SI5338A-B01692-GM

Basic Information Overview

Category: Integrated Circuit (IC)
Use: Clock Generator and Multiplier
Characteristics:
- High-frequency performance
- Low jitter
- Programmable output frequencies
- Flexible clock distribution
Package: QFN (Quad Flat No-leads)
Essence: Clock generation and multiplication
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

Input Voltage Range: 2.375V to 3.63V
Output Frequency Range: 1kHz to 945MHz
Number of Outputs: 12
Supply Current: 100mA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

The SI5338A-B01692-GM has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage input | | 2 | GND | Ground | | 3 | XAXB | Differential clock input | | 4 | XAXC | Differential clock input | | 5 | XDXB | Differential clock input | | 6 | XDXC | Differential clock input | | 7 | CLKIN | Single-ended clock input | | 8 | SDA | I2C serial data input | | 9 | SCL | I2C serial clock input | | 10 | VDDO | Power supply voltage for outputs | | 11-22 | OUT0-OUT11 | Clock outputs |

Functional Characteristics

Clock Generation: The SI5338A-B01692-GM generates high-frequency clocks with low jitter.
Clock Multiplication: It can multiply the input clock frequency to provide multiple output frequencies.
Flexible Clock Distribution: The device allows flexible distribution of clocks to different outputs.
Programmable Output Frequencies: The output frequencies can be programmed through I2C interface.

Advantages and Disadvantages

Advantages: - High-frequency performance - Low jitter - Programmable output frequencies - Flexible clock distribution

Disadvantages: - Requires I2C interface for programming

Applicable Range of Products

The SI5338A-B01692-GM is suitable for applications that require high-frequency clock generation and multiplication, such as: - Telecommunications equipment - Networking devices - Data centers - Test and measurement instruments

Working Principles

The SI5338A-B01692-GM utilizes a phase-locked loop (PLL) to generate and multiply the input clock signal. The PLL locks onto the input frequency and generates multiple output clocks with programmable frequencies.

Detailed Application Field Plans

Telecommunications Equipment: The SI5338A-B01692-GM can be used in base stations and network switches to provide precise clock signals for synchronization.
Networking Devices: It can be utilized in routers and switches to generate clock signals for data transmission and synchronization.
Data Centers: The device can be employed in data center servers and storage systems to ensure accurate timing for data processing and storage operations.
Test and Measurement Instruments: It can be integrated into oscilloscopes and signal generators to provide stable and precise clock signals for accurate measurements.
Industrial Automation: The SI5338A-B01692-GM can be used in automation systems to synchronize various components and devices.

Detailed Alternative Models

Some alternative models to the SI5338A-B01692-GM are: - SI5338B-B01692-GM - SI5338C-B01692-GM - SI5338D-B01692-GM

5 Common Technical Questions and Answers

Q: What is the maximum output frequency of the SI5338A-B01692-GM? A: The maximum output frequency is 945MHz.
Q: Can I program the output frequencies through a microcontroller? A: Yes, you can use an I2C interface on your microcontroller to program the output frequencies.
Q: Does the SI5338A-B01692-GM support differential clock inputs? A: Yes, it supports both differential and single-ended clock inputs.
Q: What is the typical supply current required by the device? A: The typical supply current is 100mA.
Q: What is the operating temperature range of the SI5338A-B01692-GM? A: The device can operate within a temperature range of -40°C to +85°C.

This encyclopedia entry provides detailed information about the SI5338A-B01692-GM, including its basic information, specifications, pin configuration,