ON Semiconductor
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
NCP1014ST100T3
Binêre Detail DataSheets

NCP1014ST100T3 - English Editing Encyclopedia Entry

Product Overview

Category

NCP1014ST100T3 belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is commonly used in various power supply designs, including offline flyback converters and low-power battery chargers.

Characteristics

  • The NCP1014ST100T3 offers high efficiency and excellent performance in power management applications.
  • It operates at a fixed frequency and provides precise regulation of output voltage.
  • This IC incorporates various protection features such as overvoltage, overcurrent, and thermal shutdown.
  • It is designed to operate in a wide input voltage range, making it suitable for different power supply applications.

Package

The NCP1014ST100T3 is available in a small surface-mount package, typically a TO-220 style package. This package ensures easy integration into various circuit designs.

Essence

The essence of NCP1014ST100T3 lies in its ability to efficiently regulate and control power supply voltages, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity

The NCP1014ST100T3 is usually packaged in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 85V to 265V AC
  • Output Voltage: Adjustable, typically 5V to 24V DC
  • Maximum Output Current: 100mA
  • Operating Frequency: Fixed, typically 100kHz
  • Protection Features: Overvoltage, Overcurrent, Thermal Shutdown
  • Package Type: TO-220

Detailed Pin Configuration

The NCP1014ST100T3 has a standard pin configuration with the following pin assignments:

  1. VCC: Power supply input pin
  2. GND: Ground reference pin
  3. FB: Feedback pin for voltage regulation
  4. COMP: Compensation pin for stability control
  5. CS: Current sense pin for overcurrent protection
  6. DRAIN: Power switch drain pin
  7. SOURCE: Power switch source pin

Functional Features

  • Precise voltage regulation ensures stable output voltage under varying load conditions.
  • Fixed frequency operation simplifies circuit design and reduces external component count.
  • Overvoltage protection prevents damage to the connected devices during fault conditions.
  • Overcurrent protection safeguards against excessive current flow, preventing component failure.
  • Thermal shutdown feature protects the IC from overheating, enhancing its reliability.

Advantages and Disadvantages

Advantages

  • High efficiency and excellent performance in power management applications.
  • Wide input voltage range allows for versatile use in different power supply designs.
  • Compact TO-220 package enables easy integration into various circuit layouts.
  • Incorporates multiple protection features for enhanced system reliability.

Disadvantages

  • Limited maximum output current of 100mA may not be suitable for high-power applications.
  • Fixed operating frequency may not be adjustable for specific design requirements.

Working Principles

The NCP1014ST100T3 operates based on a flyback converter topology. It utilizes a power switch and a transformer to convert the input voltage to the desired output voltage. The IC controls the power switch's switching frequency and duty cycle to regulate the output voltage accurately. Feedback from the output voltage is continuously monitored and compared to a reference voltage, ensuring precise regulation.

Detailed Application Field Plans

The NCP1014ST100T3 finds extensive application in various low-power electronic devices, including: - Battery chargers for portable electronics - LED lighting systems - Standby power supplies - Home appliances - Industrial control systems

Detailed and Complete Alternative Models

  1. NCP1014AP065G: Similar to NCP1014ST100T3 but with a different package type (DIP-7).
  2. NCP1014ST65T3G: Lower maximum output current (65mA) but otherwise similar specifications.
  3. NCP1014ST50T3G: Lower maximum output current (50mA) and different package type (SOT-223).

These alternative models provide flexibility in choosing the most suitable IC for specific power management applications.

Word count: 610 words

10 pirs û bersivên hevpar ên têkildarî sepana NCP1014ST100T3 di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of NCP1014ST100T3 in technical solutions:

  1. Q: What is NCP1014ST100T3? A: NCP1014ST100T3 is a high-performance integrated circuit (IC) designed for offline flyback converters used in power supply applications.

  2. Q: What is the input voltage range for NCP1014ST100T3? A: The input voltage range for NCP1014ST100T3 is typically between 85V and 265V AC.

  3. Q: What is the maximum output power that NCP1014ST100T3 can handle? A: NCP1014ST100T3 can handle a maximum output power of up to 25W.

  4. Q: Can NCP1014ST100T3 be used in both isolated and non-isolated power supply designs? A: Yes, NCP1014ST100T3 can be used in both isolated and non-isolated power supply designs.

  5. Q: Does NCP1014ST100T3 have built-in protection features? A: Yes, NCP1014ST100T3 includes various protection features such as overvoltage protection, overload protection, and thermal shutdown.

  6. Q: What is the switching frequency of NCP1014ST100T3? A: The switching frequency of NCP1014ST100T3 is typically around 65kHz.

  7. Q: Can NCP1014ST100T3 operate in continuous or discontinuous conduction mode? A: NCP1014ST100T3 can operate in both continuous and discontinuous conduction modes, depending on the load conditions.

  8. Q: Is NCP1014ST100T3 suitable for low-power applications? A: Yes, NCP1014ST100T3 is suitable for low-power applications as it offers excellent efficiency at light loads.

  9. Q: Does NCP1014ST100T3 require an external MOSFET for operation? A: Yes, NCP1014ST100T3 requires an external MOSFET to function as a switch in the flyback converter topology.

  10. Q: What are the typical applications of NCP1014ST100T3? A: NCP1014ST100T3 is commonly used in various applications such as LED lighting, consumer electronics, industrial power supplies, and home appliances.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.