Intersil
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
ISL84521IB-T
Binêre Detail DataSheets

ISL84521IB-T

Product Overview

Category

ISL84521IB-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal switching and amplification.

Characteristics

  • Integrated circuit
  • Signal switching and amplification
  • Small form factor
  • Low power consumption

Package

ISL84521IB-T is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL84521IB-T lies in its ability to efficiently switch and amplify signals in electronic devices.

Packaging/Quantity

ISL84521IB-T is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • On-Resistance: 1.5Ω (typical)
  • Off-State Leakage Current: 1nA (maximum)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOIC-8

Detailed Pin Configuration

ISL84521IB-T features an 8-pin configuration as follows:

  1. V+ (Positive Power Supply)
  2. IN1 (Input 1)
  3. IN2 (Input 2)
  4. GND (Ground)
  5. NO (Normally Open)
  6. COM (Common)
  7. NC (Not Connected)
  8. V- (Negative Power Supply)

Functional Features

  • Low on-resistance
  • High input voltage range
  • Fast switching speed
  • Low power consumption
  • ESD protection

Advantages and Disadvantages

Advantages

  • Efficient signal switching and amplification
  • Wide input voltage range
  • Compact size
  • Low power consumption
  • Protection against electrostatic discharge (ESD)

Disadvantages

  • Limited number of inputs and outputs
  • May require additional components for specific applications

Working Principles

ISL84521IB-T operates by controlling the flow of signals between its input and output pins. When a control signal is applied to the appropriate pin, the IC switches the connection between the input and output, allowing or blocking the signal flow.

Detailed Application Field Plans

ISL84521IB-T finds applications in various electronic devices, including but not limited to: - Audio amplifiers - Data acquisition systems - Industrial automation equipment - Medical devices - Test and measurement instruments

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL84521IB-T are: - ADG849 - MAX4618 - DG408

These models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 314 words

10 pirs û bersivên hevpar ên têkildarî sepana ISL84521IB-T di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of ISL84521IB-T in technical solutions:

  1. Q: What is ISL84521IB-T? A: ISL84521IB-T is a high-speed, dual-channel digital isolator designed for use in various technical solutions.

  2. Q: What is the maximum data rate supported by ISL84521IB-T? A: ISL84521IB-T supports a maximum data rate of 100 Mbps.

  3. Q: Can ISL84521IB-T be used in industrial applications? A: Yes, ISL84521IB-T is suitable for use in industrial applications due to its robustness and reliability.

  4. Q: Does ISL84521IB-T provide galvanic isolation between channels? A: Yes, ISL84521IB-T provides galvanic isolation between its two channels, ensuring electrical isolation between connected systems.

  5. Q: What is the operating voltage range of ISL84521IB-T? A: ISL84521IB-T operates within a voltage range of 2.25V to 5.5V.

  6. Q: Can ISL84521IB-T be used in automotive applications? A: Yes, ISL84521IB-T is suitable for use in automotive applications, as it meets the necessary standards and requirements.

  7. Q: Does ISL84521IB-T support bidirectional communication? A: Yes, ISL84521IB-T supports bidirectional communication, allowing data transmission in both directions.

  8. Q: What is the typical propagation delay of ISL84521IB-T? A: The typical propagation delay of ISL84521IB-T is around 20 ns.

  9. Q: Can ISL84521IB-T be used in low-power applications? A: Yes, ISL84521IB-T is designed to operate with low power consumption, making it suitable for low-power applications.

  10. Q: Is ISL84521IB-T RoHS compliant? A: Yes, ISL84521IB-T is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that these answers are general and may vary depending on the specific application and requirements.