IXYS
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
IXFH80N10Q
Binêre Detail DataSheets

IXFH80N10Q

Product Overview

Category

The IXFH80N10Q belongs to the category of power MOSFETs.

Use

It is commonly used in power electronics applications such as motor control, power supplies, and inverters.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The IXFH80N10Q is typically available in a TO-247 package.

Essence

This MOSFET is essential for efficient power management and control in various electronic systems.

Packaging/Quantity

It is usually packaged individually and sold in quantities suitable for production or prototyping needs.

Specifications

  • Voltage Rating: 100V
  • Current Rating: 80A
  • On-Resistance: 0.01 ohms
  • Gate-Source Voltage (Max): ±20V
  • Total Gate Charge: 120nC

Detailed Pin Configuration

The pin configuration of the IXFH80N10Q typically includes three pins: gate, drain, and source. The gate pin is used to control the switching behavior of the MOSFET, while the drain and source pins are connected in the circuit to manage the flow of current.

Functional Features

  • High voltage capability allows for use in a wide range of applications.
  • Low on-resistance minimizes power loss and heat generation.
  • Fast switching speed enables efficient power control and regulation.
  • Low gate charge facilitates quick and precise control of the MOSFET.

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Disadvantages

  • May require careful consideration of driving circuitry due to high gate-source voltage.

Working Principles

The IXFH80N10Q operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. By modulating the gate voltage, the MOSFET can efficiently regulate power flow within a circuit.

Detailed Application Field Plans

The IXFH80N10Q is well-suited for a variety of applications including: - Motor control systems - Power supply units - Inverters for renewable energy systems - Industrial automation equipment

Detailed and Complete Alternative Models

  • IXFH90N10Q
  • IXFH70N10Q
  • IXFH60N10Q
  • IXFH50N10Q

These alternative models offer similar performance characteristics and can be considered as substitutes for the IXFH80N10Q based on specific application requirements.

In conclusion, the IXFH80N10Q power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it an essential component for power management in various electronic systems. Its functional features, advantages, and detailed application field plans demonstrate its versatility and suitability for a wide range of applications.

(Word count: 413)

10 pirs û bersivên hevpar ên têkildarî sepana IXFH80N10Q di çareseriyên teknîkî de navnîş bikin

  1. What is IXFH80N10Q?

    • IXFH80N10Q is a power MOSFET transistor designed for high efficiency and high frequency applications.

  2. What is the maximum voltage rating of IXFH80N10Q?

    • The maximum voltage rating of IXFH80N10Q is 100V.

  3. What is the maximum current rating of IXFH80N10Q?

    • The maximum continuous drain current rating of IXFH80N10Q is 80A.

  4. What are the typical applications of IXFH80N10Q?

    • IXFH80N10Q is commonly used in applications such as switch mode power supplies, motor control, and high frequency DC-DC converters.

  5. What is the on-resistance of IXFH80N10Q?

    • The on-resistance of IXFH80N10Q is typically around 0.012 ohms.

  6. Is IXFH80N10Q suitable for high frequency applications?

    • Yes, IXFH80N10Q is specifically designed for high frequency applications due to its low on-resistance and fast switching characteristics.

  7. Does IXFH80N10Q require a heat sink for operation?

    • The need for a heat sink depends on the specific application and the power dissipation requirements. In high power applications, a heat sink may be necessary.

  8. What is the gate threshold voltage of IXFH80N10Q?

    • The gate threshold voltage of IXFH80N10Q typically ranges from 2V to 4V.

  9. Can IXFH80N10Q be used in automotive applications?

    • Yes, IXFH80N10Q is suitable for automotive applications where high efficiency and high current handling capabilities are required.

  10. Are there any recommended driver ICs for driving IXFH80N10Q?

    • Yes, there are several driver ICs available that are compatible with IXFH80N10Q, such as IR2110 and IR2104. These driver ICs provide the necessary gate drive voltage and current for optimal performance.