENSE: Current sense pin
  15. VSENSE: Current sense pin
  16. VSENSE: Current sense pin

Functional Features

  • High-efficiency synchronous buck controller
  • Adaptive on-time control architecture
  • Integrated bootstrap diode
  • Adjustable soft-start time
  • Overcurrent protection
  • Undervoltage lockout (UVLO) protection
  • Power-good output indicator

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact size allows for space-saving designs
  • Integrated bootstrap diode simplifies circuitry
  • Adjustable soft-start time enables controlled power-up sequences

Disadvantages

  • Limited input voltage range (4.5V to 5.5V)
  • Maximum output current may not be sufficient for high-power applications

Working Principles

The ISL6596CBZ operates as a synchronous buck controller, regulating the output voltage by adjusting the duty cycle of the switching transistor. It utilizes an adaptive on-time control architecture to achieve high efficiency and fast transient response.

Detailed Application Field Plans

The ISL6596CBZ is commonly used in various power management applications, including but not limited to: - DC-DC converters - Voltage regulators - Power supplies - Battery charging circuits

Detailed and Complete Alternative Models

Here are some alternative models that offer similar functionality to the ISL6596CBZ: - LM2596S-ADJ - LT8610ABEMSE#PBF - TPS54332DDAR

These alternative models can be considered based on specific requirements and design constraints.

In conclusion, the ISL6596CBZ is a highly efficient integrated circuit used for power management applications. Its compact size, adjustable soft-start time, and integrated bootstrap diode make it a versatile choice for various electronic devices. However, designers should consider its limited input voltage range and maximum output current when selecting this IC for high-power applications.

10 pirs û bersivên hevpar ên têkildarî sepana ISL6596CBZ di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of ISL6596CBZ in technical solutions:

  1. Q: What is ISL6596CBZ? A: ISL6596CBZ is a high-performance, dual-output synchronous buck controller IC used for voltage regulation in various technical applications.

  2. Q: What is the input voltage range supported by ISL6596CBZ? A: The input voltage range supported by ISL6596CBZ is typically between 4.5V and 24V.

  3. Q: What is the output voltage range that can be achieved using ISL6596CBZ? A: The output voltage range achievable with ISL6596CBZ depends on the external components used, but it can typically range from 0.8V to 5.5V.

  4. Q: Can ISL6596CBZ handle high current loads? A: Yes, ISL6596CBZ is designed to handle high current loads. It has a maximum continuous output current rating of up to 20A.

  5. Q: Does ISL6596CBZ support synchronous rectification? A: Yes, ISL6596CBZ supports synchronous rectification, which improves efficiency by reducing power losses.

  6. Q: What is the switching frequency range of ISL6596CBZ? A: The switching frequency range of ISL6596CBZ is typically between 100kHz and 1MHz, but it can be adjusted using external components.

  7. Q: Can ISL6596CBZ operate in a wide temperature range? A: Yes, ISL6596CBZ is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  8. Q: Does ISL6596CBZ have built-in protection features? A: Yes, ISL6596CBZ incorporates various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  9. Q: Can ISL6596CBZ be used in battery-powered applications? A: Yes, ISL6596CBZ can be used in battery-powered applications as it supports a wide input voltage range and has low quiescent current.

  10. Q: What are some typical applications of ISL6596CBZ? A: ISL6596CBZ is commonly used in applications such as point-of-load power supplies, telecom equipment, industrial automation, and embedded systems.

Please note that the answers provided here are general and may vary depending on specific design considerations and requirements.