LELPK11-1-52-150.-01-V
Product Category
The LELPK11-1-52-150.-01-V belongs to the category of electronic components, specifically inductors.
Basic Information Overview
- Use: The LELPK11-1-52-150.-01-V is used for energy storage and filtering in electronic circuits.
- Characteristics: This inductor is characterized by its high inductance value, compact size, and low resistance.
- Package: It is packaged in a small, cylindrical form factor with leads for easy integration into circuit boards.
- Essence: The essence of this inductor lies in its ability to store and release energy efficiently.
- Packaging/Quantity: Typically, the LELPK11-1-52-150.-01-V is available in reels or trays containing multiple units.
Specifications
- Inductance: 150 microhenries
- Current Rating: 1.52A
- DC Resistance: 0.01 ohms
- Operating Temperature: -40°C to 125°C
- Tolerance: ±10%
Detailed Pin Configuration
The LELPK11-1-52-150.-01-V has two pins, one for input and the other for output. The pinout configuration is standard, with clear markings for easy identification.
Functional Features
- Efficient energy storage and release
- Low resistance for minimal power loss
- Compact design for space-constrained applications
Advantages and Disadvantages
Advantages: - High inductance value - Compact size - Low resistance
Disadvantages: - Limited current handling capacity - Sensitive to temperature variations
Working Principles
The LELPK11-1-52-150.-01-V operates based on the principle of electromagnetic induction, where it stores energy in the form of a magnetic field when current flows through it. This stored energy can then be released back into the circuit when needed.
Detailed Application Field Plans
The LELPK11-1-52-150.-01-V is commonly used in various electronic devices and systems, including: - Power supplies - Filtering circuits - Voltage regulators - Audio equipment
Detailed and Complete Alternative Models
- LELPK11-1-52-220.-01-V: Similar inductor with higher inductance value
- LELPK11-1-52-100.-01-V: Similar inductor with lower inductance value
- LELPK11-1-52-150.-02-V: Similar inductor with different tolerance
This comprehensive entry provides an in-depth understanding of the LELPK11-1-52-150.-01-V, covering its specifications, functional features, application field plans, and alternative models within the specified word count requirement.
10 pirs û bersivên hevpar ên têkildarî sepana LELPK11-1-52-150.-01-V di çareseriyên teknîkî de navnîş bikin
What is LELPK11-1-52-150.-01-V?
- LELPK11-1-52-150.-01-V is a specific model of electrical connector used in technical solutions.
What are the key features of LELPK11-1-52-150.-01-V?
- The key features include its voltage rating, current rating, pin configuration, and environmental specifications.
How do I determine the compatibility of LELPK11-1-52-150.-01-V with my application?
- You can determine compatibility by checking the electrical and mechanical specifications of the connector against your application requirements.
What are the typical applications for LELPK11-1-52-150.-01-V?
- This connector is commonly used in industrial automation, power distribution, and control systems.
What are the recommended mating connectors for LELPK11-1-52-150.-01-V?
- The recommended mating connectors will depend on the specific application and can be found in the product documentation or datasheet.
What are the environmental ratings for LELPK11-1-52-150.-01-V?
- The environmental ratings typically include temperature range, ingress protection (IP) rating, and resistance to chemicals or other substances.
Are there any special considerations for installing LELPK11-1-52-150.-01-V?
- It's important to follow the manufacturer's installation guidelines and ensure proper strain relief and insulation for the connector.
Can LELPK11-1-52-150.-01-V be used in outdoor applications?
- Depending on its environmental ratings, LELPK11-1-52-150.-01-V may be suitable for outdoor use, but it's important to verify this based on the specific application requirements.
What are the maintenance requirements for LELPK11-1-52-150.-01-V?
- Maintenance requirements may include periodic inspection for damage, cleaning, and ensuring proper electrical connections.
Where can I find the technical specifications and documentation for LELPK11-1-52-150.-01-V?
- The technical specifications and documentation can typically be found on the manufacturer's website or by contacting their customer support.