Rohm Semiconductor
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
ML8511-00FCZ05B
Binêre Detail DataSheets

ML8511-00FCZ05B

Product Overview

Category: UV Sensor
Use: Measures ultraviolet (UV) radiation intensity
Characteristics: High sensitivity, small size, low power consumption
Package: Surface-mount package
Essence: Converts UV light into an electrical signal
Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Spectral Range: 280nm to 390nm
  • Output Voltage Range: 0.1V to 3.3V
  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VDD: Power supply input
  2. GND: Ground connection
  3. OUT: Analog output

Functional Features

  • Converts UV light into an electrical signal
  • High sensitivity to UV radiation
  • Low power consumption

Advantages and Disadvantages

Advantages: - Small size - Wide spectral range - Low operating voltage

Disadvantages: - Limited output voltage range - Susceptible to interference from ambient light

Working Principles

The ML8511-00FCZ05B operates based on the photodiode principle. When exposed to UV light, the photodiode generates a current proportional to the UV intensity, which is then converted into an analog voltage output.

Detailed Application Field Plans

  1. UV Index Monitoring: Integration into weather stations for measuring UV index
  2. UV Exposure Measurement: Wearable devices for monitoring UV exposure levels
  3. UV Sterilization: Integration into sterilization equipment for monitoring UV intensity

Detailed and Complete Alternative Models

  1. SI1145-A10-GM: UV Index Sensor with I2C Interface
  2. GUVA-S12SD: UV Sensor Module with Analog Output
  3. VEML6075: Digital UV Index Sensor with I2C Interface

Note: The above alternative models offer different features and interfaces for UV sensing applications.

This completes the English editing encyclopedia entry structure for the ML8511-00FCZ05B UV sensor.

10 pirs û bersivên hevpar ên têkildarî sepana ML8511-00FCZ05B di çareseriyên teknîkî de navnîş bikin

Sure, here are 10 common questions and answers related to the application of ML8511-00FCZ05B in technical solutions:

  1. What is ML8511-00FCZ05B?

    • ML8511-00FCZ05B is a UV sensor module that can detect the intensity of UV light.

  2. How does ML8511-00FCZ05B work?

    • It works by converting UV light into an electrical signal, which can be measured and used for various applications.

  3. What are the typical applications of ML8511-00FCZ05B?

    • ML8511-00FCZ05B is commonly used in wearable devices, UV monitoring systems, and UV exposure measurement equipment.

  4. What is the operating voltage range of ML8511-00FCZ05B?

    • The operating voltage range is typically between 2.7V to 5.5V.

  5. What is the spectral response range of ML8511-00FCZ05B?

    • The spectral response range is typically between 280nm to 390nm.

  6. How accurate is ML8511-00FCZ05B in measuring UV intensity?

    • ML8511-00FCZ05B has a high accuracy and reliability in measuring UV intensity.

  7. Can ML8511-00FCZ05B be integrated with microcontrollers?

    • Yes, it can be easily integrated with microcontrollers such as Arduino, Raspberry Pi, and other embedded systems.

  8. Does ML8511-00FCZ05B require calibration?

    • Yes, it may require periodic calibration to maintain its accuracy over time.

  9. Is ML8511-00FCZ05B suitable for outdoor applications?

    • Yes, it is suitable for outdoor applications due to its robust design and UV detection capabilities.

  10. Are there any specific precautions to consider when using ML8511-00FCZ05B?

    • It is important to protect the sensor from direct exposure to water and to handle it with care to avoid damage to the sensitive components.

I hope these questions and answers provide a good overview of the application of ML8511-00FCZ05B in technical solutions. Let me know if you need further information on any specific aspect!