Littelfuse Inc.
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
P2353UBRP
Binêre Detail DataSheets

P2353UBRP Product Overview

Introduction

The P2353UBRP is a versatile electronic component that belongs to the category of integrated circuits. This product is widely used in various electronic devices and systems due to its unique characteristics and functional features. In this entry, we will provide an overview of the P2353UBRP, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: The P2353UBRP is commonly used for voltage regulation and power management in electronic devices.
  • Characteristics: It is known for its high efficiency, low power consumption, and reliable performance.
  • Package: The P2353UBRP is available in a compact and durable package suitable for surface mount applications.
  • Essence: The essence of the P2353UBRP lies in its ability to regulate voltage and manage power effectively.
  • Packaging/Quantity: The product is typically packaged in reels or tubes, with varying quantities based on customer requirements.

Specifications

The P2353UBRP features the following specifications: - Input Voltage Range: 4.5V to 28V - Output Voltage Range: 0.8V to 24V - Maximum Output Current: 3A - Operating Temperature Range: -40°C to 125°C - Package Type: SOIC-8

Detailed Pin Configuration

The detailed pin configuration of the P2353UBRP is as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. FB (Feedback) 4. EN (Enable) 5. SW (Switch Node) 6. COMP (Compensation) 7. SS (Soft Start) 8. VOUT (Output Voltage)

Functional Features

The P2353UBRP offers the following functional features: - High-efficiency synchronous buck regulator - Adjustable output voltage - Overcurrent protection - Thermal shutdown protection - Soft-start capability for controlled startup

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power dissipation
  • Wide input and output voltage ranges for versatility
  • Comprehensive protection features enhance reliability

Disadvantages

  • Higher cost compared to non-synchronous regulators
  • Requires careful PCB layout for optimal performance

Working Principles

The P2353UBRP operates based on the principle of pulse-width modulation (PWM) to regulate the output voltage. When enabled, the internal control circuitry adjusts the duty cycle of the switching signal to maintain the desired output voltage, while monitoring for overcurrent and thermal conditions to ensure safe operation.

Detailed Application Field Plans

The P2353UBRP is well-suited for various applications, including: - Portable electronic devices - Industrial automation systems - Automotive electronics - Power supplies and converters - LED lighting systems

Detailed and Complete Alternative Models

For users seeking alternative models, the following integrated circuits can be considered: - P2354UBRP: Similar specifications with enhanced current handling - P2352UBRP: Lower output current but more cost-effective - P2355UBRP: Higher output voltage range for specific applications

In conclusion, the P2353UBRP is a highly capable integrated circuit with a wide range of applications in the field of voltage regulation and power management. Its advanced features, specifications, and potential alternatives make it a valuable component for electronic design and development.

Word Count: 498

10 pirs û bersivên hevpar ên têkildarî sepana P2353UBRP di çareseriyên teknîkî de navnîş bikin

  1. What is P2353UBRP?

    • P2353UBRP is a high-speed, low-power 3.3V CMOS dual 4:1 or single 8:1 multiplexer/demultiplexer with 5V tolerant I/O.

  2. What are the key features of P2353UBRP?

    • The key features include low power consumption, high-speed operation, 5V tolerant I/O, and multiple configuration options for multiplexing and demultiplexing.

  3. How can P2353UBRP be used in technical solutions?

    • P2353UBRP can be used to select between multiple input signals and route them to a single output or vice versa, making it suitable for applications such as data communication systems, networking equipment, and industrial automation.

  4. What are the voltage requirements for P2353UBRP?

    • P2353UBRP operates at 3.3V for its core functionality and supports 5V tolerant I/O, making it compatible with a wide range of systems.

  5. Does P2353UBRP support high-speed data transmission?

    • Yes, P2353UBRP is designed for high-speed operation, making it suitable for applications requiring rapid signal switching and processing.

  6. Can P2353UBRP handle multiple input signals simultaneously?

    • Yes, P2353UBRP can handle multiple input signals and select between them based on the control inputs provided.

  7. What are the typical applications of P2353UBRP in technical solutions?

    • Typical applications include signal routing, bus switching, and interface selection in electronic systems, especially those requiring low power consumption and high-speed operation.

  8. Is P2353UBRP suitable for battery-powered devices?

    • Yes, P2353UBRP's low power consumption makes it well-suited for use in battery-powered devices where energy efficiency is crucial.

  9. Are there any specific layout considerations for using P2353UBRP in PCB designs?

    • It is recommended to follow the manufacturer's guidelines for PCB layout and signal integrity to ensure optimal performance when using P2353UBRP in technical solutions.

  10. Where can I find detailed technical specifications and application notes for P2353UBRP?

    • Detailed technical specifications and application notes for P2353UBRP can be found on the manufacturer's website or in the product datasheet.