TJA1080TS,118 - English Editing Encyclopedia Entry
Product Overview
Category
The TJA1080TS,118 belongs to the category of automotive transceivers.
Use
This product is primarily used for communication in automotive applications, specifically in the field of in-vehicle networking.
Characteristics
- Robust and reliable communication capabilities
- High-speed data transmission
- Low power consumption
- Designed for use in harsh automotive environments
Package
The TJA1080TS,118 comes in a small package, suitable for integration into automotive electronic systems.
Essence
The essence of the TJA1080TS,118 lies in its ability to facilitate efficient and secure communication between various electronic components within a vehicle.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Supply voltage: 3.3 V
- Data rate: Up to 1 Mbps
- Operating temperature range: -40°C to +125°C
- ESD protection: ±8 kV HBM (Human Body Model)
- Current consumption: 5 mA (typical)
Detailed Pin Configuration
The TJA1080TS,118 has the following pin configuration:
- VBAT - Battery supply voltage
- CANH - CAN high-level input/output
- CANL - CAN low-level input/output
- GND - Ground
- STB - Standby mode control
- TXD - Transmit data input
- RXD - Receive data output
- VCC - Digital supply voltage
Functional Features
- High-speed CAN communication
- Wake-up capability from standby mode
- Error detection and fault confinement mechanisms
- Bus failure diagnostics
- Thermal protection
Advantages and Disadvantages
Advantages
- Robust communication in automotive environments
- Low power consumption
- High-speed data transmission
- Comprehensive fault detection and diagnostics
Disadvantages
- Limited compatibility with non-automotive applications
- Relatively higher cost compared to standard transceivers
Working Principles
The TJA1080TS,118 operates based on the Controller Area Network (CAN) protocol. It enables reliable communication by transmitting and receiving data frames over a differential bus. The transceiver ensures signal integrity, error detection, and fault confinement, contributing to the overall robustness of the network.
Detailed Application Field Plans
The TJA1080TS,118 is widely used in various automotive applications, including:
- Automotive body control modules
- Powertrain systems
- Infotainment systems
- Advanced driver-assistance systems (ADAS)
- Telematics and connectivity modules
Detailed and Complete Alternative Models
- TJA1040 - Standard CAN transceiver with similar features
- TJA1050 - High-speed CAN transceiver with extended temperature range
- TJA1041 - Low-power CAN transceiver for battery-operated applications
These alternative models offer different specifications and features, allowing users to choose the most suitable option for their specific requirements.
In conclusion, the TJA1080TS,118 is an automotive transceiver that provides robust and reliable communication capabilities within vehicles. With its high-speed data transmission, low power consumption, and comprehensive fault detection mechanisms, it is well-suited for various automotive applications.
10 pirs û bersivên hevpar ên têkildarî sepana TJA1080TS,118 di çareseriyên teknîkî de navnîş bikin
Sure! Here are 10 common questions and answers related to the application of TJA1080TS,118 in technical solutions:
Q: What is TJA1080TS,118? A: TJA1080TS,118 is a high-speed CAN transceiver designed for automotive applications.
Q: What is the maximum data rate supported by TJA1080TS,118? A: TJA1080TS,118 supports a maximum data rate of 5 Mbps.
Q: Can TJA1080TS,118 be used in harsh automotive environments? A: Yes, TJA1080TS,118 is specifically designed to operate reliably in harsh automotive environments.
Q: What is the supply voltage range for TJA1080TS,118? A: The supply voltage range for TJA1080TS,118 is typically between 4.5V and 5.5V.
Q: Does TJA1080TS,118 support wake-up functionality? A: Yes, TJA1080TS,118 supports wake-up functionality, allowing it to wake up from low-power modes upon receiving specific messages.
Q: Can TJA1080TS,118 be used in a multi-node CAN network? A: Yes, TJA1080TS,118 can be used in a multi-node CAN network, supporting both single and multiple transceiver configurations.
Q: Is TJA1080TS,118 compatible with other CAN transceivers? A: Yes, TJA1080TS,118 is fully compatible with other CAN transceivers that comply with the ISO 11898-2 standard.
Q: What is the operating temperature range for TJA1080TS,118? A: TJA1080TS,118 has an operating temperature range of -40°C to +125°C.
Q: Does TJA1080TS,118 have built-in protection features? A: Yes, TJA1080TS,118 includes built-in protection features such as thermal shutdown and short-circuit protection.
Q: Can TJA1080TS,118 be used in non-automotive applications? A: While TJA1080TS,118 is primarily designed for automotive applications, it can also be used in other industrial and communication systems that require high-speed CAN communication.
Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.