Littelfuse Inc.
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
ROV20-112K
Binêre Detail DataSheets

ROV20-112K

Introduction

The ROV20-112K is a component belonging to the category of electronic resistors. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic resistor
  • Use: Used to limit or control the flow of electric current in a circuit
  • Characteristics: High precision, stable performance, compact size
  • Package: Typically available in surface mount packages
  • Essence: Provides precise resistance in electronic circuits
  • Packaging/Quantity: Available in reels or trays, quantity varies based on manufacturer

Specifications

  • Resistance Value: 112 kilohms
  • Power Rating: Varies based on manufacturer, typically around 0.125 watts
  • Tolerance: Standard tolerance is ±1%

Detailed Pin Configuration

The ROV20-112K typically has two terminals for connection within a circuit. The pin configuration follows the standard layout for surface mount resistors.

Functional Features

  • Precision: Offers high precision in controlling current flow
  • Stability: Maintains stable performance over time and varying conditions
  • Compact Size: Occupies minimal space on the circuit board

Advantages and Disadvantages

Advantages

  • Precise resistance control
  • Stable performance
  • Compact size

Disadvantages

  • Limited power handling capability
  • Sensitive to excessive heat

Working Principles

The ROV20-112K works by providing a specific resistance value to limit the flow of electric current in a circuit. It achieves this through the inherent properties of the resistor material and its construction.

Detailed Application Field Plans

The ROV20-112K is commonly used in various electronic devices and equipment, including: - Consumer electronics - Industrial control systems - Automotive electronics - Telecommunications equipment

Detailed and Complete Alternative Models

  • ROV10-110K: Similar characteristics with a lower power rating
  • ROV30-115K: Higher power handling capability with comparable resistance value
  • ROV20-111K: Slightly lower resistance value with similar power rating

In conclusion, the ROV20-112K electronic resistor offers high precision and stability in controlling current flow within electronic circuits. Its compact size makes it suitable for various applications, although it has limitations in power handling and heat sensitivity. Understanding its specifications, pin configuration, functional features, and alternative models is essential for effective utilization in electronic designs.

[Word Count: 366]

10 pirs û bersivên hevpar ên têkildarî sepana ROV20-112K di çareseriyên teknîkî de navnîş bikin

  1. What is the ROV20-112K?

    • The ROV20-112K is a remotely operated vehicle (ROV) designed for underwater exploration and inspection tasks.

  2. What are the key features of the ROV20-112K?

    • The ROV20-112K features high-definition cameras, powerful thrusters, manipulator arms, and a robust tether system for deep-sea operations.

  3. How deep can the ROV20-112K operate?

    • The ROV20-112K is capable of operating at depths of up to 3000 meters, making it suitable for a wide range of underwater applications.

  4. What technical solutions can the ROV20-112K be used for?

    • The ROV20-112K can be utilized for tasks such as pipeline inspection, offshore platform maintenance, underwater construction, marine research, and environmental monitoring.

  5. Does the ROV20-112K have any autonomous capabilities?

    • Yes, the ROV20-112K can be equipped with autonomous navigation systems for pre-programmed missions or obstacle avoidance.

  6. What kind of control system does the ROV20-112K use?

    • The ROV20-112K typically uses a joystick-based control system for intuitive operation by the pilot.

  7. Can the ROV20-112K be integrated with other equipment or sensors?

    • Yes, the ROV20-112K can be customized to integrate additional sensors, tools, or equipment based on specific project requirements.

  8. What are the power requirements for operating the ROV20-112K?

    • The ROV20-112K typically requires a power supply ranging from 200-400 volts, depending on the configuration and operational demands.

  9. Is training available for operating the ROV20-112K?

    • Yes, comprehensive training programs are available to ensure operators are proficient in controlling and maintaining the ROV20-112K.

  10. What kind of maintenance is required for the ROV20-112K?

    • Regular maintenance includes cleaning, lubrication, inspection of thrusters and cables, and software updates to ensure optimal performance and longevity of the ROV20-112K.