ISL89160FBEAZ-T
Product Overview
Category
ISL89160FBEAZ-T belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in electronic devices for power management applications.
Characteristics
- Integrated circuit
- Power management functionality
- High efficiency
- Small form factor
Package
ISL89160FBEAZ-T is available in a compact package, which ensures easy integration into various electronic devices.
Essence
The essence of ISL89160FBEAZ-T lies in its ability to efficiently manage power in electronic devices, ensuring optimal performance and energy conservation.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 0.6V to VIN
- Maximum Continuous Output Current: 1.6A
- Switching Frequency: 1MHz
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
ISL89160FBEAZ-T features the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- SW: Switching pin
- PG: Power good pin
Functional Features
- High efficiency power conversion
- Overcurrent protection
- Thermal shutdown protection
- Soft-start functionality
- Adjustable output voltage
Advantages and Disadvantages
Advantages
- High efficiency leads to reduced power consumption
- Compact size allows for easy integration
- Wide input voltage range enhances versatility
- Comprehensive protection features ensure device safety
Disadvantages
- Limited maximum continuous output current may not be suitable for high-power applications
- Relatively high switching frequency may introduce electromagnetic interference in sensitive systems
Working Principles
ISL89160FBEAZ-T operates on the principle of pulse width modulation (PWM) to regulate the output voltage. It utilizes a high-frequency switching transistor to control the power flow and maintain the desired output voltage level.
Detailed Application Field Plans
ISL89160FBEAZ-T finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices
Detailed and Complete Alternative Models
- ISL89161FBEAZ-T: Similar to ISL89160FBEAZ-T with higher maximum continuous output current (2A).
- ISL89162FBEAZ-T: Similar to ISL89160FBEAZ-T with lower maximum continuous output current (1A).
- ISL89163FBEAZ-T: Similar to ISL89160FBEAZ-T with wider input voltage range (2.5V to 6.5V).
These alternative models provide flexibility in choosing the appropriate IC based on specific requirements.
Word count: 324 words
10 pirs û bersivên hevpar ên têkildarî sepana ISL89160FBEAZ-T di çareseriyên teknîkî de navnîş bikin
Sure! Here are 10 common questions and answers related to the application of ISL89160FBEAZ-T in technical solutions:
Q: What is ISL89160FBEAZ-T? A: ISL89160FBEAZ-T is a high-performance, low-side load switch designed for use in various technical solutions.
Q: What are the key features of ISL89160FBEAZ-T? A: Some key features include low on-resistance, wide input voltage range, overcurrent protection, and thermal shutdown.
Q: What is the maximum load current that ISL89160FBEAZ-T can handle? A: ISL89160FBEAZ-T can handle a maximum load current of up to 6A.
Q: What is the input voltage range supported by ISL89160FBEAZ-T? A: The input voltage range supported by ISL89160FBEAZ-T is typically between 1.8V and 5.5V.
Q: Can ISL89160FBEAZ-T be used in battery-powered applications? A: Yes, ISL89160FBEAZ-T can be used in battery-powered applications as it has a low quiescent current and supports low-voltage operation.
Q: Does ISL89160FBEAZ-T have built-in protection features? A: Yes, ISL89160FBEAZ-T has built-in overcurrent protection and thermal shutdown to protect against faults and overheating.
Q: What is the typical response time of ISL89160FBEAZ-T in case of an overcurrent event? A: The typical response time of ISL89160FBEAZ-T in case of an overcurrent event is around 1µs.
Q: Can ISL89160FBEAZ-T be used in automotive applications? A: Yes, ISL89160FBEAZ-T is suitable for automotive applications as it meets the necessary automotive standards and has a wide operating temperature range.
Q: What is the package type of ISL89160FBEAZ-T? A: ISL89160FBEAZ-T is available in a compact 6-lead SC-70 package.
Q: Are there any evaluation boards or reference designs available for ISL89160FBEAZ-T? A: Yes, Intersil provides evaluation boards and reference designs to help users quickly prototype and integrate ISL89160FBEAZ-T into their technical solutions.
Please note that the answers provided here are general and may vary depending on the specific application requirements and datasheet specifications.