MCP9803-M/SNG
1. Product Overview
Category:
The MCP9803-M/SNG belongs to the category of temperature sensors.
Use:
It is used for accurately measuring temperature in various electronic devices and systems.
Characteristics:
- High accuracy
- Low power consumption
- Small form factor
Package:
The MCP9803-M/SNG comes in a small surface-mount package.
Essence:
The essence of this product lies in its precise temperature measurement capabilities and compact design.
Packaging/Quantity:
The MCP9803-M/SNG is typically packaged in reels with a quantity of 3000 units per reel.
2. Specifications
- Temperature Range: -40°C to +125°C
- Accuracy: ±0.5°C (typical) from -10°C to +85°C
- Supply Voltage: 2.7V to 5.5V
- Resolution: Configurable to 9, 10, 11, or 12 bits
3. Detailed Pin Configuration
The MCP9803-M/SNG has a total of 6 pins: 1. VDD - Power supply input 2. GND - Ground 3. SCL - Serial clock input 4. SDA - Serial data input/output 5. A0 - Address selection input 6. ALERT - Open-drain output
4. Functional Features
- I2C Interface for communication
- Programmable temperature limits
- Shutdown mode for low-power operation
5. Advantages and Disadvantages
Advantages:
- High accuracy over a wide temperature range
- Low power consumption
- Small form factor
Disadvantages:
- Limited to I2C interface for communication
- Higher cost compared to some other temperature sensors
6. Working Principles
The MCP9803-M/SNG utilizes a built-in temperature sensor to measure the ambient temperature. It communicates the temperature readings through the I2C interface to the host system.
7. Detailed Application Field Plans
The MCP9803-M/SNG is suitable for various applications including: - Consumer electronics - Industrial automation - Automotive systems - Medical devices
8. Detailed and Complete Alternative Models
Some alternative models to the MCP9803-M/SNG include: - TMP102 - LM75 - DS18B20
In conclusion, the MCP9803-M/SNG is a highly accurate and compact temperature sensor suitable for a wide range of applications. Its I2C interface and programmable features make it a versatile choice for temperature measurement in electronic systems.
Word Count: 366
10 pirs û bersivên hevpar ên têkildarî sepana MCP9803-M/SNG di çareseriyên teknîkî de navnîş bikin
Sure, here are 10 common questions and answers related to the application of MCP9803-M/SNG:
Q: What is the operating voltage range of MCP9803-M/SNG? A: The operating voltage range is 2.7V to 5.5V.
Q: What is the temperature accuracy of MCP9803-M/SNG? A: The temperature accuracy is ±0.25°C typical (±0.5°C maximum) from -40°C to +125°C.
Q: Can MCP9803-M/SNG be used in battery-powered applications? A: Yes, it can operate within a wide voltage range, making it suitable for battery-powered applications.
Q: Does MCP9803-M/SNG support I2C communication? A: Yes, it supports I2C communication interface.
Q: What is the resolution of MCP9803-M/SNG? A: It has a resolution of 9 to 12 bits, selectable by the user.
Q: Is MCP9803-M/SNG suitable for industrial temperature monitoring? A: Yes, it is suitable for industrial temperature monitoring due to its wide temperature range and high accuracy.
Q: Can MCP9803-M/SNG be used in medical devices? A: Yes, it can be used in medical devices where precise temperature monitoring is required.
Q: What is the power consumption of MCP9803-M/SNG? A: The shutdown current is 0.1 µA (typical), and the active current is 200 µA (maximum).
Q: Does MCP9803-M/SNG have programmable temperature limits? A: Yes, it has programmable temperature limits with an alert output.
Q: Is MCP9803-M/SNG RoHS compliant? A: Yes, it is RoHS compliant, making it suitable for use in environmentally sensitive applications.
I hope these questions and answers are helpful for your technical solutions! If you need further information on any specific question, feel free to ask.