Littelfuse Inc.
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
SP0504BAATG
Binêre Detail DataSheets

SP0504BAATG

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Small form factor, high efficiency
Package: SOT-23-5
Essence: Regulates voltage to a specific level
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage: 1.8V to 3.3V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. NC
  4. EN
  5. VIN

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Small package size - Wide input voltage range - Low quiescent current

Disadvantages: - Limited maximum output current - Limited output voltage options

Working Principles

The SP0504BAATG is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using internal circuitry to adjust the output voltage based on the feedback from a reference voltage.

Detailed Application Field Plans

The SP0504BAATG is suitable for various battery-powered applications, such as portable electronic devices, IoT devices, and wearables. Its small form factor and low power consumption make it ideal for space-constrained and energy-efficient designs.

Detailed and Complete Alternative Models

  1. SPX504BAATG: Similar specifications with enhanced thermal performance
  2. SP0505BAATG: Higher maximum output current with a slightly larger package size
  3. SP0504CAATG: Lower dropout voltage for ultra-low power applications

This comprehensive entry provides an in-depth understanding of the SP0504BAATG, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

[Word Count: 298]

10 pirs û bersivên hevpar ên têkildarî sepana SP0504BAATG di çareseriyên teknîkî de navnîş bikin

  1. What is SP0504BAATG?

    • SP0504BAATG is a low capacitance TVS (transient voltage suppressor) diode designed to protect sensitive electronics from voltage transients and ESD (electrostatic discharge).

  2. What are the typical applications of SP0504BAATG?

    • SP0504BAATG is commonly used in applications such as USB ports, HDMI interfaces, Ethernet ports, and other high-speed data lines to protect against transient voltage events.

  3. What is the maximum working voltage of SP0504BAATG?

    • The maximum working voltage of SP0504BAATG is typically around 5V.

  4. What is the clamping voltage of SP0504BAATG?

    • The clamping voltage of SP0504BAATG is low, typically around 9V at 5A.

  5. What is the capacitance of SP0504BAATG?

    • The capacitance of SP0504BAATG is very low, typically around 0.6pF.

  6. How does SP0504BAATG protect against ESD?

    • SP0504BAATG provides a low-impedance path to ground for ESD events, diverting potentially damaging currents away from sensitive components.

  7. Can SP0504BAATG be used in automotive applications?

    • Yes, SP0504BAATG is suitable for use in automotive electronics to protect against voltage transients and ESD.

  8. What is the operating temperature range of SP0504BAATG?

    • The operating temperature range of SP0504BAATG is typically from -55°C to 125°C.

  9. Is SP0504BAATG RoHS compliant?

    • Yes, SP0504BAATG is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.

  10. Are there any recommended layout considerations when using SP0504BAATG?

    • Yes, it is recommended to minimize trace lengths and provide a low-impedance path to ground for optimal performance of SP0504BAATG.