Microchip Technology
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
MCP6283-E/MS
Binêre Detail DataSheets

MCP6283-E/MS

Product Overview

Category

The MCP6283-E/MS belongs to the category of operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits where amplification and signal conditioning are required.

Characteristics

  • Low power consumption
  • Rail-to-rail input/output capability
  • Wide bandwidth
  • High slew rate
  • Low input offset voltage
  • Small package size

Package

The MCP6283-E/MS is available in a small MSOP-8 package.

Essence

The essence of this product lies in its ability to provide high-performance amplification while consuming minimal power.

Packaging/Quantity

The MCP6283-E/MS is typically packaged in reels, with 2500 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±1.5mV (maximum)
  • Input Bias Current: ±10nA (maximum)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 6V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MCP6283-E/MS has a total of 8 pins, which are as follows:

  1. Vout1: Output 1
  2. V+ (Vcc): Positive Power Supply
  3. Vin+: Non-Inverting Input
  4. Vin-: Inverting Input
  5. Vout2: Output 2
  6. NC: No Connection
  7. V- (Vee): Negative Power Supply
  8. NC: No Connection

Functional Features

  • Rail-to-rail input/output capability allows for maximum utilization of the supply voltage range.
  • Low input offset voltage ensures accurate amplification of small signals.
  • Wide bandwidth enables the amplification of high-frequency signals.
  • High slew rate allows for fast response to input signal changes.

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications.
  • Rail-to-rail capability provides flexibility in signal range.
  • Small package size saves board space.
  • Wide bandwidth and high slew rate make it suitable for audio and high-speed applications.

Disadvantages

  • Limited supply voltage range compared to some other op-amps.
  • Higher input offset voltage compared to precision op-amps.

Working Principles

The MCP6283-E/MS operates based on the principles of operational amplifiers. It amplifies the difference between the voltages at its non-inverting and inverting inputs, providing a higher output voltage. The rail-to-rail input/output capability ensures that the amplified signal remains within the supply voltage range.

Detailed Application Field Plans

The MCP6283-E/MS finds applications in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Battery-powered devices 4. Active filters 5. Data acquisition systems

Detailed and Complete Alternative Models

Some alternative models to the MCP6283-E/MS include: 1. MCP6002 2. LM358 3. TL072 4. AD822

These alternatives offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 410 words

10 pirs û bersivên hevpar ên têkildarî sepana MCP6283-E/MS di çareseriyên teknîkî de navnîş bikin

  1. What is the supply voltage range for MCP6283-E/MS?
    - The supply voltage range for MCP6283-E/MS is 1.8V to 5.5V.

  2. What is the typical input offset voltage of MCP6283-E/MS?
    - The typical input offset voltage of MCP6283-E/MS is 150µV.

  3. Can MCP6283-E/MS operate in single-supply voltage applications?
    - Yes, MCP6283-E/MS can operate in single-supply voltage applications.

  4. What is the maximum input bias current of MCP6283-E/MS?
    - The maximum input bias current of MCP6283-E/MS is 1pA.

  5. Is MCP6283-E/MS suitable for low-power applications?
    - Yes, MCP6283-E/MS is suitable for low-power applications with a quiescent current of 100µA.

  6. What is the gain bandwidth product of MCP6283-E/MS?
    - The gain bandwidth product of MCP6283-E/MS is 10MHz.

  7. Can MCP6283-E/MS be used in temperature-critical environments?
    - Yes, MCP6283-E/MS has a wide operating temperature range of -40°C to 125°C.

  8. Does MCP6283-E/MS have built-in EMI filtering?
    - Yes, MCP6283-E/MS features built-in EMI filtering for improved electromagnetic compatibility.

  9. What is the package type of MCP6283-E/MS?
    - MCP6283-E/MS is available in a standard MSOP-8 package.

  10. Is MCP6283-E/MS RoHS compliant?
    - Yes, MCP6283-E/MS is RoHS compliant, making it suitable for environmentally conscious designs.