Monolithic Power Systems Inc.
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
MPQ2315GJ-P
Binêre Detail DataSheets

MPQ2315GJ-P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SOP-8 (Small Outline Package)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 24V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MPQ2315GJ-P has a SOP-8 package with the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. COMP: Compensation Pin
  6. SS/TR: Soft Start/Tracking Pin
  7. LX: Switch Node
  8. VOUT: Output Voltage

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency design minimizes power loss.
  • Low power consumption in standby mode.
  • Adjustable output voltage provides flexibility.
  • Overcurrent and thermal protection ensure safe operation.

Advantages

  • Compact SOP-8 package saves board space.
  • High efficiency reduces energy waste.
  • Wide input voltage range accommodates various power sources.
  • Adjustable output voltage suits different requirements.
  • Overcurrent and thermal protection enhance reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Requires external components for proper operation.

Working Principles

The MPQ2315GJ-P is a voltage regulator IC that utilizes a switching regulator topology. It converts the input voltage to a regulated output voltage by rapidly switching the input voltage on and off. This switching action allows for efficient power conversion with minimal power loss.

The IC incorporates a feedback mechanism that continuously monitors the output voltage and adjusts the duty cycle of the switching signal to maintain a stable output voltage. The compensation pin is used to fine-tune the control loop and ensure stability.

Detailed Application Field Plans

The MPQ2315GJ-P is commonly used in various applications, including:

  1. Power supplies for industrial equipment
  2. Battery-powered devices
  3. LED lighting systems
  4. Automotive electronics
  5. Telecommunications equipment

Its wide input voltage range, high efficiency, and compact package make it suitable for a wide range of power management applications.

Detailed and Complete Alternative Models

  • MPQ2300GJ-P: Similar specifications, lower maximum output current (2A)
  • MPQ2320GJ-P: Similar specifications, higher maximum output current (4A)
  • MPQ2340GJ-P: Similar specifications, higher maximum output current (6A)
  • MPQ2360GJ-P: Similar specifications, higher maximum output current (8A)

These alternative models offer different maximum output currents to cater to specific power requirements.

Word count: 345 words

10 pirs û bersivên hevpar ên têkildarî sepana MPQ2315GJ-P di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of MPQ2315GJ-P in technical solutions:

  1. Question: What is MPQ2315GJ-P?
    Answer: MPQ2315GJ-P is a voltage regulator IC (integrated circuit) that can be used in various technical solutions.

  2. Question: What is the input voltage range for MPQ2315GJ-P?
    Answer: The input voltage range for MPQ2315GJ-P is typically between 4.5V and 28V.

  3. Question: What is the output voltage range for MPQ2315GJ-P?
    Answer: The output voltage range for MPQ2315GJ-P can be adjusted from 0.8V to 24V.

  4. Question: What is the maximum output current of MPQ2315GJ-P?
    Answer: The maximum output current of MPQ2315GJ-P is typically around 3A.

  5. Question: Can MPQ2315GJ-P be used in battery-powered applications?
    Answer: Yes, MPQ2315GJ-P can be used in battery-powered applications as long as the input voltage falls within its specified range.

  6. Question: Does MPQ2315GJ-P have built-in protection features?
    Answer: Yes, MPQ2315GJ-P has built-in protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  7. Question: Can MPQ2315GJ-P be used in automotive applications?
    Answer: Yes, MPQ2315GJ-P is suitable for automotive applications as it can handle the required voltage and current levels.

  8. Question: Is MPQ2315GJ-P easy to integrate into existing circuits?
    Answer: Yes, MPQ2315GJ-P is available in a compact package and can be easily integrated into existing circuits.

  9. Question: Can MPQ2315GJ-P operate in a wide temperature range?
    Answer: Yes, MPQ2315GJ-P is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  10. Question: Are there any application notes or reference designs available for MPQ2315GJ-P?
    Answer: Yes, the manufacturer of MPQ2315GJ-P provides application notes and reference designs that can help with its implementation in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for MPQ2315GJ-P.