ACS102-6T1-TR
Product Overview
Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-263
Essence: Regulates voltage to a stable level
Packaging/Quantity: Tape & Reel, 2500 units
Specifications
- Input Voltage: 2.5V to 6.5V
- Output Voltage: 1.2V to 5.5V
- Dropout Voltage: 300mV at 1A
- Output Current: 1A
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- GND
- VOUT
- VIN
- NC (No Connection)
- EN (Enable)
- FB (Feedback)
Functional Features
- Low dropout voltage
- Thermal shutdown protection
- Overcurrent protection
- Short-circuit protection
- Fast transient response
Advantages and Disadvantages
Advantages: - Wide input voltage range - High efficiency - Small package size - Excellent line and load regulation
Disadvantages: - Limited output current compared to some competitors - Higher cost compared to traditional linear regulators
Working Principles
The ACS102-6T1-TR is a voltage regulator that maintains a stable output voltage by adjusting the input voltage. It uses a feedback loop to compare the actual output voltage with a reference voltage and adjusts the pass element to maintain the desired output.
Detailed Application Field Plans
The ACS102-6T1-TR is suitable for various applications requiring a stable voltage supply, such as: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems
Detailed and Complete Alternative Models
- LM1117
- LT1763
- ADP3338
In conclusion, the ACS102-6T1-TR is a versatile voltage regulator with high efficiency and low dropout voltage, making it suitable for a wide range of applications. Its compact package and robust features make it an attractive choice for designers seeking reliable voltage regulation solutions.
Word Count: 258
10 pirs û bersivên hevpar ên têkildarî sepana ACS102-6T1-TR di çareseriyên teknîkî de navnîş bikin
What is ACS102-6T1-TR?
- ACS102-6T1-TR is a high-performance, isolated current sensor designed for use in various technical solutions.
What is the operating principle of ACS102-6T1-TR?
- ACS102-6T1-TR operates on the principle of Hall effect sensing to measure AC and DC currents accurately.
What are the typical applications of ACS102-6T1-TR?
- ACS102-6T1-TR is commonly used in motor control, power management systems, renewable energy systems, and industrial automation.
What is the voltage range supported by ACS102-6T1-TR?
- ACS102-6T1-TR supports a wide voltage range, typically from 3.0V to 5.5V.
How accurate is ACS102-6T1-TR in current measurement?
- ACS102-6T1-TR offers high accuracy with low offset error and excellent linearity over its specified current range.
Does ACS102-6T1-TR provide galvanic isolation?
- Yes, ACS102-6T1-TR provides galvanic isolation, making it suitable for high-voltage applications.
What output interface does ACS102-6T1-TR offer?
- ACS102-6T1-TR provides an analog output proportional to the measured current, making it compatible with various signal processing circuits.
Is ACS102-6T1-TR suitable for harsh environments?
- Yes, ACS102-6T1-TR is designed to operate reliably in harsh industrial environments, with robust construction and high immunity to external interference.
Can ACS102-6T1-TR be used for both AC and DC current measurements?
- Yes, ACS102-6T1-TR is capable of accurately measuring both AC and DC currents, making it versatile for different applications.
Are there any special considerations for integrating ACS102-6T1-TR into a technical solution?
- When integrating ACS102-6T1-TR, attention should be paid to proper PCB layout, thermal management, and electromagnetic compatibility to ensure optimal performance.