ON Semiconductor
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
NCS20062DMR2G
Binêre Detail DataSheets

NCS20062DMR2G

Product Overview

Category

NCS20062DMR2G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management applications.

Characteristics

  • High efficiency
  • Low power consumption
  • Compact size
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

NCS20062DMR2G is available in a small outline package (SOP) format.

Essence

The essence of this product lies in its ability to efficiently regulate and control power supply in electronic devices.

Packaging/Quantity

NCS20062DMR2G is typically packaged in reels, with each reel containing a specific quantity of ICs.

Specifications

  • Input Voltage Range: 4.5V - 40V
  • Output Voltage Range: 0.8V - 37V
  • Maximum Output Current: 1.5A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The NCS20062DMR2G IC has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. EN: Enable pin
  5. SW: Switching pin
  6. VOUT: Output voltage pin

Functional Features

  • Step-down (buck) converter
  • Adjustable output voltage
  • Soft-start function
  • Overcurrent protection
  • Thermal shutdown protection
  • Under-voltage lockout (UVLO) protection

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power loss
  • Wide input voltage range allows for versatile applications
  • Compact size enables integration into space-constrained designs
  • Overcurrent and thermal protection enhance device safety

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Higher cost compared to non-integrated power management solutions

Working Principles

NCS20062DMR2G operates as a step-down converter, converting a higher input voltage to a lower output voltage. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage. The feedback pin (FB) is used to adjust the desired output voltage, while the enable pin (EN) controls the ON/OFF state of the converter.

Detailed Application Field Plans

NCS20062DMR2G finds applications in various electronic devices, including but not limited to: - Mobile devices - Automotive electronics - Industrial equipment - Home appliances - Power supplies

Detailed and Complete Alternative Models

  1. NCP1529: Similar step-down converter IC with adjustable output voltage and higher maximum output current.
  2. LM2596: Non-integrated buck converter module with adjustable output voltage and higher maximum output current.
  3. TPS5430: Integrated buck converter IC with adjustable output voltage and higher switching frequency.

These alternative models offer similar functionalities to NCS20062DMR2G but may have different specifications and package options.

In conclusion, NCS20062DMR2G is a versatile integrated circuit used for power management applications. Its high efficiency, compact size, and wide input voltage range make it suitable for various electronic devices. However, its limited maximum output current and higher cost should be considered when selecting alternative models.

10 pirs û bersivên hevpar ên têkildarî sepana NCS20062DMR2G di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of NCS20062DMR2G in technical solutions:

  1. Q: What is NCS20062DMR2G? A: NCS20062DMR2G is a specific model number for a power management integrated circuit (PMIC) developed by ON Semiconductor.

  2. Q: What are the key features of NCS20062DMR2G? A: Some key features of NCS20062DMR2G include multiple voltage regulators, power sequencing, overvoltage protection, and thermal shutdown.

  3. Q: What applications can NCS20062DMR2G be used for? A: NCS20062DMR2G is commonly used in various technical solutions such as industrial automation, consumer electronics, automotive systems, and IoT devices.

  4. Q: How many voltage regulators does NCS20062DMR2G have? A: NCS20062DMR2G has two voltage regulators, which can provide different output voltages based on the requirements of the system.

  5. Q: Can NCS20062DMR2G handle high input voltages? A: Yes, NCS20062DMR2G can handle input voltages up to a certain limit, typically around 40V.

  6. Q: Does NCS20062DMR2G support power sequencing? A: Yes, NCS20062DMR2G supports power sequencing, allowing controlled startup and shutdown of different power rails in a system.

  7. Q: What is overvoltage protection in NCS20062DMR2G? A: Overvoltage protection in NCS20062DMR2G ensures that the output voltage does not exceed a predefined threshold, protecting the system from damage.

  8. Q: How does NCS20062DMR2G handle thermal issues? A: NCS20062DMR2G has built-in thermal shutdown protection, which activates when the temperature exceeds a certain limit, preventing overheating.

  9. Q: Can NCS20062DMR2G be used in battery-powered devices? A: Yes, NCS20062DMR2G can be used in battery-powered devices as it supports low-power operation and has efficient power conversion capabilities.

  10. Q: Is NCS20062DMR2G readily available in the market? A: Yes, NCS20062DMR2G is a commonly available PMIC and can be purchased from authorized distributors or directly from the manufacturer's website.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of NCS20062DMR2G.