Texas Instruments
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
SN74LVCC4245ADWE4
Binêre Detail DataSheets

SN74LVCC4245ADWE4

Product Overview

Category

SN74LVCC4245ADWE4 belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a bidirectional voltage level translator and bus transceiver.

Characteristics

  • Voltage Level Translation: SN74LVCC4245ADWE4 can translate signals from one voltage level to another, making it suitable for interfacing between devices operating at different voltage levels.
  • Bidirectional Communication: It supports bidirectional data transfer, allowing data to be transmitted in both directions.
  • High-Speed Operation: The IC operates at high speeds, enabling efficient data transmission.
  • Low Power Consumption: It is designed to consume low power, making it energy-efficient.
  • ESD Protection: SN74LVCC4245ADWE4 provides electrostatic discharge (ESD) protection, safeguarding the connected devices against damage.

Package

SN74LVCC4245ADWE4 comes in a standard SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of SN74LVCC4245ADWE4 lies in its ability to facilitate voltage level translation and bidirectional communication, ensuring seamless data transfer between devices operating at different voltage levels.

Packaging/Quantity

The IC is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of SN74LVCC4245ADWE4 units. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Data Rate: 100Mbps
  • Number of Channels: 8
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of SN74LVCC4245ADWE4 is as follows:

  1. A1
  2. B1
  3. GND
  4. B2
  5. A2
  6. OE#
  7. VCC
  8. B3
  9. A3
  10. B4
  11. A4
  12. B5
  13. A5
  14. B6
  15. A6
  16. B7
  17. A7
  18. B8
  19. A8
  20. VCCB
  21. DIR
  22. GND
  23. BDIR
  24. VCCA

Functional Features

  • Bidirectional Voltage Level Translation: SN74LVCC4245ADWE4 can translate signals from one voltage level to another bidirectionally, allowing seamless communication between devices operating at different voltage levels.
  • Direction Control: The DIR and BDIR pins control the direction of data flow, enabling flexible data transmission.
  • Output Enable: The OE# pin enables or disables the outputs, providing control over the IC's operation.

Advantages and Disadvantages

Advantages

  • Efficient Voltage Level Translation: SN74LVCC4245ADWE4 ensures reliable and efficient translation of signals between different voltage domains.
  • Bidirectional Communication: It supports bidirectional data transfer, making it suitable for applications requiring communication in both directions.
  • High-Speed Operation: The IC operates at high speeds, facilitating fast data transmission.
  • Low Power Consumption: SN74LVCC4245ADWE4 is designed to consume low power, contributing to energy efficiency.
  • ESD Protection: It provides protection against electrostatic discharge, enhancing the reliability of connected devices.

Disadvantages

  • Limited Data Rate: The maximum data rate of 100Mbps may not be sufficient for certain high-speed applications.
  • Temperature Limitations: The operating temperature range of -40°C to +85°C may restrict its use in extreme temperature environments.

Working Principles

SN74LVCC4245ADWE4 works based on the principles of voltage level translation and bidirectional communication. It utilizes internal circuitry to convert signals from one voltage level to another, allowing seamless data transfer between devices operating at different voltage levels. The direction of data flow is controlled by the DIR and BDIR pins, while the OE# pin enables or disables the outputs.

Detailed Application Field Plans

SN74LVCC4245ADWE4 finds applications in various fields, including:

  1. Microcontroller Interfacing: It can be used to interface microcontrollers operating at different voltage levels, enabling communication between them.
  2. Industrial Automation: SN74LVCC4245ADWE4 facilitates voltage level translation in industrial automation systems, ensuring compatibility between different components.
  3. Communication Systems: It is suitable for bidirectional data transfer in communication systems, such as UART (Universal Asynchronous Receiver-Transmitter) interfaces.
  4. Consumer Electronics: The IC can be utilized in consumer electronics devices that require voltage level translation, such as smartphones, tablets, and

10 pirs û bersivên hevpar ên têkildarî sepana SN74LVCC4245ADWE4 di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of SN74LVCC4245ADWE4 in technical solutions:

  1. Q: What is SN74LVCC4245ADWE4? A: SN74LVCC4245ADWE4 is a bidirectional voltage level translator and voltage-level shifter integrated circuit (IC) commonly used in digital systems.

  2. Q: What is the purpose of SN74LVCC4245ADWE4? A: The purpose of SN74LVCC4245ADWE4 is to convert logic levels between different voltage domains, allowing communication between devices operating at different voltage levels.

  3. Q: What voltage levels can SN74LVCC4245ADWE4 handle? A: SN74LVCC4245ADWE4 can handle voltage levels from 1.65V to 5.5V, making it suitable for interfacing between various logic families such as TTL, CMOS, and LVCMOS.

  4. Q: How many bidirectional channels does SN74LVCC4245ADWE4 have? A: SN74LVCC4245ADWE4 has 8 bidirectional channels, allowing for simultaneous translation of up to 8 signals.

  5. Q: Can SN74LVCC4245ADWE4 be used for level shifting between different voltage domains? A: Yes, SN74LVCC4245ADWE4 is specifically designed for level shifting between different voltage domains, making it ideal for applications where multiple logic levels need to coexist.

  6. Q: Is SN74LVCC4245ADWE4 suitable for bi-directional communication? A: Yes, SN74LVCC4245ADWE4 supports bi-directional communication, enabling data transfer in both directions between devices.

  7. Q: What is the maximum data rate supported by SN74LVCC4245ADWE4? A: SN74LVCC4245ADWE4 can support data rates up to 100 Mbps, making it suitable for many high-speed digital communication applications.

  8. Q: Can SN74LVCC4245ADWE4 be used in mixed-voltage systems? A: Yes, SN74LVCC4245ADWE4 is commonly used in mixed-voltage systems where different components operate at different voltage levels.

  9. Q: Does SN74LVCC4245ADWE4 require external pull-up or pull-down resistors? A: No, SN74LVCC4245ADWE4 has built-in weak pull-up and pull-down resistors, eliminating the need for external resistors in most cases.

  10. Q: Are there any special considerations when using SN74LVCC4245ADWE4? A: It is important to ensure that the supply voltages applied to SN74LVCC4245ADWE4 are within its specified operating range. Additionally, proper decoupling capacitors should be used to minimize noise and ensure stable operation.

Please note that these answers are general and may vary depending on specific application requirements. Always refer to the datasheet and consult with an engineer for detailed information and guidance.