Meixin Integrated
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
DS1267-100
Binêre Detail DataSheets

DS1267-100

Product Overview

Category: Electronic Component
Use: Digital Potentiometer
Characteristics: Programmable, Non-volatile Memory
Package: 8-pin SOIC
Essence: Provides digital control of resistance
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resistance Range: 0Ω to 100kΩ
  • Resolution: 256 Steps
  • Supply Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • End-to-End Resistance Tolerance: ±20%
  • Non-volatile Memory: Stores wiper position during power-off
  • Power Consumption: 1μA (standby), 3mA (active)

Pin Configuration

The DS1267-100 has the following pin configuration:

  1. VCC: Supply Voltage
  2. GND: Ground
  3. SDA: Serial Data Input/Output
  4. SCL: Serial Clock Input
  5. WP: Write Protect
  6. A0: Address Bit 0
  7. A1: Address Bit 1
  8. W: Wiper Terminal

Functional Features

  • Digital control of resistance through I2C interface
  • Non-volatile memory retains wiper position during power-off
  • 256 steps of resolution for precise adjustment
  • Low power consumption in standby mode
  • Write protect feature prevents accidental changes

Advantages

  • Easy integration into digital circuits
  • Precise and repeatable resistance adjustments
  • Non-volatile memory ensures settings are retained
  • Wide operating temperature range allows for various environments
  • Low power consumption extends battery life

Disadvantages

  • Limited resistance range compared to some other potentiometers
  • End-to-end resistance tolerance may affect precision in some applications
  • Limited availability of alternative models with similar specifications

Working Principles

The DS1267-100 is a digital potentiometer that replaces traditional mechanical potentiometers. It utilizes an I2C interface to receive digital commands and adjust the resistance accordingly. The non-volatile memory ensures that the wiper position is retained even when power is disconnected. This allows for precise and repeatable resistance adjustments in various electronic circuits.

Application Field Plans

The DS1267-100 finds applications in various fields, including:

  1. Audio Equipment: Volume control, tone adjustment
  2. Instrumentation: Calibration, signal conditioning
  3. Industrial Control Systems: Variable gain amplifiers, motor speed control
  4. Communication Systems: Signal attenuation, impedance matching

Alternative Models

While the DS1267-100 offers unique features, there are alternative models available with similar functionality. Some alternatives include:

  1. MCP401X: Microchip Technology
  2. AD525X: Analog Devices
  3. X9CXXX: Intersil Corporation

These alternative models provide comparable digital potentiometer solutions with varying specifications and package options.

In conclusion, the DS1267-100 is a programmable digital potentiometer that offers precise resistance control through an I2C interface. Its non-volatile memory ensures settings are retained, making it suitable for a wide range of applications. While it has limitations in terms of resistance range and tolerance, alternative models can be considered based on specific requirements.

10 pirs û bersivên hevpar ên têkildarî sepana DS1267-100 di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of DS1267-100 in technical solutions:

  1. Q: What is DS1267-100? A: DS1267-100 is a digital potentiometer IC (integrated circuit) manufactured by Maxim Integrated. It is used for digitally controlling resistance in various electronic circuits.

  2. Q: What are the key features of DS1267-100? A: The key features of DS1267-100 include dual-channel operation, 256-tap resolution, non-volatile memory, low power consumption, and SPI (Serial Peripheral Interface) communication.

  3. Q: How can DS1267-100 be used in technical solutions? A: DS1267-100 can be used in technical solutions where precise resistance adjustment is required, such as audio volume control, motor speed control, LED brightness control, and sensor calibration.

  4. Q: What is the voltage range supported by DS1267-100? A: DS1267-100 supports a wide voltage range from -5V to +5V, making it suitable for both analog and digital applications.

  5. Q: Can DS1267-100 be controlled using microcontrollers or other digital devices? A: Yes, DS1267-100 can be easily controlled using microcontrollers or any other digital device with an SPI interface. It requires only a few digital pins for communication.

  6. Q: Does DS1267-100 have any built-in protection features? A: Yes, DS1267-100 has built-in overvoltage protection, which safeguards the IC from potential damage due to excessive voltage levels.

  7. Q: Is DS1267-100 capable of storing its settings even when powered off? A: Yes, DS1267-100 has non-volatile memory, which means it can retain its settings even when the power is disconnected.

  8. Q: Can DS1267-100 be used in both single-ended and differential applications? A: Yes, DS1267-100 can be used in both single-ended and differential applications, providing flexibility in various circuit designs.

  9. Q: What is the resolution of DS1267-100? A: DS1267-100 has a 256-tap resolution, allowing for precise adjustment of resistance levels.

  10. Q: Are there any application notes or reference designs available for DS1267-100? A: Yes, Maxim Integrated provides application notes and reference designs on their website, which can help users understand and implement DS1267-100 in their technical solutions effectively.

Please note that the answers provided here are general and may vary depending on specific use cases and requirements.