Intersil
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
ISL8842AAUZ-T
Binêre Detail DataSheets

ISL8842AAUZ-T

Product Overview

Category

ISL8842AAUZ-T belongs to the category of integrated circuits (ICs).

Use

It is commonly used in power management applications.

Characteristics

  • High efficiency
  • Low quiescent current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL8842AAUZ-T is available in a small outline package (SOP) with 8 pins.

Essence

The essence of ISL8842AAUZ-T lies in its ability to efficiently regulate and control power in various electronic devices.

Packaging/Quantity

ISL8842AAUZ-T is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 3A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

ISL8842AAUZ-T has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. EN: Enable pin for turning the IC on/off
  6. SS: Soft-start pin for gradual startup
  7. PGND: Power ground reference
  8. VOUT: Output voltage

Functional Features

  • Voltage regulation: ISL8842AAUZ-T provides precise voltage regulation for stable power supply.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown protection: The IC includes thermal shutdown protection to prevent overheating.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows compatibility with various power sources.
  • Adjustable output voltage provides flexibility in different applications.
  • Overcurrent and thermal shutdown protection enhance device safety.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Requires careful consideration of external components for optimal performance.

Working Principles

ISL8842AAUZ-T operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the internal switch. This control mechanism ensures efficient power transfer and stable voltage regulation.

Detailed Application Field Plans

ISL8842AAUZ-T finds application in various fields, including but not limited to: - Power supplies for consumer electronics - Industrial automation systems - Automotive electronics - LED lighting systems - Battery charging circuits

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL8842AAUZ-T are: - LM2576-ADJ - LT1073-12 - TPS5430DDAR - MAX5035AUPA

These alternatives can be considered based on specific requirements and design constraints.

Word count: 345 words

10 pirs û bersivên hevpar ên têkildarî sepana ISL8842AAUZ-T di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of ISL8842AAUZ-T in technical solutions:

  1. Q: What is ISL8842AAUZ-T? A: ISL8842AAUZ-T is a high-performance synchronous buck controller IC designed for various power supply applications.

  2. Q: What is the input voltage range supported by ISL8842AAUZ-T? A: The input voltage range supported by ISL8842AAUZ-T is typically between 4.5V and 14V.

  3. Q: What is the output voltage range that can be achieved using ISL8842AAUZ-T? A: The output voltage range that can be achieved using ISL8842AAUZ-T depends on the external components used, but it is typically between 0.6V and 5.5V.

  4. Q: What is the maximum output current that ISL8842AAUZ-T can handle? A: ISL8842AAUZ-T can handle a maximum output current of up to 20A.

  5. Q: Is ISL8842AAUZ-T suitable for battery-powered applications? A: Yes, ISL8842AAUZ-T is suitable for battery-powered applications as it has low quiescent current and supports a wide input voltage range.

  6. Q: Does ISL8842AAUZ-T have built-in protection features? A: Yes, ISL8842AAUZ-T has built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  7. Q: Can ISL8842AAUZ-T operate in a wide temperature range? A: Yes, ISL8842AAUZ-T can operate in a wide temperature range, typically between -40°C and 85°C.

  8. Q: What type of control method does ISL8842AAUZ-T use? A: ISL8842AAUZ-T uses voltage mode control for regulating the output voltage.

  9. Q: Can ISL8842AAUZ-T be used in automotive applications? A: Yes, ISL8842AAUZ-T is suitable for automotive applications as it meets the necessary automotive standards and has a wide input voltage range.

  10. Q: Are there any evaluation boards or reference designs available for ISL8842AAUZ-T? A: Yes, Intersil provides evaluation boards and reference designs for ISL8842AAUZ-T to help with the development and testing of power supply solutions.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.