Power Integrations
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
LNK363DN-TL
Binêre Detail DataSheets

LNK363DN-TL

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low power consumption - High efficiency - Compact size - Wide input voltage range - Over-temperature protection - Over-voltage protection

Package: DFN-8 (Dual Flat No-Lead)

Essence: LNK363DN-TL is a power management IC designed for efficient power conversion in various electronic devices.

Packaging/Quantity: The LNK363DN-TL is typically sold in reels containing 3000 units per reel.

Specifications

  • Input Voltage Range: 85V AC to 265V AC
  • Output Voltage: 5V DC
  • Output Current: Up to 1.2A
  • Switching Frequency: 132 kHz
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The LNK363DN-TL features the following pin configuration:

  1. VDD: Power supply input
  2. BP/M: Bypass/Multifunction pin
  3. FB: Feedback pin
  4. GND: Ground
  5. D: Drain pin
  6. S: Source pin
  7. NC: No Connection
  8. EN/UVLO: Enable/Undervoltage Lockout pin

Functional Features

  • Primary-side control eliminates the need for an optocoupler
  • Auto-restart protection feature for fault conditions
  • Frequency jittering reduces EMI emissions
  • Built-in thermal shutdown protection
  • Cycle-by-cycle current limit

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Simplified circuit design due to primary-side control - Enhanced safety with built-in protection features - Compact size allows for space-saving designs - Wide input voltage range accommodates various applications

Disadvantages: - Limited output current compared to some other power management ICs - Requires careful consideration of thermal management due to high operating temperature range

Working Principles

The LNK363DN-TL utilizes primary-side control to regulate the output voltage. It operates by sensing the feedback signal from the FB pin and adjusting the duty cycle of the internal power switch accordingly. This eliminates the need for an optocoupler, simplifying the circuit design and reducing cost.

Detailed Application Field Plans

The LNK363DN-TL is commonly used in the following applications:

  1. Power adapters for consumer electronics
  2. LED lighting systems
  3. Industrial power supplies
  4. Home appliances
  5. Battery chargers

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to LNK363DN-TL are:

  1. TNY274PN
  2. FAN7602B
  3. NCP1014AP065G
  4. TOP258PN
  5. UC3843BD1R2G

These models offer similar functionality and can be suitable replacements depending on specific requirements.

Word count: 345 words

10 pirs û bersivên hevpar ên têkildarî sepana LNK363DN-TL di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of LNK363DN-TL in technical solutions:

  1. Q: What is LNK363DN-TL? A: LNK363DN-TL is a highly integrated, energy-efficient, offline switcher IC designed for low-power applications.

  2. Q: What are the typical applications of LNK363DN-TL? A: LNK363DN-TL is commonly used in applications such as LED lighting, smart home devices, industrial controls, and consumer electronics.

  3. Q: What is the input voltage range supported by LNK363DN-TL? A: LNK363DN-TL supports an input voltage range of 85VAC to 265VAC.

  4. Q: What is the maximum output power that can be achieved with LNK363DN-TL? A: The maximum output power depends on the specific design and application, but typically ranges from 3W to 15W.

  5. Q: Does LNK363DN-TL require an external MOSFET? A: No, LNK363DN-TL integrates a high-voltage MOSFET, eliminating the need for an external one.

  6. Q: Can LNK363DN-TL operate in a constant current mode? A: Yes, LNK363DN-TL can be configured to operate in a constant current mode, making it suitable for driving LEDs.

  7. Q: Is LNK363DN-TL compatible with dimming functionality? A: Yes, LNK363DN-TL supports both analog and PWM dimming methods, allowing for easy integration into dimmable lighting systems.

  8. Q: What are the built-in protection features of LNK363DN-TL? A: LNK363DN-TL includes features such as output overvoltage protection, output short-circuit protection, and thermal shutdown.

  9. Q: Can LNK363DN-TL operate in a wide temperature range? A: Yes, LNK363DN-TL is designed to operate reliably in a temperature range of -40°C to 150°C.

  10. Q: Is LNK363DN-TL compliant with safety standards? A: Yes, LNK363DN-TL is compliant with various safety standards, including UL, CE, and IEC, ensuring its suitability for different markets.

Please note that these answers are general and may vary depending on the specific application and design considerations.