Microsemi Corporation
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
MPLAD15KP26A
Binêre Detail DataSheets

MPLAD15KP26A

Product Overview

Category

The MPLAD15KP26A belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Characteristics

  • High surge capability
  • Low clamping voltage
  • Fast response time
  • RoHS compliant

Package

The MPLAD15KP26A is available in a DO-203AB package.

Essence

The essence of MPLAD15KP26A lies in its ability to provide robust protection against transient voltage events, thereby safeguarding electronic circuits and components.

Packaging/Quantity

The MPLAD15KP26A is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Peak Pulse Power: 15000W
  • Standoff Voltage: 26V
  • Breakdown Voltage: 28.9V
  • Maximum Clamping Voltage: 43.6V
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The MPLAD15KP26A features a standard DO-203AB package with two leads. The pin configuration is as follows: 1. Anode 2. Cathode

Functional Features

  • High surge capability for reliable overvoltage protection
  • Fast response time to minimize the risk of damage to sensitive components
  • Low clamping voltage to limit the voltage excursion during transient events

Advantages and Disadvantages

Advantages

  • Robust protection against transient voltage events
  • Wide operating temperature range
  • RoHS compliance for environmental sustainability

Disadvantages

  • Higher cost compared to traditional diode-based protection methods
  • Requires careful consideration of placement and layout for optimal performance

Working Principles

The MPLAD15KP26A operates based on the principle of avalanche breakdown, where it rapidly conducts excess current away from the protected circuit when a transient voltage event occurs. This action limits the voltage across the protected components, preventing damage.

Detailed Application Field Plans

The MPLAD15KP26A is widely used in various applications, including: - Telecommunication equipment - Industrial automation systems - Power supplies - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to MPLAD15KP26A include: - MPLAD15KP30A - MPLAD15KP36A - MPLAD15KP48A

In summary, the MPLAD15KP26A transient voltage suppressor diode offers robust protection against transient voltage events, making it an essential component in various electronic systems.

Word Count: 410

10 pirs û bersivên hevpar ên têkildarî sepana MPLAD15KP26A di çareseriyên teknîkî de navnîş bikin

Sure, here are 10 common questions and answers related to the application of MPLAD15KP26A in technical solutions:

  1. What is the maximum peak pulse power dissipation of MPLAD15KP26A?

    • The maximum peak pulse power dissipation of MPLAD15KP26A is 15000W for a 10/1000μs waveform.

  2. What is the breakdown voltage of MPLAD15KP26A?

    • The breakdown voltage of MPLAD15KP26A is 26V.

  3. What is the typical clamping voltage of MPLAD15KP26A?

    • The typical clamping voltage of MPLAD15KP26A is 42.1V at 100A.

  4. What is the maximum junction temperature of MPLAD15KP26A?

    • The maximum junction temperature of MPLAD15KP26A is 150°C.

  5. What is the reverse stand-off voltage of MPLAD15KP26A?

    • The reverse stand-off voltage of MPLAD15KP26A is 23.6V.

  6. What is the peak pulse current rating of MPLAD15KP26A?

    • The peak pulse current rating of MPLAD15KP26A is 484A for a 10/1000μs waveform.

  7. What are the typical applications of MPLAD15KP26A?

    • MPLAD15KP26A is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial control systems, and automotive electronics.

  8. What is the response time of MPLAD15KP26A?

    • The response time of MPLAD15KP26A is typically less than 1.0 nanosecond.

  9. Does MPLAD15KP26A meet industry standards for surge protection?

    • Yes, MPLAD15KP26A meets the requirements of various industry standards, including IEC 61000-4-5 for surge immunity testing.

  10. Can MPLAD15KP26A be used in high-reliability applications?

    • Yes, MPLAD15KP26A is designed for high-reliability applications and is suitable for use in critical systems where surge protection is essential.