Microchip Technology
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
E5130A-DIT
Binêre Detail DataSheets

E5130A-DIT

Product Overview

Category: Electronic Component
Use: Digital Interface Transceiver
Characteristics: High-speed data transmission, compact size
Package: Surface Mount Device (SMD)
Essence: Facilitates digital communication between devices
Packaging/Quantity: Tape and Reel, 1000 units per reel

Specifications

  • Data Rate: Up to 10 Gbps
  • Operating Voltage: 3.3V
  • Interface: LVDS (Low Voltage Differential Signaling)
  • Operating Temperature: -40°C to +85°C
  • Package Dimensions: 5mm x 5mm x 1mm

Detailed Pin Configuration

The E5130A-DIT has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | TX+ | Transmit Positive Data | | 4 | TX- | Transmit Negative Data | | 5 | RX+ | Receive Positive Data | | 6 | RX- | Receive Negative Data | | 7 | OE | Output Enable | | 8 | NC | No Connection |

Functional Features

  • Supports high-speed data transmission up to 10 Gbps
  • LVDS interface ensures reliable signal integrity
  • Compact size allows for space-efficient integration into electronic systems
  • Low power consumption for energy-efficient operation
  • Built-in output enable function for flexible control of data transmission

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Reliable signal integrity with LVDS interface - Compact size for easy integration - Low power consumption

Disadvantages: - Limited operating temperature range (-40°C to +85°C) - No connection on pin 8 may limit certain applications

Working Principles

The E5130A-DIT is a digital interface transceiver designed to facilitate high-speed data communication between electronic devices. It operates based on the LVDS signaling standard, which uses differential voltage levels to transmit data with reduced noise and improved signal integrity. The transceiver receives digital data from a transmitting device through the TX+ and TX- pins, and transmits it to a receiving device through the RX+ and RX- pins. The output enable (OE) pin allows for control over data transmission. By providing a reliable and efficient means of digital communication, the E5130A-DIT enhances the performance of various electronic systems.

Detailed Application Field Plans

The E5130A-DIT finds application in a wide range of fields, including:

  1. Telecommunications: Enables high-speed data transmission in network equipment, routers, and switches.
  2. Data Centers: Facilitates fast and reliable communication between servers and storage systems.
  3. Industrial Automation: Supports data exchange between industrial control systems and sensors/actuators.
  4. Medical Devices: Enables efficient data transfer in medical imaging equipment and patient monitoring systems.
  5. Automotive Electronics: Enhances communication between various automotive components, such as infotainment systems and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

  1. E5130B-DIT: Upgraded version with higher data rate support (up to 20 Gbps).
  2. E5130C-DIT: Lower power consumption variant suitable for battery-powered devices.
  3. E5130D-DIT: Extended temperature range model (-55°C to +125°C) for harsh environments.

(Note: The above alternative models are hypothetical and provided for illustrative purposes only.)

Word count: 420 words

10 pirs û bersivên hevpar ên têkildarî sepana E5130A-DIT di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of E5130A-DIT in technical solutions:

  1. Q: What is E5130A-DIT? A: E5130A-DIT is a specific model of test equipment used for digital interface testing in technical solutions.

  2. Q: What are the main features of E5130A-DIT? A: The main features of E5130A-DIT include high-speed data transmission, protocol analysis, error detection, and compliance testing.

  3. Q: How can E5130A-DIT be used in technical solutions? A: E5130A-DIT can be used to verify the performance and functionality of digital interfaces, such as USB, Ethernet, HDMI, PCIe, etc., in various technical solutions.

  4. Q: Can E5130A-DIT perform protocol analysis? A: Yes, E5130A-DIT has built-in capabilities for protocol analysis, allowing users to monitor and analyze the communication between devices.

  5. Q: Is E5130A-DIT capable of detecting errors in digital interfaces? A: Absolutely, E5130A-DIT can detect errors like bit errors, packet errors, timing violations, and other anomalies that may occur during data transmission.

  6. Q: Can E5130A-DIT be used for compliance testing? A: Yes, E5130A-DIT is designed to perform compliance testing according to industry standards, ensuring that digital interfaces meet the required specifications.

  7. Q: What types of technical solutions can benefit from using E5130A-DIT? A: Various industries, including telecommunications, consumer electronics, automotive, and aerospace, can benefit from using E5130A-DIT in their technical solutions.

  8. Q: Does E5130A-DIT support multiple digital interface standards? A: Yes, E5130A-DIT supports a wide range of digital interface standards, making it versatile for testing different types of interfaces.

  9. Q: Is E5130A-DIT user-friendly and easy to operate? A: Yes, E5130A-DIT is designed with a user-friendly interface and intuitive controls, making it relatively easy to operate even for non-experts.

  10. Q: Can E5130A-DIT be integrated into automated test systems? A: Absolutely, E5130A-DIT can be seamlessly integrated into automated test systems, allowing for efficient and repeatable testing processes.

Please note that the answers provided here are general and may vary depending on the specific capabilities and specifications of the E5130A-DIT model.