ON Semiconductor
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
FAN4810MX
Binêre Detail DataSheets

FAN4810MX

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Voltage Mode PWM Controller
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 8V to 20V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 10A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The FAN4810MX has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. COMP: Compensation pin for feedback control loop
  4. FB: Feedback voltage input
  5. CS: Current sense input
  6. SS/TR: Soft-start and shutdown control
  7. RT/CT: Timing components connection
  8. OUT: Power output

Functional Features

  • Voltage mode control with adjustable output voltage
  • Overcurrent protection with adjustable current limit
  • Soft-start and shutdown control for smooth power-up and power-down
  • Error amplifier with compensation for stable feedback loop
  • Adjustable switching frequency for optimization
  • Under-voltage lockout (UVLO) protection

Advantages and Disadvantages

Advantages: - High efficiency resulting in reduced power consumption - Wide input and output voltage range for versatile applications - Compact SMT package for space-constrained designs - Adjustable features for customization and optimization

Disadvantages: - Limited maximum output current of 10A - Requires external timing components for operation

Working Principles

The FAN4810MX is a voltage mode PWM controller that regulates the output voltage by adjusting the duty cycle of a pulse-width modulated signal. It utilizes an error amplifier to compare the feedback voltage with a reference voltage and adjusts the duty cycle accordingly. The adjustable switching frequency allows for optimization based on specific application requirements. The soft-start and shutdown control ensures smooth power-up and power-down sequences, reducing stress on the system components.

Detailed Application Field Plans

The FAN4810MX is commonly used in various power management applications, including but not limited to: - DC-DC converters - Voltage regulators - Power supplies - Battery chargers

Its wide input and output voltage range make it suitable for a diverse range of applications, from consumer electronics to industrial equipment.

Detailed and Complete Alternative Models

  1. FAN4800: Similar voltage mode PWM controller with lower maximum output current (5A).
  2. FAN4820: Upgraded version with higher maximum output current (15A) and additional protection features.
  3. FAN4830: Voltage mode PWM controller with integrated MOSFET drivers for higher power applications.

These alternative models offer different specifications and features to cater to specific design requirements.

Word count: 314 words

10 pirs û bersivên hevpar ên têkildarî sepana FAN4810MX di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of FAN4810MX in technical solutions:

  1. Q: What is FAN4810MX? A: FAN4810MX is a high-performance, integrated pulse-width modulation (PWM) controller designed for offline and DC-DC converter applications.

  2. Q: What are the key features of FAN4810MX? A: The key features of FAN4810MX include adjustable frequency operation, soft-start function, overvoltage protection, cycle-by-cycle current limiting, and low standby power consumption.

  3. Q: What is the typical input voltage range for FAN4810MX? A: The typical input voltage range for FAN4810MX is between 8V and 30V.

  4. Q: Can FAN4810MX be used in both AC-DC and DC-DC converter applications? A: Yes, FAN4810MX can be used in both AC-DC and DC-DC converter applications.

  5. Q: What is the maximum operating frequency of FAN4810MX? A: The maximum operating frequency of FAN4810MX is typically 500kHz.

  6. Q: Does FAN4810MX have built-in protection features? A: Yes, FAN4810MX has built-in protection features such as overvoltage protection and cycle-by-cycle current limiting.

  7. Q: Can FAN4810MX operate in a wide temperature range? A: Yes, FAN4810MX is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  8. Q: Is FAN4810MX suitable for high-power applications? A: Yes, FAN4810MX is suitable for high-power applications as it can handle high input voltages and has robust protection features.

  9. Q: Can FAN4810MX be used in battery-powered applications? A: Yes, FAN4810MX can be used in battery-powered applications as long as the input voltage range is within its specifications.

  10. Q: Are there any application notes or reference designs available for FAN4810MX? A: Yes, the manufacturer of FAN4810MX provides application notes and reference designs that can help with the implementation of the controller in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.