Texas Instruments
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
TPL9202PWPR
Binêre Detail DataSheets

TPL9202PWPR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: TSSOP-16
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 1.2V to 57V
  • Output Current: Up to 2A
  • Quiescent Current: 50µA
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TPL9202PWPR IC has a TSSOP-16 package with the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. COMP: Compensation Pin
  6. SS: Soft-Start Pin
  7. PGND: Power Ground
  8. SW: Switch Node
  9. SW: Switch Node
  10. VCC: Supply Voltage
  11. VCC: Supply Voltage
  12. VCC: Supply Voltage
  13. VCC: Supply Voltage
  14. VCC: Supply Voltage
  15. VCC: Supply Voltage
  16. VCC: Supply Voltage

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency and low power consumption
  • Adjustable output voltage through external resistors
  • Overcurrent protection and thermal shutdown
  • Soft-start function for controlled startup
  • Stable and reliable voltage regulation

Advantages and Disadvantages

Advantages: - Wide input voltage range allows for flexibility in various applications - High efficiency results in reduced power consumption - Overcurrent protection and thermal shutdown ensure safe operation - Soft-start function prevents excessive inrush current during startup

Disadvantages: - Limited output current of up to 2A may not be sufficient for high-power applications - TSSOP-16 package may require careful handling during assembly

Working Principles

The TPL9202PWPR is a voltage regulator IC that operates by converting an input voltage into a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The input voltage is first stepped down using a power MOSFET and an inductor, and then filtered to provide a stable output voltage. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the power MOSFET to maintain the desired output voltage.

Detailed Application Field Plans

The TPL9202PWPR is commonly used in various applications where efficient power management is required. Some of the typical application fields include:

  1. Industrial Automation: Power supply for control systems, motor drives, and sensors.
  2. Automotive Electronics: Voltage regulation for automotive lighting, infotainment systems, and engine control units.
  3. Telecommunications: Power management for base stations, routers, and network equipment.
  4. Consumer Electronics: Voltage regulation for smartphones, tablets, and portable devices.
  5. Renewable Energy: Power conversion for solar panels, wind turbines, and energy storage systems.

Detailed and Complete Alternative Models

  1. TPL9201PWPR: Similar specifications with a lower output current capability of 1A.
  2. TPL9203PWPR: Higher output current capability of 3A with similar features and pin configuration.
  3. TPL9204PWPR: Enhanced thermal performance and higher input voltage range compared to TPL9202PWPR.

These alternative models offer different output current capabilities and additional features to cater to specific application requirements.

Word count: 430 words

10 pirs û bersivên hevpar ên têkildarî sepana TPL9202PWPR di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of TPL9202PWPR in technical solutions:

  1. Q: What is TPL9202PWPR? A: TPL9202PWPR is a power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of TPL9202PWPR? A: Some key features of TPL9202PWPR include multiple voltage regulators, current monitoring, fault detection, and protection mechanisms.

  3. Q: How can TPL9202PWPR be used in technical solutions? A: TPL9202PWPR can be used to manage power distribution, regulate voltages, monitor currents, and protect circuits in various applications.

  4. Q: What is the input voltage range supported by TPL9202PWPR? A: TPL9202PWPR supports an input voltage range of typically 2.7V to 5.5V.

  5. Q: Can TPL9202PWPR handle high current loads? A: Yes, TPL9202PWPR is capable of handling high current loads with its integrated power switches and current monitoring capabilities.

  6. Q: Does TPL9202PWPR have built-in protection features? A: Yes, TPL9202PWPR includes built-in protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Is TPL9202PWPR suitable for battery-powered applications? A: Yes, TPL9202PWPR is well-suited for battery-powered applications due to its low quiescent current and efficient power management capabilities.

  8. Q: Can TPL9202PWPR be controlled through a microcontroller? A: Yes, TPL9202PWPR can be controlled through a microcontroller using its I2C interface for configuration and monitoring.

  9. Q: Are there any evaluation boards available for TPL9202PWPR? A: Yes, Texas Instruments provides evaluation boards and reference designs to help developers quickly prototype and evaluate TPL9202PWPR in their applications.

  10. Q: Where can I find more information about TPL9202PWPR? A: You can find more detailed information about TPL9202PWPR, including datasheets, application notes, and technical documentation on the official Texas Instruments website or by contacting their support team.