STMicroelectronics
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
ACS102-5T1
Binêre Detail DataSheets

ACS102-5T1

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: 25 pieces per tube

Specifications

  • Input Voltage: 4.5V to 20V
  • Output Voltage: 3.3V
  • Maximum Output Current: 5A
  • Dropout Voltage: 0.6V at 5A
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Adjustable Output Voltage

Advantages and Disadvantages

Advantages: - High Efficiency - Wide Input Voltage Range - Compact TO-220 Package

Disadvantages: - Higher Dropout Voltage Compared to Some Alternatives - Limited Output Voltage Options

Working Principles

The ACS102-5T1 is a linear voltage regulator that maintains a constant output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback mechanism to adjust the resistance in the circuit, ensuring a stable output.

Detailed Application Field Plans

The ACS102-5T1 is suitable for various applications requiring a stable 3.3V power supply, such as: - Microcontroller Systems - Industrial Control Systems - Automotive Electronics

Detailed and Complete Alternative Models

  1. LM317: Adjustable Output Voltage, Lower Dropout Voltage
  2. L7805: Fixed 5V Output, Lower Dropout Voltage
  3. LM1117: Low Dropout Voltage, Fixed 3.3V Output

In conclusion, the ACS102-5T1 is a versatile voltage regulator with high efficiency and a wide input voltage range, making it suitable for a variety of electronic applications. However, its relatively higher dropout voltage and limited output voltage options should be considered when selecting an appropriate voltage regulator for specific projects.

[Word Count: 271]

10 pirs û bersivên hevpar ên têkildarî sepana ACS102-5T1 di çareseriyên teknîkî de navnîş bikin

  1. What is ACS102-5T1?

    • ACS102-5T1 is a type of current sensor used for measuring AC and DC currents in technical solutions.

  2. How does ACS102-5T1 work?

    • ACS102-5T1 operates based on the principle of Hall effect, where it measures the magnetic field generated by the current passing through the conductor.

  3. What is the measurement range of ACS102-5T1?

    • The measurement range of ACS102-5T1 typically varies from -5A to +5A, making it suitable for a wide range of applications.

  4. What are the typical applications of ACS102-5T1?

    • ACS102-5T1 is commonly used in applications such as motor control, power management, and energy monitoring in various technical solutions.

  5. How accurate is ACS102-5T1 in measuring currents?

    • ACS102-5T1 offers high accuracy, typically within a few percentage points, making it reliable for precise current measurements.

  6. What are the output options of ACS102-5T1?

    • ACS102-5T1 provides analog output in the form of voltage or current proportional to the measured input current.

  7. Is ACS102-5T1 suitable for both AC and DC currents?

    • Yes, ACS102-5T1 is designed to measure both AC and DC currents effectively.

  8. Can ACS102-5T1 be integrated with microcontrollers or PLCs?

    • Yes, ACS102-5T1 can be easily interfaced with microcontrollers, PLCs, and other digital systems for data acquisition and control purposes.

  9. What are the key features of ACS102-5T1?

    • Some key features of ACS102-5T1 include low offset voltage, wide bandwidth, and galvanic isolation for enhanced safety.

  10. Are there any precautions to consider when using ACS102-5T1?

    • It's important to ensure proper insulation and mounting of ACS102-5T1 to prevent electrical hazards, and to follow the manufacturer's guidelines for optimal performance.