Intersil
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
ISL6610ACBZ
Binêre Detail DataSheets

ISL6610ACBZ

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - High efficiency - Low dropout voltage - Adjustable output voltage - Overcurrent protection - Thermal shutdown protection

Package: CBZ package

Essence: The ISL6610ACBZ is a voltage regulator IC that provides stable and regulated output voltage for various electronic devices.

Packaging/Quantity: The ISL6610ACBZ is available in a CBZ package and is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Maximum Output Current: 3A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 120μA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL6610ACBZ has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback pin for adjusting output voltage
  4. EN: Enable pin for turning the regulator on/off
  5. VOUT: Regulated output voltage
  6. PG: Power good indicator
  7. SS: Soft-start capacitor connection
  8. BST: Bootstrap capacitor connection

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • Adjustable output voltage enables customization for different applications.
  • Overcurrent protection safeguards against excessive current flow.
  • Thermal shutdown protection prevents overheating and damage to the IC.

Advantages and Disadvantages

Advantages: - High efficiency results in minimal power loss. - Low dropout voltage ensures efficient power delivery. - Compact size and lightweight design. - Suitable for a wide range of applications.

Disadvantages: - Limited maximum output current may not be suitable for high-power devices. - Requires external components for proper operation.

Working Principles

The ISL6610ACBZ operates as a voltage regulator by maintaining a stable output voltage regardless of variations in the input voltage. It achieves this through a combination of feedback control, error amplification, and power switching techniques. The IC continuously monitors the output voltage and adjusts the internal circuitry to maintain the desired voltage level.

Detailed Application Field Plans

The ISL6610ACBZ is commonly used in the following applications:

  1. Portable electronic devices
  2. Battery-powered systems
  3. IoT devices
  4. Embedded systems
  5. Consumer electronics

Alternative Models

Some alternative models that can be considered as alternatives to the ISL6610ACBZ are:

  1. LM317T
  2. LT1086
  3. LM7805
  4. LM1117
  5. TPS7A4700

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, the ISL6610ACBZ is a versatile voltage regulator IC that provides stable and regulated output voltage for various electronic devices. Its high efficiency, low dropout voltage, and adjustable output voltage make it suitable for a wide range of applications. However, its limited maximum output current and requirement for external components should be taken into consideration when selecting an appropriate voltage regulator for high-power devices.

10 pirs û bersivên hevpar ên têkildarî sepana ISL6610ACBZ di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of ISL6610ACBZ in technical solutions:

  1. Q: What is ISL6610ACBZ? A: ISL6610ACBZ is a high-performance, dual synchronous buck MOSFET driver designed for applications requiring high efficiency and compact size.

  2. Q: What is the maximum operating voltage of ISL6610ACBZ? A: The maximum operating voltage of ISL6610ACBZ is typically 5.5V.

  3. Q: What is the output current capability of ISL6610ACBZ? A: ISL6610ACBZ can deliver up to 6A of peak current per channel.

  4. Q: Can ISL6610ACBZ be used in automotive applications? A: Yes, ISL6610ACBZ is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.

  5. Q: Does ISL6610ACBZ have built-in protection features? A: Yes, ISL6610ACBZ includes various protection features such as overcurrent protection, undervoltage lockout, and thermal shutdown.

  6. Q: What is the typical switching frequency range supported by ISL6610ACBZ? A: ISL6610ACBZ supports a wide range of switching frequencies from 100kHz to 2MHz.

  7. Q: Can ISL6610ACBZ operate with both N-channel and P-channel MOSFETs? A: Yes, ISL6610ACBZ is compatible with both N-channel and P-channel MOSFETs.

  8. Q: Is ISL6610ACBZ suitable for battery-powered applications? A: Yes, ISL6610ACBZ is designed to operate efficiently in battery-powered applications due to its low quiescent current and high efficiency.

  9. Q: What is the package type of ISL6610ACBZ? A: ISL6610ACBZ is available in a compact 8-lead SOIC package.

  10. Q: Can ISL6610ACBZ be used in multi-phase buck converter designs? A: Yes, ISL6610ACBZ can be easily configured for multi-phase operation, making it suitable for high-current applications.

Please note that these answers are general and may vary depending on specific application requirements.