Meixin Integrated
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
MAX9860ETG+T
Binêre Detail DataSheets

MAX9860ETG+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Audio Codec
  • Characteristics: High-performance, low-power consumption
  • Package: 24-pin TQFN (Thin Quad Flat No-Lead)
  • Essence: Provides audio processing and conversion capabilities for various applications
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage: 1.7V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Sampling Rate: Up to 96kHz
  • Number of Channels: 2 (Stereo)
  • Digital Interface: I2C
  • Signal-to-Noise Ratio (SNR): >90dB
  • Total Harmonic Distortion (THD): <0.01%
  • Power Consumption: <10mW

Pin Configuration

The MAX9860ETG+T has a total of 24 pins. The pin configuration is as follows:

  1. VDDIO
  2. GND
  3. SDATA
  4. SCLK
  5. LRCLK
  6. MCLK
  7. MICBIAS
  8. MICIN1P
  9. MICIN1N
  10. MICIN2P
  11. MICIN2N
  12. MICIN3P
  13. MICIN3N
  14. HPOUTL
  15. HPOUTR
  16. SPKOUTL
  17. SPKOUTR
  18. LINEOUTL
  19. LINEOUTR
  20. AUXINL
  21. AUXINR
  22. AGND
  23. DVDD
  24. AVDD

Functional Features

  • Audio signal processing and conversion
  • Programmable gain control for microphone inputs
  • Integrated headphone and speaker amplifiers
  • Automatic level control and noise gating
  • Digital audio filters and equalizers
  • Programmable sample rate and resolution

Advantages and Disadvantages

Advantages: - High-performance audio processing - Low-power consumption - Integrated amplifiers for headphones and speakers - Flexible programmability for various applications

Disadvantages: - Limited number of channels (2 stereo) - Requires external power supply

Working Principles

The MAX9860ETG+T is an audio codec IC that operates by receiving analog audio signals from various sources such as microphones, line inputs, or auxiliary inputs. It then processes and converts these signals into digital format using built-in analog-to-digital converters (ADCs). The digital audio data can be further processed and modified using the integrated digital signal processing (DSP) features.

The processed audio data can be output through different channels such as headphone outputs, speaker outputs, or line outputs. The IC also includes integrated amplifiers to drive headphones and speakers directly. The MAX9860ETG+T can be controlled and configured through the I2C interface, allowing for flexible customization and adjustment of audio parameters.

Detailed Application Field Plans

The MAX9860ETG+T is suitable for a wide range of audio applications, including but not limited to:

  1. Mobile devices: Smartphones, tablets, portable media players
  2. Wearable devices: Smartwatches, fitness trackers, wireless earbuds
  3. Automotive: In-car entertainment systems, hands-free communication
  4. Home audio: Soundbars, wireless speakers, voice-controlled devices
  5. Industrial equipment: Intercom systems, public address systems, audio recording devices

Alternative Models

  1. MAX9867ETG+T: Similar audio codec with additional digital microphone inputs
  2. MAX9866ETG+T: Audio codec with enhanced noise cancellation features
  3. MAX9869ETG+T: Higher-performance audio codec with increased SNR and THD specifications

These alternative models provide similar functionality to the MAX9860ETG+T but may offer additional features or improved performance depending on specific application requirements.

Word count: 410 words

10 pirs û bersivên hevpar ên têkildarî sepana MAX9860ETG+T di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of MAX9860ETG+T in technical solutions:

  1. Q: What is the MAX9860ETG+T? A: The MAX9860ETG+T is an audio codec IC (integrated circuit) designed for use in various audio applications.

  2. Q: What are the key features of the MAX9860ETG+T? A: The key features of the MAX9860ETG+T include a high-performance ADC (analog-to-digital converter), DAC (digital-to-analog converter), microphone preamplifiers, and digital signal processing capabilities.

  3. Q: What are some typical applications of the MAX9860ETG+T? A: The MAX9860ETG+T can be used in applications such as smartphones, tablets, portable media players, gaming consoles, and other consumer electronic devices that require audio processing.

  4. Q: How many microphones can the MAX9860ETG+T support? A: The MAX9860ETG+T supports up to four microphones, making it suitable for applications that require multi-microphone input.

  5. Q: Can the MAX9860ETG+T handle noise cancellation? A: Yes, the MAX9860ETG+T includes built-in algorithms for noise cancellation, making it ideal for applications where clear audio quality is essential.

  6. Q: Does the MAX9860ETG+T support different audio interfaces? A: Yes, the MAX9860ETG+T supports various audio interfaces such as I2S (Inter-IC Sound), TDM (Time-Division Multiplexing), and PDM (Pulse-Density Modulation).

  7. Q: What is the power supply voltage range for the MAX9860ETG+T? A: The MAX9860ETG+T operates with a power supply voltage range of 1.7V to 3.6V, making it suitable for low-power applications.

  8. Q: Can the MAX9860ETG+T be controlled through a microcontroller? A: Yes, the MAX9860ETG+T can be controlled via an I2C (Inter-Integrated Circuit) interface, allowing easy integration with microcontrollers.

  9. Q: Does the MAX9860ETG+T have built-in audio processing features? A: Yes, the MAX9860ETG+T includes various audio processing features such as equalization, filtering, and volume control.

  10. Q: Is the MAX9860ETG+T available in a small package size? A: Yes, the MAX9860ETG+T is available in a compact 24-pin TQFN (Thin Quad Flat No-Lead) package, which is suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the MAX9860ETG+T in different technical solutions.