Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
TPS61052DRCT

TPS61052DRCT

Product Overview

Category

The TPS61052DRCT belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators - switching regulators classification.

Use

This product is primarily used as a boost converter, which means it is designed to step up or increase the input voltage to a higher output voltage level. It is commonly employed in various electronic devices and systems where a higher voltage level is required for proper operation.

Characteristics

  • Boost converter IC
  • High efficiency
  • Wide input voltage range
  • Adjustable output voltage
  • Low quiescent current
  • Over-temperature protection
  • Short-circuit protection

Package

The TPS61052DRCT is available in a small outline package (SOT-23-6) which provides compactness and ease of integration into different circuit designs.

Essence

The essence of the TPS61052DRCT lies in its ability to efficiently convert lower input voltages to higher output voltages, making it suitable for applications that require a higher power supply.

Packaging/Quantity

The TPS61052DRCT is typically packaged in reels, with each reel containing 3000 units of the IC.

Specifications

  • Input Voltage Range: 1.8V to 6V
  • Output Voltage Range: 2.5V to 12V
  • Switching Frequency: Up to 1.2MHz
  • Quiescent Current: 17µA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-6

Detailed Pin Configuration

The TPS61052DRCT has six pins arranged as follows:

```


| | --| VIN SW |-- --| GND FB |-- --| EN VOUT|-- |___________| ```

  1. VIN: Input voltage pin
  2. SW: Switching node pin
  3. GND: Ground pin
  4. FB: Feedback pin
  5. EN: Enable pin
  6. VOUT: Output voltage pin

Functional Features

  • High efficiency conversion
  • Adjustable output voltage through feedback pin
  • Enable pin for power management control
  • Over-temperature protection to prevent damage
  • Short-circuit protection for added safety

Advantages and Disadvantages

Advantages

  • High efficiency conversion leads to reduced power loss
  • Wide input voltage range allows for versatile applications
  • Compact package size enables integration in space-constrained designs
  • Over-temperature and short-circuit protection enhance reliability and safety

Disadvantages

  • Limited maximum output voltage range (up to 12V)
  • Requires external components for proper operation
  • Higher switching frequency may introduce electromagnetic interference (EMI) concerns

Working Principles

The TPS61052DRCT operates as a boost converter by utilizing an internal switch to control the energy transfer from the input to the output. When the switch is closed, energy is stored in an inductor, and when it opens, the stored energy is transferred to the output capacitor, resulting in a higher output voltage.

The feedback pin monitors the output voltage and adjusts the duty cycle of the internal switch to maintain the desired output voltage level. The enable pin provides control over the device's operation, allowing for power management and shutdown when necessary.

Detailed Application Field Plans

The TPS61052DRCT finds application in various fields, including but not limited to:

  1. Battery-powered devices: Used to step up battery voltage to power higher voltage components.
  2. Portable electronics: Enables efficient power conversion for devices such as smartphones, tablets, and portable audio players.
  3. LED lighting: Provides the necessary voltage boost for driving LED arrays or strips.
  4. Industrial automation: Used in control systems and sensors that require higher voltage levels.

Detailed and Complete Alternative Models

  1. TPS61050DRCT
  2. TPS61051DRCT
  3. TPS61053DRCT
  4. TPS61054DRCT
  5. TPS61055DRCT

These alternative models offer similar functionality and characteristics to the TPS61052DRCT, providing options for different design requirements and specifications.

Word count: 536 words

10 pirs û bersivên hevpar ên têkildarî sepana TPS61052DRCT di çareseriyên teknîkî de navnîş bikin

  1. Question: What is the input voltage range for TPS61052DRCT?
    Answer: The input voltage range for TPS61052DRCT is 0.7V to 6V.

  2. Question: What is the typical output current capability of TPS61052DRCT?
    Answer: The typical output current capability of TPS61052DRCT is 400mA.

  3. Question: Can TPS61052DRCT be used in battery-powered applications?
    Answer: Yes, TPS61052DRCT is suitable for battery-powered applications due to its low input voltage and high efficiency.

  4. Question: What is the switching frequency of TPS61052DRCT?
    Answer: The switching frequency of TPS61052DRCT is typically 1.2MHz.

  5. Question: Is TPS61052DRCT suitable for boosting voltage in portable devices?
    Answer: Yes, TPS61052DRCT is designed for boosting voltage in portable devices such as smartphones and tablets.

  6. Question: Does TPS61052DRCT have built-in overcurrent protection?
    Answer: Yes, TPS61052DRCT features built-in overcurrent protection to ensure safe operation.

  7. Question: What is the operating temperature range of TPS61052DRCT?
    Answer: TPS61052DRCT can operate within a temperature range of -40°C to 85°C.

  8. Question: Can TPS61052DRCT be used in automotive applications?
    Answer: Yes, TPS61052DRCT is suitable for automotive applications, given its wide input voltage range and robust design.

  9. Question: What type of package does TPS61052DRCT come in?
    Answer: TPS61052DRCT is available in a small 6-pin WSON package for space-constrained designs.

  10. Question: Does TPS61052DRCT require external compensation components?
    Answer: No, TPS61052DRCT features internal compensation, eliminating the need for external compensation components.