Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
MCP2562FDT-E/MF

MCP2562FDT-E/MF

Product Overview

Category

The MCP2562FDT-E/MF belongs to the category of integrated circuits (ICs) specifically designed for use in automotive applications.

Use

This product is primarily used as a CAN (Controller Area Network) transceiver. It enables communication between microcontrollers and other devices within an automotive network.

Characteristics

  • High-speed CAN transceiver
  • Supports data rates up to 1 Mbps
  • Compliant with ISO11898-2 standard
  • Low standby current consumption
  • Wide operating voltage range: 4.5V to 5.5V
  • ESD protection on bus pins
  • Available in a small form factor package

Package

The MCP2562FDT-E/MF is available in a 14-pin TSSOP (Thin Shrink Small Outline Package) package.

Essence

The essence of this product lies in its ability to provide reliable and efficient communication between various components in an automotive network, ensuring seamless operation of the system.

Packaging/Quantity

The MCP2562FDT-E/MF is typically packaged in reels containing 2,500 units per reel.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +125°C
  • Data Rate: Up to 1 Mbps
  • Standby Current: 5 µA (typical)
  • Transmitting Output Voltage: 0 to VDD
  • Receiving Input Voltage: -12V to +12V
  • ESD Protection: ±8 kV (HBM)

Detailed Pin Configuration

The MCP2562FDT-E/MF has a total of 14 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. TXD - Transmit data output
  4. RXD - Receive data input
  5. VREF - Reference voltage for CAN bus
  6. RS - Slope control input
  7. CS - Standby mode control input
  8. STBY - Standby mode output
  9. CANL - CAN low-level input/output
  10. CANH - CAN high-level input/output
  11. SPLIT - Split termination resistor control input
  12. NC - No connection
  13. NC - No connection
  14. VDD - Power supply voltage

Functional Features

  • High-speed transmission: The MCP2562FDT-E/MF supports data rates up to 1 Mbps, allowing for fast and efficient communication within the automotive network.
  • ESD protection: The integrated ESD protection on the bus pins ensures robustness against electrostatic discharge, enhancing the reliability of the system.
  • Low standby current consumption: With a standby current of only 5 µA, this transceiver minimizes power consumption when not actively transmitting or receiving data.
  • Wide operating voltage range: The MCP2562FDT-E/MF can operate within a wide voltage range of 4.5V to 5.5V, accommodating various automotive power systems.

Advantages and Disadvantages

Advantages

  • High-speed data transmission capability
  • Robust ESD protection
  • Low power consumption in standby mode
  • Wide operating voltage range

Disadvantages

  • Limited to automotive applications
  • Requires additional components for complete system integration

Working Principles

The MCP2562FDT-E/MF operates based on the principles of the Controller Area Network (CAN) protocol. It uses differential signaling to transmit and receive data over the CAN bus. The transceiver converts the digital signals from the microcontroller into differential voltages suitable for transmission on the bus. It also receives differential signals from the bus and converts them into digital signals for the microcontroller to process.

Detailed Application Field Plans

The MCP2562FDT-E/MF is widely used in various automotive applications, including:

  1. Automotive control systems: It enables communication between different control units within a vehicle, such as engine control modules, transmission control modules, and body control modules.
  2. Vehicle diagnostics: The transceiver facilitates diagnostic communication between the vehicle's onboard diagnostic system and external diagnostic tools.
  3. Infotainment systems: It allows for seamless communication between infotainment modules, such as audio systems, navigation systems, and display units.
  4. Advanced driver-assistance systems (ADAS): The MCP2562FDT-E/MF plays a crucial role in enabling communication between ADAS components, including sensors, cameras, and control units.

Detailed and Complete Alternative Models

  1. SN65HVD230DR - High-Speed CAN Transceiver
  2. TJA1050T/VM - Standalone CAN Transceiver
  3. PCA82C251T/YM - Fault-Tolerant CAN Transceiver
  4. ISO1050DUBR - Isolated

10 pirs û bersivên hevpar ên têkildarî sepana MCP2562FDT-E/MF di çareseriyên teknîkî de navnîş bikin

  1. Question: What is the maximum data rate supported by MCP2562FDT-E/MF?
    Answer: The maximum data rate supported by MCP2562FDT-E/MF is 1 Mbps.

  2. Question: Can MCP2562FDT-E/MF be used in automotive applications?
    Answer: Yes, MCP2562FDT-E/MF is suitable for automotive applications as it meets AEC-Q100 standards.

  3. Question: What is the operating voltage range of MCP2562FDT-E/MF?
    Answer: The operating voltage range of MCP2562FDT-E/MF is 4.5V to 5.5V.

  4. Question: Does MCP2562FDT-E/MF support CAN FD (Flexible Data-Rate)?
    Answer: Yes, MCP2562FDT-E/MF supports CAN FD for higher data transfer rates.

  5. Question: Is MCP2562FDT-E/MF compatible with microcontrollers and microprocessors?
    Answer: Yes, MCP2562FDT-E/MF is compatible with a wide range of microcontrollers and microprocessors.

  6. Question: What is the typical standby current consumption of MCP2562FDT-E/MF?
    Answer: The typical standby current consumption of MCP2562FDT-E/MF is 10 µA.

  7. Question: Can MCP2562FDT-E/MF withstand harsh industrial environments?
    Answer: Yes, MCP2562FDT-E/MF is designed to operate reliably in harsh industrial environments.

  8. Question: Does MCP2562FDT-E/MF have built-in protection features?
    Answer: Yes, MCP2562FDT-E/MF includes built-in thermal shutdown and short-circuit protection.

  9. Question: What is the package type of MCP2562FDT-E/MF?
    Answer: MCP2562FDT-E/MF is available in a small footprint SOIC-8 package.

  10. Question: Are there any application notes or reference designs available for MCP2562FDT-E/MF?
    Answer: Yes, Microchip provides comprehensive application notes and reference designs for integrating MCP2562FDT-E/MF into technical solutions.