Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
AT93C86AY6-10YH-1.8-T

AT93C86AY6-10YH-1.8-T

Product Overview

Category

AT93C86AY6-10YH-1.8-T belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used in electronic devices for non-volatile data storage, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The stored data remains even when power is removed.
  • Electrically erasable: Data can be erased and reprogrammed electronically.
  • High density: The chip has a capacity of 8,192 bits (1 kilobyte).
  • Low power consumption: Operates at a voltage of 1.8V.
  • Small form factor: Packaged in a compact surface mount package.

Package

AT93C86AY6-10YH-1.8-T is packaged in a small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to store and retrieve digital information reliably and efficiently.

Packaging/Quantity

These chips are typically sold in reels or tubes containing a quantity of 2500 units per package.

Specifications

  • Memory Capacity: 8,192 bits (1 kilobyte)
  • Operating Voltage: 1.8V
  • Operating Temperature Range: -40°C to +85°C
  • Interface: Serial Peripheral Interface (SPI)
  • Write Time: 5ms (typical)
  • Data Retention: 100 years (minimum)

Detailed Pin Configuration

The AT93C86AY6-10YH-1.8-T chip has a total of 8 pins, which are assigned specific functions:

  1. Chip Select (/CS): Enables communication with the chip when pulled low.
  2. Serial Clock (SCK): Provides the clock signal for data transfer.
  3. Serial Data Input (SI): Used to input data during write operations.
  4. Serial Data Output (SO): Outputs data during read operations.
  5. Write Protect (/WP): When pulled low, prevents write operations.
  6. VCC: Power supply voltage (1.8V).
  7. Ground (GND): Common ground reference.
  8. Hold (/HOLD): Pauses ongoing operations when pulled low.

Functional Features

  • High-speed data transfer: Supports a maximum clock frequency of 10 MHz.
  • Sequential read and write operations: Allows efficient access to consecutive memory locations.
  • Software and hardware protection mechanisms: Ensures data integrity and security.
  • Built-in error detection and correction: Enhances reliability of stored data.
  • Low standby current: Minimizes power consumption during idle periods.

Advantages and Disadvantages

Advantages

  • Compact size and high density make it suitable for space-constrained applications.
  • Electrically erasable nature allows for easy reprogramming.
  • Low power consumption extends battery life in portable devices.
  • High-speed data transfer enables quick access to stored information.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively higher cost per kilobyte compared to larger capacity memory chips.
  • Susceptible to electromagnetic interference (EMI) due to its small form factor.

Working Principles

AT93C86AY6-10YH-1.8-T utilizes EEPROM technology, which is based on floating gate transistors. The chip stores data by trapping electric charge within these transistors. To write data, a high voltage is applied to the control gate, allowing electrons to tunnel through the insulating layer onto the floating gate. Erasing data involves removing the trapped charge from the floating gate using an electrical pulse. During read operations, the presence or absence of charge on the floating gate is detected, determining the stored data.

Detailed Application Field Plans

AT93C86AY6-10YH-1.8-T finds applications in various fields, including: 1. Automotive electronics: Used for storing vehicle configuration data and firmware updates. 2. Industrial control systems: Provides non-volatile memory for storing critical parameters and calibration data. 3. Medical devices: Stores patient information, device settings, and event logs. 4. Consumer electronics: Used in smart TVs, set-top boxes, and gaming consoles for firmware storage and system configuration. 5. Internet of Things (IoT): Enables data logging and configuration storage in IoT devices.

Detailed and Complete Alternative Models

Some alternative models to AT93C86AY6-10YH-1.8-T include: - AT93C66A-10SU-2.7: Similar EEPROM chip with a smaller capacity of 4,096 bits. - AT25SF041-SSHD-T: Serial Flash memory chip with a capacity of 512 kilobits. - CAT24C256WI-GT3: I2C-compatible

10 pirs û bersivên hevpar ên têkildarî sepana AT93C86AY6-10YH-1.8-T di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of AT93C86AY6-10YH-1.8-T in technical solutions:

Q1: What is AT93C86AY6-10YH-1.8-T? A1: AT93C86AY6-10YH-1.8-T is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip.

Q2: What is the storage capacity of AT93C86AY6-10YH-1.8-T? A2: AT93C86AY6-10YH-1.8-T has a storage capacity of 16 kilobits (Kb).

Q3: What voltage does AT93C86AY6-10YH-1.8-T operate at? A3: AT93C86AY6-10YH-1.8-T operates at a voltage of 1.8 volts.

Q4: What are some typical applications of AT93C86AY6-10YH-1.8-T? A4: AT93C86AY6-10YH-1.8-T is commonly used in various technical solutions such as automotive electronics, industrial control systems, consumer electronics, and communication devices.

Q5: How does AT93C86AY6-10YH-1.8-T connect to a microcontroller or other devices? A5: AT93C86AY6-10YH-1.8-T typically connects using a standard serial interface such as SPI (Serial Peripheral Interface) or I2C (Inter-Integrated Circuit).

Q6: Can AT93C86AY6-10YH-1.8-T be reprogrammed multiple times? A6: Yes, AT93C86AY6-10YH-1.8-T is an EEPROM chip, which means it can be electrically erased and reprogrammed multiple times.

Q7: What is the operating temperature range of AT93C86AY6-10YH-1.8-T? A7: AT93C86AY6-10YH-1.8-T has an operating temperature range of -40°C to +85°C.

Q8: Does AT93C86AY6-10YH-1.8-T require any external components for operation? A8: Yes, AT93C86AY6-10YH-1.8-T typically requires a few external components such as decoupling capacitors and pull-up resistors.

Q9: Can AT93C86AY6-10YH-1.8-T retain data without power? A9: Yes, AT93C86AY6-10YH-1.8-T has non-volatile memory, which means it can retain data even when power is removed.

Q10: Is AT93C86AY6-10YH-1.8-T compatible with other similar EEPROM chips? A10: Yes, AT93C86AY6-10YH-1.8-T is compatible with other EEPROM chips that follow the same communication protocols (such as SPI or I2C) and have similar specifications.

Please note that these answers are general and may vary depending on the specific application and requirements.