Microchip Technology
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
MIC2586-2BM
Binêre Detail DataSheets

MIC2586-2BM

Product Overview

Category

MIC2586-2BM belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management and control.

Characteristics

  • Integrated circuit
  • Power management and control functionality
  • Small form factor
  • High efficiency
  • Low power consumption

Package

MIC2586-2BM is available in a compact package, suitable for surface mount technology (SMT) applications.

Essence

The essence of MIC2586-2BM lies in its ability to efficiently manage and control power in electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

MIC2586-2BM is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input voltage range: 4.5V to 28V
  • Output voltage range: 0.8V to 5.5V
  • Maximum output current: 3A
  • Operating temperature range: -40°C to +85°C
  • Switching frequency: 500kHz

Detailed Pin Configuration

MIC2586-2BM features a 16-pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. VCC: Supply voltage
  4. EN: Enable pin
  5. FB: Feedback pin
  6. SS: Soft-start pin
  7. PGND: Power ground
  8. SW: Switch node
  9. SW: Switch node
  10. SW: Switch node
  11. SW: Switch node
  12. COMP: Compensation pin
  13. VCC: Supply voltage
  14. VCC: Supply voltage
  15. VCC: Supply voltage
  16. VCC: Supply voltage

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency power conversion
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start functionality for smooth power-up

Advantages and Disadvantages

Advantages

  • Compact size
  • High efficiency
  • Wide input voltage range
  • Overcurrent and thermal protection

Disadvantages

  • Limited output current capacity (3A maximum)

Working Principles

MIC2586-2BM operates on the principle of pulse width modulation (PWM) to regulate the output voltage. It uses an internal oscillator to generate a high-frequency switching signal, which controls the power transistor to deliver the desired output voltage.

Detailed Application Field Plans

MIC2586-2BM finds applications in various electronic devices, including but not limited to: - Power supplies - Battery chargers - LED lighting systems - Industrial automation equipment - Consumer electronics

Detailed and Complete Alternative Models

  1. MIC2585-2BM: Similar specifications and features, with a lower output current capacity of 2A.
  2. MIC2590-2BM: Higher output current capacity of 5A, suitable for applications requiring higher power levels.
  3. MIC2579-2BM: Lower cost alternative with slightly reduced efficiency and input/output voltage ranges.

In conclusion, MIC2586-2BM is a versatile integrated circuit used for power management and control in various electronic devices. Its compact size, high efficiency, and wide input voltage range make it a popular choice among designers. However, its limited output current capacity may restrict its use in high-power applications.

10 pirs û bersivên hevpar ên têkildarî sepana MIC2586-2BM di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of MIC2586-2BM in technical solutions:

  1. Q: What is MIC2586-2BM? A: MIC2586-2BM is a high-performance, dual-channel MOSFET driver IC designed for driving N-channel enhancement-mode MOSFETs in various applications.

  2. Q: What is the maximum voltage rating of MIC2586-2BM? A: The maximum voltage rating of MIC2586-2BM is typically around 40V.

  3. Q: What is the maximum current capability of MIC2586-2BM? A: MIC2586-2BM can typically source/sink up to 4A of peak current per channel.

  4. Q: Can MIC2586-2BM be used with both low-side and high-side MOSFETs? A: Yes, MIC2586-2BM can be used with both low-side and high-side MOSFETs, making it suitable for various power switching applications.

  5. Q: Does MIC2586-2BM have built-in protection features? A: Yes, MIC2586-2BM includes various protection features like thermal shutdown, under-voltage lockout (UVLO), and shoot-through protection.

  6. Q: What is the operating temperature range of MIC2586-2BM? A: MIC2586-2BM is typically rated for an operating temperature range of -40°C to +125°C.

  7. Q: Can MIC2586-2BM operate at high frequencies? A: Yes, MIC2586-2BM is designed to operate at high frequencies, making it suitable for applications that require fast switching speeds.

  8. Q: Is MIC2586-2BM compatible with both 3.3V and 5V logic levels? A: Yes, MIC2586-2BM is compatible with both 3.3V and 5V logic levels, providing flexibility in interfacing with different microcontrollers or control circuits.

  9. Q: Can MIC2586-2BM be used in automotive applications? A: Yes, MIC2586-2BM is suitable for automotive applications as it meets the necessary automotive-grade requirements.

  10. Q: Are there any application notes or reference designs available for MIC2586-2BM? A: Yes, the manufacturer of MIC2586-2BM typically provides application notes and reference designs to help users understand and implement the IC in their technical solutions.

Please note that the specific details and answers may vary depending on the manufacturer's datasheet and application notes for MIC2586-2BM.